Add original-firmware Sound & Speech, four configurable Multi-Pak sockets, bounded per-slot ROM allocation and a nine-page menu organized around devices and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit conditional external-I/O timing contracts. Preserve native Main startup-file ordering, saved layouts, stock-core separation and the coco3plus media profile. Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh Quartus builds, functional and fitted timing checks, reviewed release packaging and passwordless SSH installation with backups. Retain original component notices, document contribution copyright and keep SSC ROM inputs outside Git. Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs, 368 both-corner timing scopes and eight tooling-integrity checks pass. The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready. Physical cold power cycling and conditional board-delay assumptions remain separate. Full original upstream histories are preserved before this single consolidated implementation commit.
107 lines
3.8 KiB
Systemverilog
107 lines
3.8 KiB
Systemverilog
// Original Coco 3 Plus contributions: Copyright (c) 2026 Brian K. Holman.
|
|
// Original component notices/terms retained; see COPYRIGHT.md and LICENSING.md.
|
|
// SPDX-License-Identifier: BSD-3-Clause
|
|
// AY-3-8913 behavioral hardware port for Coco 3 Plus.
|
|
// Reference: VCCPlus a8a84f22 src/devices/ssc/ay8913.{h,cpp}; see LICENSE.
|
|
// The reference volume table is a logarithmic approximation, not silicon data.
|
|
// clock_enable pulses once per AY INPUT clock; internal generators divide by 8.
|
|
// Same-edge register writes follow generator advancement using old registers.
|
|
// sample_sum is the unnormalized three-channel sum, with two pipeline stages.
|
|
// The future SSC mixer applies /3 normalization, gain, filtering and routing.
|
|
module ssc_ay8913(
|
|
input wire clk,reset,clock_enable,
|
|
input wire reg_select,reg_write,
|
|
input wire [7:0] bus_data,
|
|
output wire [7:0] read_data,
|
|
output reg [17:0] sample_sum
|
|
);
|
|
reg [7:0] registers[0:15];
|
|
reg [3:0] selected;
|
|
reg [2:0] divider;
|
|
reg [11:0] tone_counter[0:2];
|
|
reg [2:0] tone_output;
|
|
reg [4:0] noise_counter;
|
|
reg [16:0] noise_lfsr;
|
|
reg [15:0] env_counter;
|
|
reg [5:0] env_step;
|
|
reg env_up,env_holding;
|
|
reg [15:0] level[0:2];
|
|
wire [11:0] tone_period[0:2];
|
|
wire [4:0] noise_period=registers[6][4:0];
|
|
wire [15:0] env_period={registers[12],registers[11]};
|
|
wire [4:0] env_position=env_up?env_step[4:0]:~env_step[4:0];
|
|
wire [3:0] env_level=(!registers[13][3] && env_holding)?4'd0:env_position[4:1];
|
|
assign read_data=registers[selected];
|
|
|
|
function [15:0] volume(input [3:0] index);
|
|
begin
|
|
case(index)
|
|
0:volume=0;1:volume=1304;2:volume=1642;3:volume=2067;
|
|
4:volume=2603;5:volume=3277;6:volume=4125;7:volume=5193;
|
|
8:volume=6538;9:volume=8231;10:volume=10362;11:volume=13045;
|
|
12:volume=16422;13:volume=20675;14:volume=26028;15:volume=32767;
|
|
endcase
|
|
end
|
|
endfunction
|
|
genvar ch;
|
|
generate for(ch=0;ch<3;ch=ch+1) begin:channels
|
|
assign tone_period[ch]={registers[ch*2+1][3:0],registers[ch*2]};
|
|
wire gate=(registers[7][ch] || tone_output[ch]) &&
|
|
(registers[7][ch+3] || noise_lfsr[0]);
|
|
wire [3:0] amplitude=registers[ch+8][4]?env_level:registers[ch+8][3:0];
|
|
always @(posedge clk) begin
|
|
if(reset) level[ch]<=0;
|
|
else level[ch]<=gate?volume(amplitude):16'd0;
|
|
end
|
|
end endgenerate
|
|
integer i;
|
|
always @(posedge clk) begin
|
|
if(reset) begin
|
|
selected<=0;divider<=0;tone_output<=3'b111;
|
|
noise_counter<=0;noise_lfsr<=17'd1;
|
|
env_counter<=0;env_step<=0;env_up<=1;env_holding<=0;
|
|
sample_sum<=0;
|
|
for(i=0;i<16;i=i+1) registers[i]<=0;
|
|
for(i=0;i<3;i=i+1) tone_counter[i]<=0;
|
|
end else begin
|
|
sample_sum<={2'b0,level[0]}+{2'b0,level[1]}+{2'b0,level[2]};
|
|
if(clock_enable) begin
|
|
divider<=divider+1'b1;
|
|
if(divider==3'd7) begin
|
|
for(i=0;i<3;i=i+1) begin
|
|
if(tone_counter[i]>=(tone_period[i]==0?12'd0:tone_period[i]-12'd1)) begin
|
|
tone_counter[i]<=0;tone_output[i]<=!tone_output[i];
|
|
end else tone_counter[i]<=tone_counter[i]+1'b1;
|
|
end
|
|
if(noise_counter>=(noise_period==0?5'd0:noise_period-5'd1)) begin
|
|
noise_counter<=0;
|
|
noise_lfsr<={noise_lfsr[0]^noise_lfsr[3],noise_lfsr[16:1]};
|
|
end else noise_counter<=noise_counter+1'b1;
|
|
if(env_counter>=(env_period==0?16'd0:env_period-16'd1)) begin
|
|
env_counter<=0;
|
|
if(!env_holding) begin
|
|
if(env_step==6'd31) begin
|
|
if(!registers[13][3]) begin env_step<=32;env_holding<=1;end
|
|
else if(registers[13][0]) begin
|
|
env_step<=31;env_holding<=1;
|
|
if(registers[13][1]) env_up<=!env_up;
|
|
end else begin
|
|
env_step<=0;
|
|
if(registers[13][1]) env_up<=!env_up;
|
|
end
|
|
end else env_step<=env_step+1'b1;
|
|
end
|
|
end else env_counter<=env_counter+1'b1;
|
|
end
|
|
end
|
|
if(reg_select) selected<=bus_data[3:0];
|
|
if(reg_write) begin
|
|
registers[selected]<=bus_data;
|
|
if(selected==4'd13) begin
|
|
env_step<=0;env_holding<=0;env_up<=bus_data[2];
|
|
end
|
|
end
|
|
end
|
|
end
|
|
endmodule
|