1. Added support for cassette save. To use: A) You have to have a file [anyname.cas] which is larger than needed. B) Select the file through the UI Menu 'Save Cassette'. C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"' E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write. The file can now be loaded or copied. Note a dummy file of a specific size can be created in the MiSTer SSH shell in the /media/fat/games/coco3 with the command: 'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length] 2. Fixed serial interrupt [6551] to not be functional on slot 3 [carts]. 3. Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used for logic analyzer debug. This will only occur when `define Config_Debug is enabled in config.v. 4. Fixed MUGS of powerup issue occurring on some MiSTer units. 5. Fixed incorrect application of GIME_IRQ on legacy interrupts. Fixed race condition on reading IRQ status vs clearing the interrupt. 6. Improved Castle of Tharoggad. App now loads but locks as the graphics animate. This change improved mmu usage through to CARTS. 7. Builds now keep track of multiple builds in the same date. It shows as V240512-001 in the menus. Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is supplied in the archive to show how it works. 8. Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font - IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format. Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display a clock. 9. Large improvement in the Timer function. Code closer emulates COCO3 Timer. Fixes Sliphead cart. 10. In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for the FDC. This saved space but introduced a bug when using multiple drives at the same time - like a copy command. This change was removed and the copy command works again. To Do... 1. Add Speech / Music cart 2. Fix Castle of Tharoggad
766 lines
17 KiB
Systemverilog
766 lines
17 KiB
Systemverilog
//============================================================================
|
|
// CoCo3 port to MiSTer
|
|
// Copyright (c) 2019 Alan Steremberg - alanswx, Stan Hodge - MasterS3263827
|
|
//
|
|
//
|
|
//============================================================================
|
|
|
|
module emu
|
|
(
|
|
//Master input clock
|
|
input CLK_50M,
|
|
|
|
//Async reset from top-level module.
|
|
//Can be used as initial reset.
|
|
input RESET,
|
|
|
|
//Must be passed to hps_io module
|
|
inout [48:0] HPS_BUS,
|
|
|
|
//Base video clock. Usually equals to CLK_SYS.
|
|
output CLK_VIDEO,
|
|
|
|
//Multiple resolutions are supported using different CE_PIXEL rates.
|
|
//Must be based on CLK_VIDEO
|
|
output CE_PIXEL,
|
|
|
|
//Video aspect ratio for HDMI. Most retro systems have ratio 4:3.
|
|
//if VIDEO_ARX[12] or VIDEO_ARY[12] is set then [11:0] contains scaled size instead of aspect ratio.
|
|
output [12:0] VIDEO_ARX,
|
|
output [12:0] VIDEO_ARY,
|
|
|
|
output [7:0] VGA_R,
|
|
output [7:0] VGA_G,
|
|
output [7:0] VGA_B,
|
|
output VGA_HS,
|
|
output VGA_VS,
|
|
output VGA_DE, // = ~(VBlank | HBlank)
|
|
output VGA_F1,
|
|
output [1:0] VGA_SL,
|
|
output VGA_SCALER, // Force VGA scaler
|
|
output VGA_DISABLE, // analog out is off
|
|
|
|
input [11:0] HDMI_WIDTH,
|
|
input [11:0] HDMI_HEIGHT,
|
|
output HDMI_FREEZE,
|
|
|
|
`ifdef MISTER_FB
|
|
// Use framebuffer in DDRAM
|
|
// FB_FORMAT:
|
|
// [2:0] : 011=8bpp(palette) 100=16bpp 101=24bpp 110=32bpp
|
|
// [3] : 0=16bits 565 1=16bits 1555
|
|
// [4] : 0=RGB 1=BGR (for 16/24/32 modes)
|
|
//
|
|
// FB_STRIDE either 0 (rounded to 256 bytes) or multiple of pixel size (in bytes)
|
|
output FB_EN,
|
|
output [4:0] FB_FORMAT,
|
|
output [11:0] FB_WIDTH,
|
|
output [11:0] FB_HEIGHT,
|
|
output [31:0] FB_BASE,
|
|
output [13:0] FB_STRIDE,
|
|
input FB_VBL,
|
|
input FB_LL,
|
|
output FB_FORCE_BLANK,
|
|
|
|
`ifdef MISTER_FB_PALETTE
|
|
// Palette control for 8bit modes.
