verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule, screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette, and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA trace) with a minimal DriveWire server and a script to run the real FujiNet daemon against the sim. See verilator/README.md. - The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809). - sdram2.sv is simulated with its own controller logic and an SDR chip model. - run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on the text screen and byte-for-byte against test-ref/ screenshots. rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of inside generate blocks. They are assigned outside those blocks; Quartus accepted it, Verilator rejected spt_addr and silently split buff_wr into a separate net. No change on the FPGA (FM-7 made the same fix). Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
19 lines
775 B
C++
19 lines
775 B
C++
#pragma once
|
|
#include <cstdint>
|
|
#include <cstddef>
|
|
|
|
// Motorola 6809 disassembler.
|
|
//
|
|
// `read_byte` returns 0..255, or -1 for an address whose contents are not
|
|
// known. The sim feeds it a shadow of every byte the CPU has actually put on
|
|
// the bus, so unknown means "the CPU never fetched or wrote this" -- which is
|
|
// itself informative, and prints as "??".
|
|
//
|
|
// Returns the instruction length in bytes (1..5), and writes the mnemonic and
|
|
// operand to `out`. On an unknown opcode it emits "FCB $xx" and returns 1, so a
|
|
// caller walking a byte stream always makes progress.
|
|
int dis6809(uint16_t pc, int (*read_byte)(uint16_t), char* out, size_t outlen);
|
|
|
|
// Human-readable CC, e.g. "EFHINZVC" with cleared flags lower-cased.
|
|
void cc6809_string(uint8_t cc, char out[9]);
|