Files
CoCo3_Plus_MiSTer/verilator/Makefile
Alan SterembergandClaude Opus 5.5 9e70212e87 Sim: follow the 20260927 release
- sim.v: the coco3fpga ports changed (RED_O/GREEN_O/BLUE_O, PROBE_O/PROBE_I,
  Display_Debug) and so did the switch word (rs_swap, UART_INPUT, and the cart
  interrupt option on SWITCH[9]); mirror CoCo3.sv. SNAC inputs idle high.
- rtl/ovo.v: Verilog translation of the new rtl/OVO.vhd overlay; the
  Makefile drops the removed Mister_Video_GIMEX.v.
- PIX_CLK is now a clk_sys enable, high 2 of every 4 cycles, fed to the
  mixer's ce_pix. Capture video as video_mixer.sv does: on a clk_sys rising
  edge, one pixel per rising edge of the enable.
- New reference screenshots: the release's video timing moves the picture
  about 2 pixels; text checks unchanged.
- Commit tests/dw_boot.sh, which the dw_boot* ignore pattern was hiding.

Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
2026-10-02 07:29:18 -04:00

158 lines
5.1 KiB
Makefile

#============================================================================
# CoCo3 Verilator simulation
#
# Same layout as the FM-7 and Apple-IIgs sims: sim.v stands in for CoCo3.sv,
# sim/ is the shared ImGui/SDL framework, and one binary runs either windowed
# or with --headless.
#
# make build ./obj_dir/Vemu
# make run build and launch the windowed sim
# make headless build and boot to BASIC headless, screenshot at the end
# make test build and run the headless smoke test (run_tests.sh)
# make lint elaborate the design only
# make mem regenerate rtl/*.mem from the VHDL/MIF sources
# make clean
#
# No ghdl step. The build uses the Verilog cycle-accurate 6809 (mc6809glb.v,
# selected by CoCo3_CYC_ACC_6809 in rtl/config.sv), and the VHDL entities it
# does instantiate -- ROMs, RAMs, the font -- are converted by hand in rtl/:
#
# rtl/rom/coco_rom_32K.vhd, coco_rom_8K.vhd, coco_rom_cart.vhd,
# coco_rom_16.vhd, coco3_char_rom.vhd -> rtl/coco_rom.v
# rtl/sram/coco_ram.vhd, coco_vid_ram_buf.vhd -> rtl/coco_sram.v
#
# Quartus-only pieces are replaced as well: rtl/VDAC.v (altsyncram) by
# rtl/VDAC.v here, rtl/sdram/sdram2.sv by rtl/sdram2.sv here (same controller,
# chip model instead of pins), and the PLL by clocks driven from sim_main.
#============================================================================
V = verilator
RTL = ../rtl
TOP = --top-module emu
# Verilator 5 demands --no-timing for the cosmetic `#` delays; 4.x rejects the
# flag. Same probe as the FM-7 Makefile.
VERILATOR_MAJOR := $(shell verilator --version 2>/dev/null | sed -n 's/^Verilator \([0-9][0-9]*\).*/\1/p')
NO_TIMING := $(if $(filter 4,$(VERILATOR_MAJOR)),,--no-timing)
# -Wno-PROCASSWIRE: coco3fpga.sv and fdc.sv declare a number of registers as
# `wire` and assign them in always blocks (Build_Info, VMA, PIX_CLK_D, the $FF40
# latch, ...). Quartus accepts that and so does Verilator once the check is
# waived; the RTL is left as it is.
V_DEFINE = +define+SIMULATION=1 -Wno-PROCASSWIRE \
--timescale-override 1ps/1ps -Wno-TIMESCALEMOD -Wno-fatal \
