Files
bholman cb40fed3b9 Introduce Coco 3 Plus for MiSTer
Add original-firmware Sound & Speech, four configurable Multi-Pak sockets,
bounded per-slot ROM allocation and a nine-page menu organized around devices
and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit
conditional external-I/O timing contracts. Preserve native Main startup-file
ordering, saved layouts, stock-core separation and the coco3plus media profile.

Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh
Quartus builds, functional and fitted timing checks, reviewed release packaging
and passwordless SSH installation with backups. Retain original component
notices, document contribution copyright and keep SSC ROM inputs outside Git.

Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs,
368 both-corner timing scopes and eight tooling-integrity checks pass.
The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready.
Physical cold power cycling and conditional board-delay assumptions remain
separate. Full original upstream histories are preserved before this single
consolidated implementation commit.
2026-11-18 16:00:45 -07:00

37 lines
2.0 KiB
Systemverilog

`timescale 1ns/1ps
module reset_domains_tb;
reg clk_sys=0,CLK_114=0,run_sys=1,run_fast=1,RESET_RAW_N=1;
always #10 if(run_sys) clk_sys=~clk_sys;
always #5 if(run_fast) CLK_114=~CLK_114;
wire RESET_N,RESET_POS_N,RESET_FAST_N,WD_RESET_N;
actual_reset_domains dut(clk_sys,CLK_114,RESET_RAW_N,RESET_N,RESET_POS_N,RESET_FAST_N);
actual_wd_release disk(clk_sys,RESET_N,WD_RESET_N);
reg observing=0;
always @(posedge RESET_N) if(observing && clk_sys!==0) $fatal(1,"main reset released on wrong phase");
always @(posedge RESET_POS_N) if(observing && clk_sys!==1) $fatal(1,"positive reset released on wrong phase");
always @(posedge RESET_FAST_N) if(observing && CLK_114!==1) $fatal(1,"fast reset released on wrong phase");
always @(posedge WD_RESET_N) if(observing && clk_sys!==1) $fatal(1,"disk reset released on wrong phase");
integer phase;
initial begin
repeat(5) @(negedge clk_sys);observing=1;
for(phase=0;phase<7;phase=phase+1) begin
#(phase+1);RESET_RAW_N=0;#1;
if({RESET_N,RESET_POS_N,RESET_FAST_N,WD_RESET_N}!==0) $fatal(1,"asynchronous domain assertion missing");
@(negedge clk_sys);run_sys=0;run_fast=0;
#13;RESET_RAW_N=1;#40;
if({RESET_N,RESET_POS_N,RESET_FAST_N,WD_RESET_N}!==0) $fatal(1,"stopped clocks released reset");
run_sys=1;
@(negedge clk_sys);#1;if(RESET_N!==0) $fatal(1,"main released after only one edge");
@(negedge clk_sys);#1;if(RESET_N!==1 || RESET_FAST_N!==0) $fatal(1,"main/fast release ordering wrong");
@(posedge clk_sys);#1;if(WD_RESET_N!==0) $fatal(1,"disk released after one edge");
@(posedge clk_sys);#1;if(WD_RESET_N!==1) $fatal(1,"disk release missing");
run_fast=1;
@(posedge CLK_114);#1;if(RESET_FAST_N!==0) $fatal(1,"fast released after one edge");
@(posedge CLK_114);#1;if(RESET_FAST_N!==1) $fatal(1,"fast release missing");
end
$display("PASS actual domain and WD reset chains: seven phases, asynchronous assertion, two consuming edges, independently stopped clocks and release phases");
$finish;
end
initial begin #10000;$fatal(1,"domain reset timeout");end
endmodule