|
|
// Ignored for other video modes.
|
|
output FB_PAL_CLK,
|
|
output [7:0] FB_PAL_ADDR,
|
|
output [23:0] FB_PAL_DOUT,
|
|
input [23:0] FB_PAL_DIN,
|
|
output FB_PAL_WR,
|
|
`endif
|
|
`endif
|
|
|
|
output LED_USER, // 1 - ON, 0 - OFF.
|
|
|
|
// b[1]: 0 - LED status is system status OR'd with b[0]
|
|
// 1 - LED status is controled solely by b[0]
|
|
// hint: supply 2'b00 to let the system control the LED.
|
|
output [1:0] LED_POWER,
|
|
output [1:0] LED_DISK,
|
|
|
|
// I/O board button press simulation (active high)
|
|
// b[1]: user button
|
|
// b[0]: osd button
|
|
output [1:0] BUTTONS,
|
|
|
|
input CLK_AUDIO, // 24.576 MHz
|
|
output [15:0] AUDIO_L,
|
|
output [15:0] AUDIO_R,
|
|
output AUDIO_S, // 1 - signed audio samples, 0 - unsigned
|
|
output [1:0] AUDIO_MIX, // 0 - no mix, 1 - 25%, 2 - 50%, 3 - 100% (mono)
|
|
|
|
//ADC
|
|
inout [3:0] ADC_BUS,
|
|
|
|
//SD-SPI
|
|
output SD_SCK,
|
|
output SD_MOSI,
|
|
input SD_MISO,
|
|
output SD_CS,
|
|
input SD_CD,
|
|
|
|
//High latency DDR3 RAM interface
|
|
//Use for non-critical time purposes
|
|
output DDRAM_CLK,
|
|
input DDRAM_BUSY,
|
|
output [7:0] DDRAM_BURSTCNT,
|
|
output [28:0] DDRAM_ADDR,
|
|
input [63:0] DDRAM_DOUT,
|
|
input DDRAM_DOUT_READY,
|
|
output DDRAM_RD,
|
|
output [63:0] DDRAM_DIN,
|
|
output [7:0] DDRAM_BE,
|
|
output DDRAM_WE,
|
|
|
|
//SDRAM interface with lower latency
|
|
output SDRAM_CLK,
|
|
output SDRAM_CKE,
|
|
output [12:0] SDRAM_A,
|
|
output [1:0] SDRAM_BA,
|
|
inout [15:0] SDRAM_DQ,
|
|
output SDRAM_DQML,
|
|
output SDRAM_DQMH,
|
|
output SDRAM_nCS,
|
|
output SDRAM_nCAS,
|
|
output SDRAM_nRAS,
|
|
output SDRAM_nWE,
|
|
|
|
`ifdef MISTER_DUAL_SDRAM
|
|
//Secondary SDRAM
|
|
//Set all output SDRAM_* signals to Z ASAP if SDRAM2_EN is 0
|
|
input SDRAM2_EN,
|
|
output SDRAM2_CLK,
|
|
output [12:0] SDRAM2_A,
|
|
output [1:0] SDRAM2_BA,
|
|
inout [15:0] SDRAM2_DQ,
|
|
output SDRAM2_nCS,
|
|
output SDRAM2_nCAS,
|
|
output SDRAM2_nRAS,
|
|
output SDRAM2_nWE,
|
|
`endif
|
|
|
|
input UART_CTS,
|
|
output UART_RTS,
|
|
input UART_RXD,
|
|
output UART_TXD,
|
|
output UART_DTR,
|
|
input UART_DSR,
|
|
|
|
// Open-drain User port.
|
|
// 0 - D+/RX
|
|
// 1 - D-/TX
|
|
// 2..6 - USR2..USR6
|
|
// Set USER_OUT to 1 to read from USER_IN.
