f940be1a2b65e84d32a5b82d8e72e47303801f01
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F. 2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0. 3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0 on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup. Save your settings to cause the changes to be remembered. The Auto Run system re-arms upon using the 'Cold Boot' menu item. 4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the max value of 63. Specifically '>' was changed to '>=' the DTOA values. This fixes DonPan and is verified in Diagnostics 2.0. 5. HiRES[3] is used to enable some of the higher resolution graphics modes Gary Becker designed into CoCo3FPGA, and while these are not fully supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt the graphics engine. For some reason Color File II manipultes this bit and was causing it not to work. This change requires the SG6 extensions to be enabled to set HiRES[3]. So specifically in the Video Settings insure CoCo3 LC is set to Yes. Color File II now works properly.
CoCo3 Mister
CoCo3FPGA port to MiSTer
This is a port of Gary Becker's famous CoCo3 in an FPGA to the MiSTer platform by Stan Hodge, Gary Becker and Alan Steremberg.
Roms Needed
- boot0.rom - 32K coco3 rom
- boot1.rom - 8K Disk extended color basic rom
Note: This core requires the external sdram memory module (128M) to function.
Rename your roms, and place them in the games/CoCo3/ directory otherwise you will get a black screen
Description
CoCo 3 Plus FPGA core for MiSTer
22 MiB
0 Stars
1 Watchers
0 Forks
Languages
VHDL
52.8%
Verilog
23.6%
SystemVerilog
16.6%
Python
5.3%
Tcl
1.6%