Add original-firmware Sound & Speech, four configurable Multi-Pak sockets, bounded per-slot ROM allocation and a nine-page menu organized around devices and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit conditional external-I/O timing contracts. Preserve native Main startup-file ordering, saved layouts, stock-core separation and the coco3plus media profile. Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh Quartus builds, functional and fitted timing checks, reviewed release packaging and passwordless SSH installation with backups. Retain original component notices, document contribution copyright and keep SSC ROM inputs outside Git. Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs, 368 both-corner timing scopes and eight tooling-integrity checks pass. The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready. Physical cold power cycling and conditional board-delay assumptions remain separate. Full original upstream histories are preserved before this single consolidated implementation commit.
81 lines
3.5 KiB
Systemverilog
81 lines
3.5 KiB
Systemverilog
`timescale 1ns/1ps
|
|
module cpu_sdram_bridge_tb;
|
|
reg clk=1,fast=1,reset=1;
|
|
always #10 clk=~clk;
|
|
always #5 fast=~fast;
|
|
reg [24:0] address=0;
|
|
reg [7:0] data=0;
|
|
reg request=0,read_cycle=1;
|
|
wire [24:0] tx_address;
|
|
wire [7:0] tx_data;
|
|
wire tx_request,tx_read,ack,controller_ack,ready;
|
|
cpu_sdram_bridge dut(clk,fast,reset,address,data,request,read_cycle,controller_ack,ack,tx_address,tx_data,tx_read,tx_request);
|
|
wire [15:0] dq,dout;
|
|
wire [12:0] row;
|
|
wire [1:0] bank;
|
|
wire ras,cas,we;
|
|
// Constant read bus, not a physical SDRAM array/timing model.
|
|
assign dq=we?16'ha55a:16'hzzzz;
|
|
sdram_32r8w memory(.init(reset),.clk(fast),.SDRAM_DQ(dq),.SDRAM_A(row),.SDRAM_BA(bank),
|
|
.SDRAM_nRAS(ras),.SDRAM_nCAS(cas),.SDRAM_nWE(we),.sdram_dout(dout),
|
|
.sdram_cpu_addr(tx_address),.sdram_cpu_din(tx_data),.sdram_cpu_req(tx_request),
|
|
.sdram_cpu_rnw(tx_read),.sdram_cpu_ack(controller_ack),.sdram_cpu_ready(ready),
|
|
.sdram_vid_addr(25'd0),.sdram_vid_req(1'b0));
|
|
reg [24:0] expected_address;
|
|
reg [7:0] expected_data;
|
|
reg expected_read,checking=0;
|
|
reg ready_seen=0;
|
|
reg [15:0] returned_data;
|
|
integer activations=0,commands=0,transactions=0;
|
|
always @(posedge fast) begin
|
|
#1;
|
|
if(checking) begin
|
|
if(ready) begin ready_seen=1;returned_data=dout;end
|
|
if({ras,cas,we}===3'b011) begin
|
|
if(row!==expected_address[22:10] || bank!==expected_address[24:23]) $fatal(1,"wrong row/bank payload");
|
|
activations=activations+1;
|
|
end
|
|
if({ras,cas,we}===3'b101 || {ras,cas,we}===3'b100) begin
|
|
if(row[8:0]!==expected_address[9:1] || row[10:9]!==2'b10) $fatal(1,"wrong column/autoprecharge");
|
|
if(row[12:11] !== (expected_read?2'b00:{~expected_address[0],expected_address[0]})) $fatal(1,"wrong byte mask");
|
|
if((we===1)!==expected_read) $fatal(1,"wrong read/write command");
|
|
if(!expected_read && dq!=={expected_data,expected_data}) $fatal(1,"wrong binary write data");
|
|
commands=commands+1;
|
|
end
|
|
end
|
|
end
|
|
task transaction(input [24:0] a,input [7:0] d,input reg r);
|
|
integer count,old_commands,old_activations;
|
|
begin
|
|
@(posedge clk);#2;
|
|
expected_address=a;expected_data=d;expected_read=r;
|
|
old_commands=commands;old_activations=activations;
|
|
address=a;data=d;read_cycle=r;checking=1;request=1;ready_seen=0;
|
|
count=0;
|
|
while(ack!==1 && count<1000) begin @(negedge fast);#1;count=count+1;end
|
|
if(ack!==1) $fatal(1,"request acknowledgement timeout");
|
|
// Once acknowledged, decode inputs may change; the transaction stays captured.
|
|
@(negedge clk);#1;request=0;address=~a;data=~d;read_cycle=~r;
|
|
count=0;
|
|
while(ready_seen!==1 && count<1000) begin @(negedge fast);#1;count=count+1;end
|
|
if(ready_seen!==1) $fatal(1,"transaction completion timeout");
|
|
if(r && returned_data!==16'ha55a) $fatal(1,"read return data missing");
|
|
repeat(5) @(negedge clk);
|
|
#2;
|
|
if(commands!=old_commands+1 || activations!=old_activations+1) $fatal(1,"lost/duplicate transaction");
|
|
if(tx_request!==0 || ack!==0) $fatal(1,"request/ack did not clear");
|
|
checking=0;transactions=transactions+1;
|
|
end
|
|
endtask
|
|
integer i;
|
|
initial begin
|
|
repeat(8) @(negedge clk);reset=0;
|
|
repeat(26000) @(negedge fast); // Complete >=200 us SDRAM initialization.
|
|
for(i=0;i<25;i=i+1) begin transaction(25'b1<<i,8'h55,0);transaction(~(25'b1<<i),8'haa,1);end
|
|
for(i=0;i<256;i=i+1) begin transaction($random,i,0);transaction($random,i,1);end
|
|
$display("PASS %0d bridge + actual SDRAM-controller transactions: all address bits/banks/byte masks, all 256 write bytes, read/ack/ready, refresh stalls, no duplicates",transactions);
|
|
$finish;
|
|
end
|
|
initial begin #10000000;$fatal(1,"SDRAM bridge regression timeout");end
|
|
endmodule
|