|
|
input [6:0] USER_IN,
|
|
output [6:0] USER_OUT,
|
|
|
|
input OSD_STATUS
|
|
);
|
|
|
|
//`define SOUND_DBG
|
|
//assign CE_PIXEL=1;
|
|
|
|
//assign {UART_RTS, UART_TXD, UART_DTR} = 0;
|
|
assign {SD_SCK, SD_MOSI, SD_CS} = 'Z;
|
|
//assign USER_OUT = '1;
|
|
assign {DDRAM_CLK, DDRAM_BURSTCNT, DDRAM_ADDR, DDRAM_DIN, DDRAM_BE, DDRAM_RD, DDRAM_WE} = 0;
|
|
assign ADC_BUS = 'Z;
|
|
//assign {SDRAM_DQ, SDRAM_A, SDRAM_BA, SDRAM_CLK, SDRAM_CKE, SDRAM_DQML, SDRAM_DQMH, SDRAM_nWE, SDRAM_nCAS, SDRAM_nRAS, SDRAM_nCS} = 'Z;
|
|
assign BUTTONS = 0;
|
|
|
|
|
|
assign VGA_F1 = 0;
|
|
//assign USER_OUT = '1;
|
|
assign LED_USER = ioctl_download;
|
|
assign LED_DISK = 0;
|
|
assign LED_POWER = 0;
|
|
|
|
assign VGA_SCALER = 0;
|
|
assign HDMI_FREEZE = 0;
|
|
|
|
wire [1:0] ar = status[9:8];
|
|
|
|
assign VIDEO_ARX = (!ar) ? 12'd4 : (ar - 1'd1);
|
|
assign VIDEO_ARY = (!ar) ? 12'd3 : 12'd0;
|
|
|
|
|
|
|
|
`include "build_id.v"
|
|
`include "build_id_num.v"
|
|
|
|
localparam CONF_STR = {
|
|
"COCO3;UART19200:9600:4800:2400:1200:300;",
|
|
"-;",
|
|
"OCD,Multi-Pak,(Slot 2) CoCoSDC,(Slot3) ECB /Cart,(Slot 4) Disk;",
|
|
"H3-;",
|
|
"H3S2,DSK,Load Disk Drive 0;",
|
|
"H3S3,DSK,Load Disk Drive 1;",
|
|
"H3S4,DSK,Load Disk Drive 2;",
|
|
"H3S5,DSK,Load Disk Drive 3;",
|
|
"H2-;",
|
|
"H2F1,CCC,Load Cartridge;",
|
|
"H1-;",
|
|
"H1S0,DSKVHD,Load SDC Drive 0;",
|
|
"H1S1,DSKVHD,Load SDC Drive 1;",
|
|
"H1-;",
|
|
"H1S2,DSK,Load OS9 Floppy /d0;",
|
|
"H1S3,DSK,Load OS9 Floppy /d1;",
|
|
"H1S4,DSK,Load OS9 Floppy /d3;",
|
|
"H1S5,DSK,Load OS9 Floppy /d4;",
|
|
"-;",
|
|
|
|
"F2,CAS,Load Cassette;",
|
|
"TF,Stop & Rewind;",
|
|
"OH,Monitor Tape Sound,No,Yes;",
|
|
"-;",
|
|
"S6,CAS,Save Cassette;",
|
|
"OE,Cass Rwd=0 / Rec=1,0,1;",
|
|
"-;",
|
|
|
|
"P1,Video Settings;",
|
|
"P1-;",
|
|
"P1-, -= Video Settings =-;",
|
|
"P1-;",
|
|
"P1O89,Aspect ratio,Original,Full Screen,Wide,[ARC1];",
|
|
"P1O35,Scandoubler Fx,None,HQ2x,CRT 25%,CRT 50%,CRT 75%;",
|
|
"P1-;",
|
|
"P1OL,CoCo3 LC,Yes,No-(SG6=Yes);",
|
|
"P1-;",
|
|
"P1o56,Artifact Type,MESS,Simple,NONE;",
|
|
"P1OI,Artifact Color Set,0,1;",
|
|
"-;",
|
|
"P2,Debug Menu;",
|
|
"P2-;",
|
|
"P2-, -= Debug Menu =-;",
|
|
"P2-;",
|
|
"P2F3,BIN,Load COCO Font;",
|
|
"P2OG,Cart Interrupt Disabled,OFF,ON;",
|
|
"-;",
|
|
"ON,D-Pad Joystick emu,No,Yes;",
|
|
"O6,Swap Joysticks,Off,On;",
|
|
"OS,Use Mouse for Rt Joystk,Off,On;",
|
|
"RA,Easter Egg;",
|
|
"-;",
|
|
"OO,Force Turbo,No,Yes;",
|
|
"o02,Turbo Speed,CoCo Ctrl, 0.89 Mhz,1.78 Mhz,2.86 Mhz, 3.58 Mhz,7.16 Mhz,9.54 Mhz;",
