Add original-firmware Sound & Speech, four configurable Multi-Pak sockets, bounded per-slot ROM allocation and a nine-page menu organized around devices and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit conditional external-I/O timing contracts. Preserve native Main startup-file ordering, saved layouts, stock-core separation and the coco3plus media profile. Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh Quartus builds, functional and fitted timing checks, reviewed release packaging and passwordless SSH installation with backups. Retain original component notices, document contribution copyright and keep SSC ROM inputs outside Git. Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs, 368 both-corner timing scopes and eight tooling-integrity checks pass. The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready. Physical cold power cycling and conditional board-delay assumptions remain separate. Full original upstream histories are preserved before this single consolidated implementation commit.
71 lines
3.3 KiB
Systemverilog
71 lines
3.3 KiB
Systemverilog
// Original Coco 3 Plus contributions: Copyright (c) 2026 Brian K. Holman.
|
|
// Original component notices/terms retained; see COPYRIGHT.md and LICENSING.md.
|
|
// SPDX-License-Identifier: BSD-3-Clause
|
|
// Single-chip PIC7040 RF/ROM map and peripheral bus adapter. See LICENSE.
|
|
// ROM is volatile, sequentially loaded 0..4095 after rom_begin. No ROM bytes
|
|
// are built into this source. A malformed load invalidates the image.
|
|
module ssc_tms7000_memory(input wire clk,reset,
|
|
input wire rom_begin,rom_write,input wire [11:0] rom_address,input wire [7:0] rom_data,
|
|
output reg rom_loaded,load_error,output reg initialized,
|
|
input wire request,write,peripheral,input wire [15:0] address,input wire [7:0] write_data,
|
|
output reg ready,output reg [7:0] read_data,
|
|
output reg pf_request,pf_write,output reg [7:0] pf_address,pf_write_data,
|
|
input wire pf_ready,input wire [7:0] pf_read_data);
|
|
localparam [2:0] IDLE=0,EXECUTE=1,READ_RETURN=2,PF_WAIT=3,PF_RELEASE=4,WAIT_RELEASE=5;
|
|
reg [2:0] state;
|
|
reg [7:0] rf[0:127],rom[0:4095];
|
|
reg [7:0] rf_read,rom_read;
|
|
reg [6:0] clear_address;
|
|
reg [15:0] access_address;
|
|
reg [7:0] access_data;
|
|
reg access_write,access_peripheral,loading;
|
|
reg [11:0] expected_address;
|
|
wire rf_store=initialized && !rom_begin && state==EXECUTE && access_write && access_address<128 && !access_peripheral;
|
|
wire rom_store=!reset && !rom_begin && rom_write && loading && !load_error && rom_address==expected_address;
|
|
always @(posedge clk)begin
|
|
rf_read<=rf[access_address[6:0]];rom_read<=rom[access_address[11:0]];
|
|
if(!reset && !initialized)rf[clear_address]<=0;
|
|
else if(!reset && rf_store)rf[access_address[6:0]]<=access_data;
|
|
if(rom_store)rom[rom_address]<=rom_data;
|
|
end
|
|
always @(posedge clk)begin
|
|
if(reset)begin
|
|
initialized<=0;clear_address<=0;state<=IDLE;ready<=0;read_data<=0;
|
|
access_address<=0;access_data<=0;access_write<=0;access_peripheral<=0;
|
|
pf_request<=0;pf_write<=0;pf_address<=0;pf_write_data<=0;
|
|
rom_loaded<=0;load_error<=0;loading<=0;expected_address<=0;
|
|
end else begin
|
|
if(!initialized)begin
|
|
if(clear_address==127)initialized<=1;else clear_address<=clear_address+7'd1;
|
|
end
|
|
if(rom_begin)begin rom_loaded<=0;load_error<=0;loading<=1;expected_address<=0;end
|
|
else if(rom_write)begin
|
|
if(!loading || load_error || rom_address!=expected_address)begin rom_loaded<=0;load_error<=1;loading<=0;end
|
|
else if(expected_address==4095)begin rom_loaded<=1;loading<=0;end
|
|
else expected_address<=expected_address+12'd1;
|
|
end
|
|
if(rom_begin)begin state<=IDLE;ready<=0;pf_request<=0;end
|
|
else case(state)
|
|
IDLE:if(initialized && request)begin
|
|
access_address<=address;access_data<=write_data;access_write<=write;access_peripheral<=peripheral;
|
|
state<=EXECUTE;
|
|
end
|
|
EXECUTE:begin
|
|
if(access_peripheral || (access_address>=16'h100 && access_address<16'h10c))begin
|
|
pf_request<=1;pf_write<=access_write;pf_address<=access_address[7:0];pf_write_data<=access_data;state<=PF_WAIT;
|
|
end else state<=READ_RETURN;
|
|
end
|
|
READ_RETURN:begin
|
|
read_data<=access_address<128?rf_read:access_address<256?8'h00:
|
|
access_address>=16'hf000 ? rom_read:8'hff;
|
|
ready<=1;state<=WAIT_RELEASE;
|
|
end
|
|
PF_WAIT:if(pf_ready)begin read_data<=pf_read_data;pf_request<=0;state<=PF_RELEASE;end
|
|
PF_RELEASE:if(!pf_ready)begin ready<=1;state<=WAIT_RELEASE;end
|
|
WAIT_RELEASE:if(!request)begin ready<=0;state<=IDLE;end
|
|
default:state<=IDLE;
|
|
endcase
|
|
end
|
|
end
|
|
endmodule
|