Files
bholman cb40fed3b9 Introduce Coco 3 Plus for MiSTer
Add original-firmware Sound & Speech, four configurable Multi-Pak sockets,
bounded per-slot ROM allocation and a nine-page menu organized around devices
and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit
conditional external-I/O timing contracts. Preserve native Main startup-file
ordering, saved layouts, stock-core separation and the coco3plus media profile.

Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh
Quartus builds, functional and fitted timing checks, reviewed release packaging
and passwordless SSH installation with backups. Retain original component
notices, document contribution copyright and keep SSC ROM inputs outside Git.

Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs,
368 both-corner timing scopes and eight tooling-integrity checks pass.
The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready.
Physical cold power cycling and conditional board-delay assumptions remain
separate. Full original upstream histories are preserved before this single
consolidated implementation commit.
2026-11-18 16:00:45 -07:00

71 lines
3.3 KiB
Systemverilog

// Original Coco 3 Plus contributions: Copyright (c) 2026 Brian K. Holman.
// Original component notices/terms retained; see COPYRIGHT.md and LICENSING.md.
// SPDX-License-Identifier: BSD-3-Clause
// Single-chip PIC7040 RF/ROM map and peripheral bus adapter. See LICENSE.
// ROM is volatile, sequentially loaded 0..4095 after rom_begin. No ROM bytes
// are built into this source. A malformed load invalidates the image.
module ssc_tms7000_memory(input wire clk,reset,
input wire rom_begin,rom_write,input wire [11:0] rom_address,input wire [7:0] rom_data,
output reg rom_loaded,load_error,output reg initialized,
input wire request,write,peripheral,input wire [15:0] address,input wire [7:0] write_data,
output reg ready,output reg [7:0] read_data,
output reg pf_request,pf_write,output reg [7:0] pf_address,pf_write_data,
input wire pf_ready,input wire [7:0] pf_read_data);
localparam [2:0] IDLE=0,EXECUTE=1,READ_RETURN=2,PF_WAIT=3,PF_RELEASE=4,WAIT_RELEASE=5;
reg [2:0] state;
reg [7:0] rf[0:127],rom[0:4095];
reg [7:0] rf_read,rom_read;
reg [6:0] clear_address;
reg [15:0] access_address;
reg [7:0] access_data;
reg access_write,access_peripheral,loading;
reg [11:0] expected_address;
wire rf_store=initialized && !rom_begin && state==EXECUTE && access_write && access_address<128 && !access_peripheral;
wire rom_store=!reset && !rom_begin && rom_write && loading && !load_error && rom_address==expected_address;
always @(posedge clk)begin
rf_read<=rf[access_address[6:0]];rom_read<=rom[access_address[11:0]];
if(!reset && !initialized)rf[clear_address]<=0;
else if(!reset && rf_store)rf[access_address[6:0]]<=access_data;
if(rom_store)rom[rom_address]<=rom_data;
end
always @(posedge clk)begin
if(reset)begin
initialized<=0;clear_address<=0;state<=IDLE;ready<=0;read_data<=0;
access_address<=0;access_data<=0;access_write<=0;access_peripheral<=0;
pf_request<=0;pf_write<=0;pf_address<=0;pf_write_data<=0;
rom_loaded<=0;load_error<=0;loading<=0;expected_address<=0;
end else begin
if(!initialized)begin
if(clear_address==127)initialized<=1;else clear_address<=clear_address+7'd1;
end
if(rom_begin)begin rom_loaded<=0;load_error<=0;loading<=1;expected_address<=0;end
else if(rom_write)begin
if(!loading || load_error || rom_address!=expected_address)begin rom_loaded<=0;load_error<=1;loading<=0;end
else if(expected_address==4095)begin rom_loaded<=1;loading<=0;end
else expected_address<=expected_address+12'd1;
end
if(rom_begin)begin state<=IDLE;ready<=0;pf_request<=0;end
else case(state)
IDLE:if(initialized && request)begin
access_address<=address;access_data<=write_data;access_write<=write;access_peripheral<=peripheral;
state<=EXECUTE;
end
EXECUTE:begin
if(access_peripheral || (access_address>=16'h100 && access_address<16'h10c))begin
pf_request<=1;pf_write<=access_write;pf_address<=access_address[7:0];pf_write_data<=access_data;state<=PF_WAIT;
end else state<=READ_RETURN;
end
READ_RETURN:begin
read_data<=access_address<128?rf_read:access_address<256?8'h00:
access_address>=16'hf000 ? rom_read:8'hff;
ready<=1;state<=WAIT_RELEASE;
end
PF_WAIT:if(pf_ready)begin read_data<=pf_read_data;pf_request<=0;state<=PF_RELEASE;end
PF_RELEASE:if(!pf_ready)begin ready<=1;state<=WAIT_RELEASE;end
WAIT_RELEASE:if(!request)begin ready<=0;state<=IDLE;end
default:state<=IDLE;
endcase
end
end
endmodule