|
|
"OPR,Memory Size,512K,1M,2M,16M;",
|
|
"o89,Auto Run,No,DOS,AUTO.BAS;",
|
|
"-;",
|
|
"RM,Cold Boot;",
|
|
"R0,Reset;",
|
|
"J,Button1,Button2;",
|
|
"jn,A,B;",
|
|
"v,51;",
|
|
"V,v",{`BUILD_DATE,"-",`BUILD_NUMBER}
|
|
};
|
|
|
|
// Status bits Directory
|
|
|
|
// Status Bit Map:
|
|
// Upper Lower
|
|
// 0 1 2 3 4 5 6
|
|
// 01234567890123456789012345678901 23456789012345678901234567890123
|
|
// 0123456789ABCDEFGHIJKLMNOPQRSTUV 0123456789ABCDEFGHIJKLMNOPQRSTUV
|
|
//
|
|
|
|
// R OOOO OOR OOOTOOOOOOROOOOOO ooo oo oo
|
|
//F FF
|
|
//S SSSSSSS
|
|
|
|
//////////////////// CLOCKS ///////////////////
|
|
|
|
wire clk_sys;
|
|
|
|
assign clk_sys=CLK_57;
|
|
|
|
wire pll_locked, pll2_locked;
|
|
wire CLK_114, CLK_57, CLK_28, CLK_14;
|
|
|
|
assign VGA_DISABLE = 1'b0;
|
|
|
|
pll pll
|
|
(
|
|
.refclk(CLK_50M),
|
|
.rst(0),
|
|
.outclk_0(CLK_114),
|
|
.outclk_1(CLK_57),
|
|
.outclk_2(CLK_28),
|
|
.outclk_3(CLK_14),
|
|
.locked(pll2_locked)
|
|
);
|
|
|
|
///////////////////////////////////////////////////
|
|
|
|
wire [63:0] status;
|
|
wire [63:0] status_in = 63'd0;
|
|
wire status_set;
|
|
|
|
wire [1:0] buttons;
|
|
wire forced_scandoubler;
|
|
wire direct_video;
|
|
|
|
wire ioctl_download;
|
|
wire [7:0] ioctl_index;
|
|
wire ioctl_wr;
|
|
wire [24:0] ioctl_addr;
|
|
wire [7:0] ioctl_data;
|
|
|
|
wire [10:0] ps2_key;
|
|
|
|
wire [31:0] joy1, joy2;
|
|
|
|
wire [15:0] joya1, joya2;
|
|
|
|
wire [21:0] gamma_bus;
|
|
|
|
assign CLK_VIDEO = clk_sys;
|
|
|
|
wire [64:0] RTC;
|
|
wire [15:0] sdram_sz;
|
|
|
|
// SD - 7 drives [4 fdc, 2 sdc and 1 cass_wr] 512 size blocks [the wd1793 translates to a 256 byte sector size]
|
|
hps_io #(.CONF_STR(CONF_STR),.PS2DIV(2400), .VDNUM(7), .BLKSZ(2)) hps_io
|
|
(
|
|
.clk_sys(clk_sys),
|
|
.HPS_BUS(HPS_BUS),
|
|
|
|
|
|
.buttons(buttons),
|
|
.status(status),
|
|
.status_in(status_in),
|
|
.status_set(status_set),
|
|
|
|
.status_menumask({ ~(mpi == 2'b11), ~(mpi == 2'b10),~(mpi == 2'b01), 1'b1}),
|
|
.forced_scandoubler(forced_scandoubler),
|
|
.RTC(RTC),
|
|
.gamma_bus(gamma_bus),
|
|
.direct_video(direct_video),
|
|
|
|
.ioctl_download(ioctl_download),
|
|
.ioctl_wr(ioctl_wr),
|
|
.ioctl_addr(ioctl_addr),
|
|
.ioctl_dout(ioctl_data),
|
|
.ioctl_index(ioctl_index),
|
|
|
|
.sdram_sz(sdram_sz),
|
|
|
|
// SD block level interface
|
|
|
|
.img_mounted(img_mounted), // signaling that new image has been mounted
|
|
.img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted
|
|
.img_size(img_size), // size of image in bytes.
