verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule, screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette, and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA trace) with a minimal DriveWire server and a script to run the real FujiNet daemon against the sim. See verilator/README.md. - The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809). - sdram2.sv is simulated with its own controller logic and an SDR chip model. - run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on the text screen and byte-for-byte against test-ref/ screenshots. rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of inside generate blocks. They are assigned outside those blocks; Quartus accepted it, Verilator rejected spt_addr and silently split buff_wr into a separate net. No change on the FPGA (FM-7 made the same fix). Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
28 lines
957 B
Verilog
28 lines
957 B
Verilog
//============================================================================
|
|
// Simulation stand-in for rtl/VDAC.v (an altsyncram megafunction).
|
|
//
|
|
// Same ports and the configuration the megafunction declares: DUAL_PORT,
|
|
// 256 x 16, write on wrclock, address AND output registered on rdclock
|
|
// (address_reg_b = outdata_reg_b = CLOCK1), so q lags rdaddress by two
|
|
// rdclock edges. Preloaded from rtl/VDAC.mif via verilator/rtl/vdac.mem.
|
|
//============================================================================
|
|
module VDAC
|
|
(
|
|
input [15:0] data,
|
|
input [7:0] rdaddress,
|
|
input rdclock,
|
|
input [7:0] wraddress,
|
|
input wrclock,
|
|
input wren,
|
|
output reg [15:0] q
|
|
);
|
|
reg [15:0] mem [0:255];
|
|
reg [7:0] rd_a;
|
|
initial $readmemh("rtl/vdac.mem", mem);
|
|
always @(posedge wrclock) if (wren) mem[wraddress] <= data;
|
|
always @(posedge rdclock) begin
|
|
rd_a <= rdaddress;
|
|
q <= mem[rd_a];
|
|
end
|
|
endmodule
|