aae1ceabf1f19de2c88dcd50314ce37237e366f8
Two bugs kept the FujiNet HDB-DOS SY6551 carts from working:
- $FF68-$FF6B were decoded only when the Multi-Pak I/O select was slot 1
(MPI_SCS == 0), which the OSD cannot select. With the cart in slot 3 the
6551 was unreachable: HDB-DOS polled status forever and sent nothing. On a
real CoCo the SCS line covers only $FF40-$FF5F and the RS-232 Pak decodes
$FF68 itself, so it now answers in any slot.
- With CTL bit 4 = 0 ("external receive clock") the receiver ran off the fixed
1.8475 MHz enable, i.e. 115,200 baud. HDBDW3L3_19200.CCC writes CTL=$0F, so
it transmitted at 19,200 and received at 115,200 -- every DriveWire sector
failed its checksum. The receiver now uses the baud generator (RX_CLK =
TX_CLK); unchanged for CTL=$1x and for baud select 0.
Verified in the Verilator sim against the real FujiNet daemon (FujiNet-PC):
the L3 cart at 19,200 loads FujiNet CONFIG with no checksum errors.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
CoCo3 Mister
CoCo3FPGA port to MiSTer
This is a port of Gary Becker's famous CoCo3 in an FPGA to the MiSTer platform by Stan Hodge, Gary Becker and Alan Steremberg.
Roms Needed
- boot0.rom - 32K coco3 rom
- boot1.rom - 8K Disk extended color basic rom
Note: This core requires the external sdram memory module (128M) to function.
Rename your roms, and place them in the games/CoCo3/ directory otherwise you will get a black screen
Description
CoCo 3 Plus FPGA core for MiSTer
22 MiB
0 Stars
1 Watchers
0 Forks
Languages
VHDL
52.8%
Verilog
23.6%
SystemVerilog
16.6%
Python
5.3%
Tcl
1.6%