|
|
|
|
.sd_lba(sd_lba),
|
|
.sd_blk_cnt(sd_blk_cnt), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
|
|
|
|
.sd_rd(sd_rd),
|
|
.sd_wr(sd_wr),
|
|
.sd_ack(sd_ack),
|
|
|
|
// SD byte level access. Signals for 2-PORT altsyncram.
|
|
.sd_buff_addr(sd_buff_addr),
|
|
.sd_buff_dout(sd_buff_dout),
|
|
.sd_buff_din(sd_buff_din),
|
|
.sd_buff_wr(sd_buff_wr),
|
|
|
|
.joystick_0(joy1),
|
|
.joystick_1(joy2),
|
|
|
|
.joystick_l_analog_0(joya1),
|
|
.joystick_l_analog_1(joya2),
|
|
|
|
.ps2_key(ps2_key),
|
|
|
|
|
|
.ps2_kbd_clk_out ( ps2_kbd_clk ),
|
|
.ps2_kbd_data_out ( ps2_kbd_data ),
|
|
.ps2_mouse(ps2_mouse)
|
|
);
|
|
|
|
// SD block level interface
|
|
wire [6:0] img_mounted;
|
|
wire img_readonly;
|
|
wire [63:0] img_size;
|
|
|
|
wire [31:0] sd_lba[7];
|
|
wire [5:0] sd_blk_cnt[7];
|
|
|
|
wire [6:0] sd_rd;
|
|
wire [6:0] sd_wr;
|
|
wire [6:0] sd_ack;
|
|
|
|
// SD byte level access. Signals for 2-PORT altsyncram.
|
|
wire [8:0] sd_buff_addr;
|
|
wire [7:0] sd_buff_dout;
|
|
wire [7:0] sd_buff_din[7];
|
|
wire sd_buff_wr;
|
|
|
|
|
|
wire [9:0] center_joystick_y1 = 8'd128 + joya1[15:8];
|
|
wire [9:0] center_joystick_x1 = 8'd128 + joya1[7:0];
|
|
wire [9:0] center_joystick_y2 = 8'd128 + joya2[15:8];
|
|
wire [9:0] center_joystick_x2 = 8'd128 + joya2[7:0];
|
|
wire vclk;
|
|
|
|
wire [31:0] coco_joy1 = status[6] ? joy2 : joy1;
|
|
wire [31:0] coco_joy2 = status[6] ? joy1 : joy2;
|
|
|
|
wire [15:0] coco_ajoy1 = status[6] ? {center_joystick_x2[7:0],center_joystick_y2[7:0]} : {center_joystick_x1[7:0],center_joystick_y1[7:0]};
|
|
wire [15:0] coco_ajoy2 = status[6] ? {center_joystick_x1[7:0],center_joystick_y1[7:0]} : {center_joystick_x2[7:0],center_joystick_y2[7:0]};
|
|
|
|
|
|
|
|
wire ps2_kbd_clk;
|
|
wire ps2_kbd_data;
|
|
|
|
wire [24:0] ps2_mouse;
|
|
|
|
wire hblank, vblank;
|
|
wire hs, vs;
|
|
|
|
wire pix_clk;
|
|
|
|
|
|
wire [2:0] scale = status[5:3];
|
|
wire [2:0] sl = scale ? scale - 1'd1 : 3'd0;
|
|
wire scandoubler = (scale || forced_scandoubler);
|
|
assign VGA_SL = sl[1:0];
|
|
|
|
wire freeze_sync;
|
|
|
|
|
|
video_mixer #(.GAMMA(1)) video_mixer
|
|
(
|
|
.*,
|
|
|
|
.CLK_VIDEO(clk_sys),
|
|
.ce_pix(pix_clk),
|
|
|
|
.hq2x(scale==1),
|
|
|
|
|
|
.R(r),
|
|
.G(g),
|
|
.B(b),
|
|
|
|
// Positive pulses.
