Files
CoCo3_Plus_MiSTer/rtl/EE_Cold_Bt.v
shodge12 1da70a7929 Core changes and CSAVE support.
1.	Added support for cassette save.  To use: A) You have to have a file [anyname.cas]
	which is larger than needed.  B) Select the file through the UI Menu 'Save
	Cassette'.  C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"'
	E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write.  The file can
	now be loaded or copied.  Note a dummy file of a specific size can be created in
	the MiSTer SSH shell in the /media/fat/games/coco3 with the command:
	'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length]
2.	Fixed serial interrupt [6551] to not be functional on slot 3 [carts].
3.	Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used
	for logic analyzer debug.  This will only occur when `define	Config_Debug is
	enabled in config.v.
4.	Fixed MUGS of powerup issue occurring on some MiSTer units.
5.	Fixed incorrect application of GIME_IRQ on legacy interrupts.  Fixed race condition
	on reading IRQ status vs clearing the interrupt.
6.	Improved Castle of Tharoggad.  App now loads but locks as the graphics animate.  This
	change improved mmu usage through to CARTS.
7.	Builds now keep track of multiple builds in the same date.  It shows as V240512-001 in
	the menus.  Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is
	supplied in the archive to show how it works.
8.	Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font -
	IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format.
	Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display
	a clock.
9.	Large improvement in the Timer function.  Code closer emulates COCO3 Timer. Fixes
	Sliphead cart.
10.	In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for
	the FDC.  This saved space but introduced a bug when using multiple drives at the same
	time - like a copy command.  This change was removed and the copy command works again.

To Do...
1.	Add Speech / Music cart
2.	Fix Castle of Tharoggad
2024-05-14 23:00:16 -04:00

224 lines
5.8 KiB
Verilog

////////////////////////////////////////////////////////////////////////////////
// Project Name: CoCo3FPGA Version 4.0
// File Name: EE_Cold_Bt.v
//
// CoCo3 in an FPGA
//
////////////////////////////////////////////////////////////////////////////////
//
////////////////////////////////////////////////////////////////////////////////
//
// Color Computer 3 compatible system on a chip
//
//
// Copyright (c) 2008 Gary Becker ([email protected])
//
// All rights reserved
//
// Redistribution and use in source and synthezised forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// Redistributions in synthesized form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// Neither the name of the author nor the names of other contributors may
// be used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Please report bugs to the author, but before you do so, please
// make sure that this is not a derivative work and that
// you have the latest version of this file.
//
//
////////////////////////////////////////////////////////////////////////////////
// Stan Hodge
//
// EE_Cold_Bt by Stan Hodge 11/30/21
////////////////////////////////////////////////////////////////////////////////
module EE_Cold_Bt(
input CLK,
input RESET,
input Display_EE, // from MISTer subsystem
input Cold_Boot, // from MISTer subsystem
output RESET_to_COCO_N, // RESET_N to the coco3 [logically AND'ed to top reset]
output EE_to_COCO // Easter Egg to the coco3
);
////////////////////////////////////////////////////////////
reg Display_EE_D = 1'b0;
reg Cold_Boot_D = 1'b0;
wire Start_Display_EE, Start_Cold_Boot;
wire [3:0] inst;
reg EE = 1'b1;
reg N_RESET = 1'b1;
assign EE_to_COCO = EE;
assign RESET_to_COCO_N = N_RESET;
reg [47:0] prog = 48'h000000000000;
assign inst = prog[3:0];
reg next_instruction = 1'b0;
reg [23:0] timer = 24'h000000;
localparam SHORT_TIME = 24'h0aecdf; // .05 sec @ 14.32 Mhz
localparam LONG_TIME = 24'h418D40; // .3 sec @ 14.32 Mhz
localparam EE_PROG = {16'h0000, inst_EE_INACTIVE, inst_LONG_TIMER, inst_LONG_TIMER, inst_RESET_INACTIVE, inst_LONG_TIMER, inst_RESET_ACTIVE,
inst_EE_ACTIVE, inst_START};
// Orignal Easter Egg Cold Boot
//localparam Cold_Boot_PROG = {1'h0, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_SHORT_TIMER, inst_EE_INACTIVE,
// inst_LONG_TIMER, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_EE_ACTIVE, inst_START};
localparam Cold_Boot_PROG = {28'h0000000,
inst_LONG_TIMER, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_START};
localparam inst_NULL = 4'd0;
localparam inst_EE_ACTIVE = 4'd1;
localparam inst_EE_INACTIVE = 4'd2;
localparam inst_RESET_ACTIVE = 4'd3;
localparam inst_RESET_INACTIVE =4'd4;
localparam inst_SHORT_TIMER = 4'd5;
localparam inst_LONG_TIMER = 4'd6;
localparam inst_START = 4'd8;
assign Start_Display_EE = ((Display_EE == 1'b1) & (Display_EE_D == 1'b0));
assign Start_Cold_Boot = ((Cold_Boot == 1'b1) & (Cold_Boot_D == 1'b0));
always @ (posedge CLK or posedge RESET)
begin
if(RESET)
begin
Display_EE_D <= 1'b0;
Cold_Boot_D <= 1'b0;
EE <= 1'b1;
N_RESET <= 1'b1;
prog <= 48'h000000000000;
next_instruction <= 1'b0;
timer <= 24'h000000;
end
else
begin
Display_EE_D <= Display_EE;
Cold_Boot_D <= Cold_Boot;
next_instruction <= 1'b0;
if (Start_Display_EE)
begin
prog <= EE_PROG;
end
if (Start_Cold_Boot)
begin
prog <= Cold_Boot_PROG;
end
if (next_instruction)
prog[43:0] <= prog[47:4];
case(inst)
inst_NULL:;
inst_START:
begin
if (!next_instruction)
begin
timer <= 24'h000000; // clear timer
next_instruction <= 1'b1;
end
end
inst_EE_ACTIVE:
begin
if (!next_instruction)
begin
EE <= 1'b0;
next_instruction <= 1'b1;
end
end
inst_EE_INACTIVE:
begin
if (!next_instruction)
begin
EE <= 1'b1;
next_instruction <= 1'b1;
end
end
inst_RESET_ACTIVE:
begin
if (!next_instruction)
begin
N_RESET <= 1'b0;
next_instruction <= 1'b1;
end
end
inst_RESET_INACTIVE:
begin
if (!next_instruction)
begin
N_RESET <= 1'b1;
next_instruction <= 1'b1;
end
end
inst_SHORT_TIMER:
begin
if (!next_instruction)
begin
timer <= timer + 1'b1;
if (timer==SHORT_TIME)
begin
next_instruction <= 1'b1;
timer <= 24'h000000; // clear timer
end
end
end
inst_LONG_TIMER:
begin
if (!next_instruction)
begin
timer <= timer + 1'b1;
if (timer==LONG_TIME)
begin
next_instruction <= 1'b1;
timer <= 24'h000000; // clear timer
end
end
end
default:;
endcase
end
end
endmodule