- sim.v: the coco3fpga ports changed (RED_O/GREEN_O/BLUE_O, PROBE_O/PROBE_I, Display_Debug) and so did the switch word (rs_swap, UART_INPUT, and the cart interrupt option on SWITCH[9]); mirror CoCo3.sv. SNAC inputs idle high. - rtl/ovo.v: Verilog translation of the new rtl/OVO.vhd overlay; the Makefile drops the removed Mister_Video_GIMEX.v. - PIX_CLK is now a clk_sys enable, high 2 of every 4 cycles, fed to the mixer's ce_pix. Capture video as video_mixer.sv does: on a clk_sys rising edge, one pixel per rising edge of the enable. - New reference screenshots: the release's video timing moves the picture about 2 pixels; text checks unchanged. - Commit tests/dw_boot.sh, which the dw_boot* ignore pattern was hiding. Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
158 lines
5.1 KiB
Makefile
158 lines
5.1 KiB
Makefile
#============================================================================
|
|
# CoCo3 Verilator simulation
|
|
#
|
|
# Same layout as the FM-7 and Apple-IIgs sims: sim.v stands in for CoCo3.sv,
|
|
# sim/ is the shared ImGui/SDL framework, and one binary runs either windowed
|
|
# or with --headless.
|
|
#
|
|
# make build ./obj_dir/Vemu
|
|
# make run build and launch the windowed sim
|
|
# make headless build and boot to BASIC headless, screenshot at the end
|
|
# make test build and run the headless smoke test (run_tests.sh)
|
|
# make lint elaborate the design only
|
|
# make mem regenerate rtl/*.mem from the VHDL/MIF sources
|
|
# make clean
|
|
#
|
|
# No ghdl step. The build uses the Verilog cycle-accurate 6809 (mc6809glb.v,
|
|
# selected by CoCo3_CYC_ACC_6809 in rtl/config.sv), and the VHDL entities it
|
|
# does instantiate -- ROMs, RAMs, the font -- are converted by hand in rtl/:
|
|
#
|
|
# rtl/rom/coco_rom_32K.vhd, coco_rom_8K.vhd, coco_rom_cart.vhd,
|
|
# coco_rom_16.vhd, coco3_char_rom.vhd -> rtl/coco_rom.v
|
|
# rtl/sram/coco_ram.vhd, coco_vid_ram_buf.vhd -> rtl/coco_sram.v
|
|
#
|
|
# Quartus-only pieces are replaced as well: rtl/VDAC.v (altsyncram) by
|
|
# rtl/VDAC.v here, rtl/sdram/sdram2.sv by rtl/sdram2.sv here (same controller,
|
|
# chip model instead of pins), and the PLL by clocks driven from sim_main.
|
|
#============================================================================
|
|
|
|
V = verilator
|
|
RTL = ../rtl
|
|
TOP = --top-module emu
|
|
|
|
# Verilator 5 demands --no-timing for the cosmetic `#` delays; 4.x rejects the
|
|
# flag. Same probe as the FM-7 Makefile.
|
|
VERILATOR_MAJOR := $(shell verilator --version 2>/dev/null | sed -n 's/^Verilator \([0-9][0-9]*\).*/\1/p')
|
|
NO_TIMING := $(if $(filter 4,$(VERILATOR_MAJOR)),,--no-timing)
|
|
|
|
# -Wno-PROCASSWIRE: coco3fpga.sv and fdc.sv declare a number of registers as
|
|
# `wire` and assign them in always blocks (Build_Info, VMA, PIX_CLK_D, the $FF40
|
|
# latch, ...). Quartus accepts that and so does Verilator once the check is
|
|
# waived; the RTL is left as it is.
|
|
V_DEFINE = +define+SIMULATION=1 -Wno-PROCASSWIRE \
|
|
--timescale-override 1ps/1ps -Wno-TIMESCALEMOD -Wno-fatal \
|
|
$(NO_TIMING) --converge-limit 6000 \
|
|
-I$(RTL)