|
|
.HSync(hs),
|
|
.VSync(vs),
|
|
.HBlank(hblank),
|
|
.VBlank(vblank)
|
|
);
|
|
//
|
|
//
|
|
|
|
wire Programmed_RESET_N;
|
|
wire Programmed_EE;
|
|
|
|
EE_Cold_Bt COCO3_EE_Cold_Bt (
|
|
.CLK(CLK_14),
|
|
.RESET(1'b0),
|
|
|
|
// .Display_EE(1'b0), // from MISTer subsystem
|
|
.Display_EE(easter_egg), // from MISTer subsystem
|
|
.Cold_Boot(AMW_ACK), // from AMW system
|
|
|
|
.RESET_to_COCO_N(Programmed_RESET_N), // RESET_N to the coco3 [logically AND'ed to top reset]
|
|
.EE_to_COCO(Programmed_EE) // Easter Egg to the coco3
|
|
);
|
|
|
|
|
|
wire [15:0] audio_left;
|
|
assign AUDIO_L = { audio_left[15:14], audio_left[13] ^ (status[17] ? casdout : 1'b0),audio_left[12:0]};
|
|
//assign AUDIO_R = AUDIO_L;
|
|
assign AUDIO_S = 0;
|
|
assign AUDIO_MIX = 0;
|
|
|
|
wire [7:0] r;
|
|
wire [7:0] g;
|
|
wire [7:0] b;
|
|
|
|
wire easter_egg = status[10];
|
|
wire [31:0] probe;
|
|
|
|
assign USER_OUT[6:0] = probe[6:0];
|
|
|
|
wire [71:0] Config_Data;
|
|
|
|
assign Config_Data = {`BUILD_DATE, `BUILD_NUMBER};
|
|
|
|
coco3fpga coco3 (
|
|
// CLOCKS
|
|
|
|
.CLK_50M(CLK_50M),
|
|
.CLK_114(CLK_114),
|
|
.CLK_57(CLK_57),
|
|
.CLK_28(CLK_28),
|
|
.CLK_14(CLK_14),
|
|
|
|
// Reset
|
|
.COCO_RESET_N((~reset & Programmed_RESET_N)),
|
|
|
|
.RED(r),
|
|
.GREEN(g),
|
|
.BLUE(b),
|
|
|
|
.EE_N(Programmed_EE),
|
|
.PHASE(PHASE),
|
|
|
|
.H_SYNC(hs),
|
|
.V_SYNC(vs),
|
|
.HBLANK(hblank),
|
|
.VBLANK(vblank),
|
|
.PIX_CLK(pix_clk),
|
|
// PS/2
|
|
.ps2_clk(ps2_kbd_clk),
|
|
.ps2_data(ps2_kbd_data),
|
|
|
|
.ps2_mouse(ps2_mouse),
|
|
|
|
.joy_use_dpad(digitalJoy),
|
|
|
|
.joy1(coco_joy1),
|
|
.joy2(coco_joy2),
|
|
|
|
.joya1(coco_ajoy1),
|
|
.joya2(coco_ajoy2),
|
|
|
|
.SWAP_M_J(SWAP_M_J),
|
|
|
|
// R1, L2, R2, L1
|
|
.P_SWITCH(~{coco_joy2[4],coco_joy1[5],coco_joy2[5],coco_joy1[4]}),
|
|
.SWITCH(switch),
|
|
// .SOUND_OUT(cocosound),
|
|
.SOUND_LEFT(audio_left),
|
|
.SOUND_RIGHT(AUDIO_R),
|
|
|
|
// Removed offset addition
|
|
.ioctl_addr(ioctl_addr),
|
|
.ioctl_data(ioctl_data),
|
|
.ioctl_download(ioctl_download),
|
|
.ioctl_index(ioctl_index),
|
|
.ioctl_wr(ioctl_wr),
|
|
|
|
// SDRAM Info
|
|
.sdram_sz(sdram_sz),
|
|
|
|
// SD block level interface
|
|
|
|
.img_mounted(img_mounted), // signaling that new image has been mounted
|
|
.img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted
|
|
.img_size(img_size), // size of image in bytes.
