Files
CoCo3_Plus_MiSTer/rtl/config.sv
shodge12 1da70a7929 Core changes and CSAVE support.
1.	Added support for cassette save.  To use: A) You have to have a file [anyname.cas]
	which is larger than needed.  B) Select the file through the UI Menu 'Save
	Cassette'.  C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"'
	E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write.  The file can
	now be loaded or copied.  Note a dummy file of a specific size can be created in
	the MiSTer SSH shell in the /media/fat/games/coco3 with the command:
	'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length]
2.	Fixed serial interrupt [6551] to not be functional on slot 3 [carts].
3.	Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used
	for logic analyzer debug.  This will only occur when `define	Config_Debug is
	enabled in config.v.
4.	Fixed MUGS of powerup issue occurring on some MiSTer units.
5.	Fixed incorrect application of GIME_IRQ on legacy interrupts.  Fixed race condition
	on reading IRQ status vs clearing the interrupt.
6.	Improved Castle of Tharoggad.  App now loads but locks as the graphics animate.  This
	change improved mmu usage through to CARTS.
7.	Builds now keep track of multiple builds in the same date.  It shows as V240512-001 in
	the menus.  Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is
	supplied in the archive to show how it works.
8.	Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font -
	IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format.
	Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display
	a clock.
9.	Large improvement in the Timer function.  Code closer emulates COCO3 Timer. Fixes
	Sliphead cart.
10.	In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for
	the FDC.  This saved space but introduced a bug when using multiple drives at the same
	time - like a copy command.  This change was removed and the copy command works again.

To Do...
1.	Add Speech / Music cart
2.	Fix Castle of Tharoggad
2024-05-14 23:00:16 -04:00

108 lines
4.4 KiB
Systemverilog

////////////////////////////////////////////////////////////////////////////////
// Project Name: CoCo3FPGA Version 5.x.x
// File Name: config.v
//
// CoCo3 in an FPGA
//
////////////////////////////////////////////////////////////////////////////////
//
// CPU section copyrighted by John Kent
//
////////////////////////////////////////////////////////////////////////////////
//
// Color Computer 3 compatible system on a chip
//
// Version : 5.x
//
// Copyright (c) 2008 Gary Becker ([email protected])
//
// All rights reserved
//
// Redistribution and use in source and synthezised forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// Redistributions in synthesized form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// Neither the name of the author nor the names of other contributors may
// be used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Please report bugs to the author, but before you do so, please
// make sure that this is not a derivative work and that
// you have the latest version of this file.
//
////////////////////////////////////////////////////////////////////////////////
// Gary Becker
// [email protected]
////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
// MISTer Conversion by Stan Hodge and Alan Steremberg (& Gary Becker)
// [email protected]
//
////////////////////////////////////////////////////////////////////////////////
// This file is a configuration definition file. The CoCo3FPGA for MiSTer source files
// can be built into multiple objects which have mutually exclusive features.
`define Config_Debug_FLAG 4'hA
localparam [7:0] FEATURE_1 = 8'h01;
localparam [7:0] FEATURE_2 = 8'h02;
localparam [7:0] FEATURE_3 = 8'h04;
localparam [7:0] FEATURE_4 = 8'h08;
localparam [7:0] FEATURE_5 = 8'h10;
localparam [7:0] FEATURE_6 = 8'h20;
localparam [7:0] FEATURE_7 = 8'h40;
localparam [7:0] FEATURE_8 = 8'h80;
// This is used for hardware debugging - it overrides the USER_IO to be user_out direct.
// It should be commented out for release
//`define Config_Debug
// Feature list - note only FEATURE_1 - FEATURE_8 are supported
///////////////////////////////////////////////////////////////////////////////////////////////////////////
// `set_feature(CoCo3_Horz_INT_FIX,Feat_1) // Connection of the horz int to the Mister CoCo3 V5 rasterizer
`define CoCo3_Horz_INT_FIX
`define Feat_1
// `set_feature(CoCo3_Vert_INT_FIX,Feat_2) // Connection of the vert int to the Mister CoCo3 V5 rasterizer
// `define CoCo3_Vert_INT_FIX
// `define Feat_2
// `set_feature(CoCo3_CYC_ACC_6809,Feat_3) // Use cycle accurate 6809
`define CoCo3_CYC_ACC_6809
`define Feat_3
// `set_feature(CoCo3_sdc_override_size,Feat_4) // Define static size value
`define CoCo3_sdc_override_size
`define Feat_4
// `set_feature(CoCo3_sdc_fix_os9_driver,Feat_5) // fix sdc query disk size issue in llcocosdc driver in multipak enviroment
`define CoCo3_sdc_fix_os9_driver
`define Feat_5
// `set_feature(CoCo3_disable_GART_in_GIMEX,Feat_6) // Disable GIMEX ram transfers [GIMEX detection in OS9 EOU]
`define CoCo3_disable_GART_in_GIMEX
`define Feat_6
// `set_feature(CoCo3_Select_GIMEX_RAST,Feat_7) // Use GIMEX Rasterizer Engine
// `define CoCo3_Select_GIMEX_RAST
// `define Feat_7