|
|
|
|
# VCD tracing: `make clean && make TRACE=1`, then run with --vcd <file> and a
|
|
# --trace-from/--trace-until window (a 114 MHz design dumps ~1 GB a frame).
|
|
ifeq ($(TRACE),1)
|
|
V_DEFINE += --trace
|
|
CXX_DEFINE += -DVM_TRACE_VCD=1
|
|
else
|
|
CXX_DEFINE += -DVM_TRACE_VCD=0
|
|
endif
|
|
|
|
UNAME_S := $(shell uname -s)
|
|
|
|
ifeq ($(UNAME_S), Darwin)
|
|
LIBS += -framework OpenGL -framework Cocoa -framework IOKit -framework CoreVideo `sdl2-config --libs`
|
|
LIBS += -L/usr/local/lib -L/opt/local/lib -L/opt/homebrew/lib
|
|
CXXFLAGS += `sdl2-config --cflags`
|
|
CXXFLAGS += `sdl2-config --cflags | sed 's|include/SDL2|include/|'`
|
|
CXXFLAGS += -I/usr/local/include -I/opt/local/include -I/opt/homebrew/include
|
|
endif
|
|
|
|
ifeq ($(UNAME_S), Linux)
|
|
LIBS += -lGL -ldl `sdl2-config --libs`
|
|
CXXFLAGS += `sdl2-config --cflags`
|
|
endif
|
|
|
|
ifeq ($(findstring MINGW,$(UNAME_S)),MINGW)
|
|
LIBS += -lgdi32 -lopengl32 -limm32 `pkg-config --static --libs sdl2`
|
|
CXXFLAGS += `pkg-config --cflags sdl2`
|
|
endif
|
|
|
|
CC_OPT = -O2
|
|
V_OPT = -O3 --x-assign fast --x-initial fast --noassert
|
|
CXXFLAGS += $(CC_OPT) $(CXX_DEFINE) -I../sim/imgui -I../sim -I.. -g
|
|
LDFLAGS = $(LIBS)
|
|
EXE = ./obj_dir/Vemu
|
|
|
|
V_SRC = \
|
|
sim.vlt \
|
|
sim.v \
|
|
rtl/sdram2.sv \
|
|
rtl/coco_rom.v \
|
|
rtl/coco_sram.v \
|
|
rtl/VDAC.v \
|
|
rtl/ovo.v \
|
|
../sys/hps_io.sv \
|
|
$(RTL)/coco3fpga.sv \
|
|
$(RTL)/EE_Cold_Bt.v \
|
|
$(RTL)/cassette.v \
|
|
$(RTL)/square_gen.v \
|
|
$(RTL)/AMW.v \
|
|
$(RTL)/rtc.sv \
|
|
$(RTL)/fdc.sv \
|
|
$(RTL)/wd1793.sv \
|
|
$(RTL)/sdc.sv \
|
|
$(RTL)/sdc_top.sv \
|
|
$(RTL)/Auto_Run.sv \
|
|
$(RTL)/ps2_mouse.v \
|
|
$(RTL)/coco_mem_fetch.sv \
|
|
$(RTL)/Cassette_Write.sv \
|
|
$(RTL)/cocokey.v \
|
|
$(RTL)/PS2_Key/ps2_keyboard.v \
|
|
$(RTL)/UART_6551/uart_6551.v \
|
|
$(RTL)/UART_6551/6551tx.v \
|
|
$(RTL)/UART_6551/6551rx.v \
|
|
$(RTL)/mc6809glb/mc6809glb.v \
|
|
$(RTL)/Mister_Video.v
|
|
|
|
C_SRC = \
|
|
sim_main.cpp dis6809.cpp serial.cpp \
|
|
sim/sim_bus.cpp sim/sim_clock.cpp sim/sim_console.cpp sim/sim_video.cpp \
|
|
sim/sim_blkdevice.cpp sim/sim_input.cpp sim/sim_audio.cpp \
|
|
sim/imgui/imgui_impl_sdl.cpp sim/imgui/imgui_impl_opengl2.cpp \
|
|
sim/imgui/imgui_draw.cpp sim/imgui/imgui_widgets.cpp sim/imgui/imgui_tables.cpp \
|
|
sim/imgui/imgui.cpp sim/imgui/ImGuiFileDialog.cpp \
|
|
sim/imgui/implot.cpp sim/imgui/implot_items.cpp
|
|
|
|
VOUT = obj_dir/Vemu.cpp
|
|
|
|
all: $(EXE)
|
|
|
|
$(VOUT): $(V_SRC) Makefile
|
|
$V -cc $(V_OPT) -LDFLAGS "$(LDFLAGS)" -exe --Mdir ./obj_dir \
|
|
$(V_DEFINE) $(TOP) -CFLAGS "$(CXXFLAGS)" $(V_SRC) $(C_SRC)
|
|
|
|
$(EXE): $(VOUT) $(C_SRC) sim/*.h dis6809.h serial.h
|
|
(cd obj_dir; $(MAKE) -f Vemu.mk OBJCACHE= OPT_FAST="-O2" OPT_SLOW="-O0" OPT_GLOBAL="-O2")
|
|
|
|
lint:
|
|
$V --lint-only $(V_DEFINE) -Wno-WIDTH $(TOP) $(V_SRC)
|
|
|
|
mem:
|
|
python3 gen_mem.py
|
|
|
|
run: all
|
|
$(EXE)
|
|
|
|
headless: all
|
|
$(EXE) --headless --stop-at-frame 150 --screenshot 150
|
|
|
|
test: all
|
|
./run_tests.sh
|
|
|
|
clean:
|
|
rm -rf obj_dir
|
|
|
|
.PHONY: all lint mem run headless test clean
|
|
|
|
# Disassembler self-check. Standalone -- no Verilator, no core.
|
|
distest: dis6809_test.cpp dis6809.cpp dis6809.h
|
|
mkdir -p obj_dir && c++ -O1 -o obj_dir/distest dis6809_test.cpp dis6809.cpp -I. && ./obj_dir/distest
|
|
|
|
.PHONY: distest
|