|
|
|
|
.sd_lba(sd_lba),
|
|
.sd_blk_cnt(sd_blk_cnt), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
|
|
|
|
.sd_rd(sd_rd),
|
|
.sd_wr(sd_wr),
|
|
.sd_ack(sd_ack),
|
|
|
|
// SD byte level access. Signals for 2-PORT altsyncram.
|
|
.sd_buff_addr(sd_buff_addr),
|
|
.sd_buff_dout(sd_buff_dout),
|
|
.sd_buff_din(sd_buff_din),
|
|
.sd_buff_wr(sd_buff_wr),
|
|
|
|
.PROBE(probe[31:0]),
|
|
.clk_Q_out(clk_Q_out),
|
|
.casdout( casdout),
|
|
.cas_relay(cas_relay),
|
|
|
|
// SDRAM
|
|
|
|
.sdram_cpu_addr(sdram_cpu_addr),
|
|
.sdram_dout(sdram_dout),
|
|
.sdram_cpu_din(sdram_cpu_din),
|
|
.sdram_cpu_req(sdram_cpu_req),
|
|
.sdram_cpu_rnw(sdram_cpu_rnw),
|
|
.sdram_cpu_ack(sdram_cpu_ack),
|
|
.sdram_cpu_ready(sdram_cpu_ready),
|
|
|
|
.sdram_vid_addr(sdram_vid_addr[24:0]),
|
|
.sdram_vid_req(sdram_vid_req),
|
|
.sdram_vid_ack(sdram_vid_ack),
|
|
.sdram_vid_ready(sdram_vid_ready),
|
|
|
|
.sdram_busy(sdram_busy),
|
|
|
|
.turbo_speed(turbo_speed),
|
|
.assigned_turbo_speed(assigned_turbo_speed),
|
|
|
|
.RTC(RTC),
|
|
|
|
.AMW_Trigger(coldboot | mpi_reset | mem_reset),
|
|
// .AMW_Trigger(coldboot),
|
|
.AMW_ACK(AMW_ACK),
|
|
|
|
.F_Turbo(F_Turbo),
|
|
|
|
.Mem_Size(Mem_Size),
|
|
|
|
.AUTO_MODE(Auto_Mode),
|
|
|
|
.Config_Data(Config_Data),
|
|
|
|
.UART_TXD(UART_TXD),
|
|
.UART_RXD(UART_RXD),
|
|
.UART_RTS(UART_RTS),
|
|
.UART_CTS(UART_CTS),
|
|
.UART_DTR(UART_DTR),
|
|
.UART_DSR(UART_DSR)
|
|
);
|
|
|
|
assign status_set = 1'b0;
|
|
|
|
//wire [5:0] cocosound;
|
|
|
|
wire [2:0] turbo_speed = status[34:32];
|
|
wire [2:0] assigned_turbo_speed;
|
|
wire [1:0] art = status[38:37];
|
|
wire [1:0] Auto_Mode = status[41:40];
|
|
|
|
wire AMW_ACK;
|
|
|
|
//wire cpu_speed = status[11];
|
|
|
|
wire [1:0] mpi = status[13:12] + 1'b1;
|
|
//wire video=status[14];
|
|
wire CASS_REW_RECORD=status[14];
|
|
wire cartint=status[16];
|
|
wire sg4v6 = status[21];
|
|
|
|
wire PHASE = status[18];
|
|
|
|
wire coldboot = status[22];
|
|
|
|
wire F_Turbo = status[24];
|
|
wire [2:0] Mem_Size = status[27:25];
|
|
wire SWAP_M_J = status[28];
|
|
|
|
wire digitalJoy = status[23];
|
|
reg [2:0] mpi_d = 2'b00;
|
|
reg first_mpi_chg = 1'b0;
|
|
reg mpi_reset = 1'b0;
|
|
|
|
always @ (negedge CLK_14)
|
|
begin
|
|
mpi_d <= mpi;
|
|
mpi_reset <= 1'b0;
|
|
|
|
if (~(mpi == mpi_d))
|
|
if (~first_mpi_chg)
|
|
first_mpi_chg <= 1'b1;
|
|
else
|
|
mpi_reset <= 1'b1;
|
|
|
|
end
|
|
|
|
reg [2:0] Mem_Size_d = 3'b000;
|
|
reg first_mem_chg = 1'b0;
|
|
reg mem_reset = 1'b0;
|
|
|
|
always @ (negedge CLK_14)
|
|
begin
|
|
Mem_Size_d <= Mem_Size;
|
|
mem_reset <= 1'b0;
|
|
|
|
if (~(Mem_Size == Mem_Size_d))
|
|
if (~first_mem_chg)
|
|
first_mem_chg <= 1'b1;
|
|
else
|
|
mem_reset <= 1'b1;
|
|
|
|
end
|
|
|
|
// Set bit 9 to swap serial ports...
