Add original-firmware Sound & Speech, four configurable Multi-Pak sockets, bounded per-slot ROM allocation and a nine-page menu organized around devices and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit conditional external-I/O timing contracts. Preserve native Main startup-file ordering, saved layouts, stock-core separation and the coco3plus media profile. Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh Quartus builds, functional and fitted timing checks, reviewed release packaging and passwordless SSH installation with backups. Retain original component notices, document contribution copyright and keep SSC ROM inputs outside Git. Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs, 368 both-corner timing scopes and eight tooling-integrity checks pass. The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready. Physical cold power cycling and conditional board-delay assumptions remain separate. Full original upstream histories are preserved before this single consolidated implementation commit.
88 lines
3.5 KiB
Systemverilog
88 lines
3.5 KiB
Systemverilog
`timescale 1ns/1ps
|
|
// Pin-command minimum intervals, independent of the controller's state encoding.
|
|
module external_sdram_commands_tb;
|
|
reg clk=0,init=1,req=0,rnw=0;
|
|
always #4.365079 clk=~clk;
|
|
wire [15:0] dq;
|
|
assign dq=rnw ? 16'h965a : 16'hzzzz;
|
|
wire [12:0] address;
|
|
wire [1:0] bank;
|
|
wire cs,ras,cas,we,memclk,ack,ready;
|
|
reg [24:0] cpu_address=0;
|
|
integer commands=0,activates=0,writes=0,reads=0,refreshes=0;
|
|
realtime released=0, next_command=0;
|
|
realtime last_active[0:3],next_active[0:3];
|
|
realtime now_time, earliest;
|
|
realtime last_refresh=-1;
|
|
reg configured=0;
|
|
integer b,j,timeout;
|
|
reg started=0;
|
|
sdram_probe dut(.init(init),.clk(clk),.SDRAM_DQ(dq),.SDRAM_A(address),.SDRAM_BA(bank),
|
|
.SDRAM_nCS(cs),.SDRAM_nRAS(ras),.SDRAM_nCAS(cas),.SDRAM_nWE(we),.SDRAM_CLK(memclk),
|
|
.sdram_cpu_addr(cpu_address),.sdram_cpu_din(8'h5a),.sdram_cpu_req(req),.sdram_cpu_rnw(rnw),
|
|
.sdram_cpu_ack(ack),.sdram_cpu_ready(ready),.sdram_vid_addr(25'd0),.sdram_vid_req(1'b0));
|
|
initial for(b=0;b<4;b=b+1) begin last_active[b]=-1000000;next_active[b]=0;end
|
|
always @(posedge memclk) if(!init && {ras,cas,we}!==3'b111) begin
|
|
now_time=$realtime;
|
|
if(!started) begin
|
|
if(!$test$plusargs("IGNORE_STARTUP") && now_time-released<200000)
|
|
$fatal(1,"SDRAM startup below 200 us: %0.3f ns",now_time-released);
|
|
started=1;
|
|
end
|
|
if(now_time+0.001<next_command) $fatal(1,"SDRAM refresh/precharge/mode recovery");
|
|
commands=commands+1;
|
|
case({ras,cas,we})
|
|
3'b011: begin
|
|
if(!$test$plusargs("IGNORE_TRC") && now_time-last_active[bank]<63.0) $fatal(1,"SDRAM tRC below 63 ns: %0.3f",now_time-last_active[bank]);
|
|
if(!$test$plusargs("IGNORE_TRC") && now_time+0.001<next_active[bank]) $fatal(1,"SDRAM auto-precharge recovery");
|
|
last_active[bank]=now_time;activates=activates+1;
|
|
end
|
|
3'b101,3'b100: begin
|
|
if(now_time-last_active[bank]<21.0) $fatal(1,"SDRAM tRCD below 21 ns");
|
|
if({ras,cas,we}==3'b100) begin
|
|
writes=writes+1;earliest=now_time+14.0;
|
|
end else begin
|
|
reads=reads+1;earliest=now_time+2.0*8.730158;
|
|
end
|
|
if(earliest<last_active[bank]+42.0) earliest=last_active[bank]+42.0;
|
|
if(address[10]) next_active[bank]=earliest+21.0;
|
|
end
|
|
3'b010: next_command=now_time+21.0;
|
|
3'b001: begin
|
|
next_command=now_time+63.0;refreshes=refreshes+1;
|
|
if(configured) begin
|
|
if(last_refresh>=0 && now_time-last_refresh>7812.5) $fatal(1,"SDRAM refresh interval above 7812.5 ns: %0.3f",now_time-last_refresh);
|
|
last_refresh=now_time;
|
|
end
|
|
end
|
|
3'b000: begin next_command=now_time+14.0;configured=1;end
|
|
endcase
|
|
end
|
|
task transfer(input bit read_mode,input [24:0] addr);
|
|
begin
|
|
@(negedge clk);rnw=read_mode;cpu_address=addr;req=1;
|
|
timeout=0;
|
|
while(!ack && timeout<40000) begin @(negedge clk);timeout=timeout+1;end
|
|
if(timeout==40000) $fatal(1,"SDRAM request timeout");
|
|
req=0;
|
|
while(ack) @(negedge clk);
|
|
if(read_mode) begin
|
|
timeout=0;
|
|
while(!ready && timeout<100) begin @(negedge clk);timeout=timeout+1;end
|
|
if(timeout==100) $fatal(1,"SDRAM read timeout");
|
|
end
|
|
end
|
|
endtask
|
|
initial begin
|
|
repeat(10) @(negedge clk);
|
|
init=0;released=$realtime;
|
|
// Legal held-until-ACK requests may be queued during startup.
|
|
for(j=0;j<128;j=j+1) transfer(0,{9'd0,j[7:0],8'd0});
|
|
for(j=0;j<32;j=j+1) transfer(1,{9'd0,j[7:0],8'd0});
|
|
repeat(50000) @(negedge clk);
|
|
if(writes!=128 || reads!=32 || refreshes<3) $fatal(1,"Incomplete command coverage");
|
|
$display("PASS SDRAM command intervals: startup >=200us, %0d ACT, %0d WR, %0d RD, %0d REF",activates,writes,reads,refreshes);
|
|
$finish;
|
|
end
|
|
endmodule
|