$(NO_TIMING) --converge-limit 6000 \
-I$(RTL)
# VCD tracing: `make clean && make TRACE=1`, then run with --vcd <file> and a
# --trace-from/--trace-until window (a 114 MHz design dumps ~1 GB a frame).
ifeq ($(TRACE),1)
V_DEFINE += --trace
CXX_DEFINE += -DVM_TRACE_VCD=1
else
CXX_DEFINE += -DVM_TRACE_VCD=0
endif
UNAME_S := $(shell uname -s)
ifeq ($(UNAME_S), Darwin)
LIBS += -framework OpenGL -framework Cocoa -framework IOKit -framework CoreVideo `sdl2-config --libs`
LIBS += -L/usr/local/lib -L/opt/local/lib -L/opt/homebrew/lib
CXXFLAGS += `sdl2-config --cflags`
CXXFLAGS += `sdl2-config --cflags | sed 's|include/SDL2|include/|'`
CXXFLAGS += -I/usr/local/include -I/opt/local/include -I/opt/homebrew/include
endif
ifeq ($(UNAME_S), Linux)
LIBS += -lGL -ldl `sdl2-config --libs`
CXXFLAGS += `sdl2-config --cflags`
endif
ifeq ($(findstring MINGW,$(UNAME_S)),MINGW)
LIBS += -lgdi32 -lopengl32 -limm32 `pkg-config --static --libs sdl2`
CXXFLAGS += `pkg-config --cflags sdl2`
endif
CC_OPT = -O2
V_OPT = -O3 --x-assign fast --x-initial fast --noassert
CXXFLAGS += $(CC_OPT) $(CXX_DEFINE) -I../sim/imgui -I../sim -I.. -g
LDFLAGS = $(LIBS)
EXE = ./obj_dir/Vemu
V_SRC = \
sim.vlt \
sim.v \
rtl/sdram2.sv \
rtl/coco_rom.v \
rtl/coco_sram.v \
rtl/VDAC.v \
rtl/ovo.v \
../sys/hps_io.sv \
$(RTL)/coco3fpga.sv \
$(RTL)/EE_Cold_Bt.v \
$(RTL)/cassette.v \
$(RTL)/square_gen.v \
$(RTL)/AMW.v \
$(RTL)/rtc.sv \
$(RTL)/fdc.sv \
$(RTL)/wd1793.sv \
$(RTL)/sdc.sv \
$(RTL)/sdc_top.sv \
$(RTL)/Auto_Run.sv \
$(RTL)/ps2_mouse.v \
$(RTL)/coco_mem_fetch.sv \
$(RTL)/Cassette_Write.sv \
$(RTL)/cocokey.v \
$(RTL)/PS2_Key/ps2_keyboard.v \
$(RTL)/UART_6551/uart_6551.v \
$(RTL)/UART_6551/6551tx.v \
$(RTL)/UART_6551/6551rx.v \
$(RTL)/mc6809glb/mc6809glb.v \
$(RTL)/Mister_Video.v
C_SRC = \
sim_main.cpp dis6809.cpp serial.cpp \
sim/sim_bus.cpp sim/sim_clock.cpp sim/sim_console.cpp sim/sim_video.cpp \
sim/sim_blkdevice.cpp sim/sim_input.cpp sim/sim_audio.cpp \
sim/imgui/imgui_impl_sdl.cpp sim/imgui/imgui_impl_opengl2.cpp \
sim/imgui/imgui_draw.cpp sim/imgui/imgui_widgets.cpp sim/imgui/imgui_tables.cpp \
sim/imgui/imgui.cpp sim/imgui/ImGuiFileDialog.cpp \
sim/imgui/implot.cpp sim/imgui/implot_items.cpp
VOUT = obj_dir/Vemu.cpp
all: $(EXE)
$(VOUT): $(V_SRC) Makefile
$V -cc $(V_OPT) -LDFLAGS "$(LDFLAGS)" -exe --Mdir ./obj_dir \
$(V_DEFINE) $(TOP) -CFLAGS "$(CXXFLAGS)" $(V_SRC) $(C_SRC)
$(EXE): $(VOUT) $(C_SRC) sim/*.h dis6809.h serial.h
(cd obj_dir; $(MAKE) -f Vemu.mk OBJCACHE= OPT_FAST="-O2" OPT_SLOW="-O0" OPT_GLOBAL="-O2")
lint:
$V --lint-only $(V_DEFINE) -Wno-WIDTH $(TOP) $(V_SRC)
mem:
python3 gen_mem.py
run: all
$(EXE)
headless: all
$(EXE) --headless --stop-at-frame 150 --screenshot 150
test: all
./run_tests.sh
clean:
rm -rf obj_dir
.PHONY: all lint mem run headless test clean
# Disassembler self-check. Standalone -- no Verilator, no core.
distest: dis6809_test.cpp dis6809.cpp dis6809.h
mkdir -p obj_dir && c++ -O1 -o obj_dir/distest dis6809_test.cpp dis6809.cpp -I. && ./obj_dir/distest
.PHONY: distest