|
|
wire [9:0] switch = { 2'b10,art,sg4v6,cartint,CASS_REW_RECORD,mpi,1'b0};
|
|
|
|
|
|
wire reset = RESET | status[0] | buttons[1];
|
|
//wire reset = buttons[1];
|
|
|
|
wire clk_Q_out;
|
|
|
|
wire [24:0] sdram_cpu_addr;
|
|
//wire [31:0] sdram_ldout;
|
|
wire [15:0] sdram_dout;
|
|
wire [7:0] sdram_cpu_din;
|
|
wire sdram_cpu_req, sdram_cpu_rnw;
|
|
wire sdram_cpu_ack, sdram_vid_ack;
|
|
wire sdram_cpu_ready;
|
|
|
|
wire [24:0] sdram_vid_addr;
|
|
wire sdram_vid_req;
|
|
wire sdram_vid_ready;
|
|
wire sdram_busy;
|
|
|
|
|
|
sdram_32r8w coco3_sdram
|
|
(
|
|
.*,
|
|
.init(reset),
|
|
.clk(CLK_114),
|
|
.sdram_cpu_addr(sdram_cpu_addr[24:0]),
|
|
// .sdram_ldout(sdram_ldout),
|
|
.sdram_dout(sdram_dout),
|
|
.sdram_cpu_din(sdram_cpu_din),
|
|
.sdram_cpu_req(sdram_cpu_req),
|
|
.sdram_cpu_rnw(sdram_cpu_rnw),
|
|
.sdram_cpu_ack(sdram_cpu_ack),
|
|
.sdram_cpu_ready(sdram_cpu_ready),
|
|
|
|
.sdram_vid_addr(sdram_vid_addr[24:0]),
|
|
.sdram_vid_req(sdram_vid_req),
|
|
.sdram_vid_ack(sdram_vid_ack),
|
|
.sdram_vid_ready(sdram_vid_ready),
|
|
|
|
.sdram_busy(sdram_busy)
|
|
);
|
|
|
|
|
|
wire casdout;
|
|
wire cas_relay;
|
|
wire load_tape = ioctl_index == 2;
|
|
|
|
wire [15:0] ram_addr;
|
|
wire [7:0] ram_data_o;
|
|
wire ram_rd;
|
|
wire ram_wr;
|
|
wire [15:0] ram_ad_buf;
|
|
|
|
always @(posedge clk_sys)
|
|
begin
|
|
ram_wr <= ~(ioctl_wr & load_tape);
|
|
if (ioctl_download)
|
|
ram_ad_buf <= ioctl_addr[15:0];
|
|
else
|
|
ram_ad_buf <= ram_addr;
|
|
end
|
|
|
|
COCO_SRAM CC3_CAS1(
|
|
.CLK(clk_sys),
|
|
.ADDR(ram_ad_buf),
|
|
.R_W(ram_wr),
|
|
.DATA_I(ioctl_data),
|
|
.DATA_O(ram_data_o)
|
|
);
|
|
|
|
|
|
cassette cassette(
|
|
.clk(clk_sys),
|
|
.Q(clk_Q_out),
|
|
|
|
.rewind(status[15]|~ram_wr),
|
|
.en(cas_relay),
|
|
|
|
.sdram_addr(ram_addr),
|
|
.sdram_data(ram_data_o),
|
|
// .sdram_rd(ram_rd), // Not connected for sram
|
|
|
|
.data(casdout)
|
|
);
|
|
endmodule
|