Add original-firmware Sound & Speech, four configurable Multi-Pak sockets, bounded per-slot ROM allocation and a nine-page menu organized around devices and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit conditional external-I/O timing contracts. Preserve native Main startup-file ordering, saved layouts, stock-core separation and the coco3plus media profile. Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh Quartus builds, functional and fitted timing checks, reviewed release packaging and passwordless SSH installation with backups. Retain original component notices, document contribution copyright and keep SSC ROM inputs outside Git. Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs, 368 both-corner timing scopes and eight tooling-integrity checks pass. The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready. Physical cold power cycling and conditional board-delay assumptions remain separate. Full original upstream histories are preserved before this single consolidated implementation commit.
53 lines
2.6 KiB
Systemverilog
53 lines
2.6 KiB
Systemverilog
// Original Coco 3 Plus contributions: Copyright (c) 2026 Brian K. Holman.
|
|
// Original component notices/terms retained; see COPYRIGHT.md and LICENSING.md.
|
|
// SPDX-License-Identifier: BSD-3-Clause
|
|
// TMS7000 arithmetic/flags, from VCCPlus a8a84f22/MAME hap, Tim Lindner.
|
|
// Decimal/multiply use separate registered datapaths. Carry conventions: LICENSE.
|
|
module ssc_tms7000_alu(input wire [5:0] operation,
|
|
input wire [15:0] destination, input wire [7:0] source,status,
|
|
output reg [15:0] result, output reg [7:0] next_status,
|
|
output reg writeback, output reg branch, output reg [5:0] extra_cycles);
|
|
`include "ssc_tms7000_defs.vh"
|
|
reg [16:0] temp;
|
|
reg [8:0] flags_value;
|
|
reg set_flags,subtract;
|
|
always @* begin
|
|
temp=0;flags_value=0;result=0;next_status=status;writeback=1;branch=0;
|
|
extra_cycles=0;set_flags=1;subtract=0;
|
|
case(operation)
|
|
OP_MOV:temp={9'd0,source};
|
|
OP_AND:temp={9'd0,(destination[7:0]&source)};
|
|
OP_OR:temp={9'd0,(destination[7:0]|source)};
|
|
OP_XOR:temp={9'd0,(destination[7:0]^source)};
|
|
OP_BTJO,OP_BTJZ:begin
|
|
temp={9'd0,((operation==OP_BTJO?destination[7:0]:~destination[7:0])&source)};
|
|
writeback=0;branch=(temp!=0);extra_cycles=branch?6'd4:6'd2;
|
|
end
|
|
OP_ADD:temp={9'd0,destination[7:0]}+{9'd0,source};
|
|
OP_ADC:temp={9'd0,destination[7:0]}+{9'd0,source}+{16'd0,status[7]};
|
|
OP_SUB,OP_CMP:begin temp={9'd0,destination[7:0]}-{9'd0,source};subtract=1;writeback=(operation!=OP_CMP);end
|
|
OP_SBB:begin temp={9'd0,destination[7:0]}-{9'd0,source}-{16'd0,!status[7]};subtract=1;end
|
|
// MPY has its own registered datapath in the instruction engine.
|
|
OP_DEC:begin temp={9'd0,destination[7:0]}-17'd1;subtract=1;end
|
|
OP_INC:temp={9'd0,destination[7:0]}+17'd1;
|
|
OP_INV:temp={9'd0,~destination[7:0]};
|
|
OP_CLR:temp=0;
|
|
OP_XCHB:begin temp={9'd0,source};extra_cycles=1;end
|
|
OP_SWAP:begin temp={5'd0,destination[7:0],4'd0}|{13'd0,destination[7:4]};extra_cycles=3;end
|
|
OP_RR:temp={1'd0,destination[7:0],destination[0],destination[7:1]};
|
|
OP_RRC:temp={1'd0,destination[7:0],status[7],destination[7:1]};
|
|
OP_RL:temp={8'd0,destination[7:0],destination[7]};
|
|
OP_RLC:temp={8'd0,destination[7:0],status[7]};
|
|
OP_DJNZ:begin temp={9'd0,destination[7:0]}-17'd1;branch=(temp[15:0]!=0);extra_cycles=branch?6'd4:6'd2;set_flags=0;end
|
|
OP_DECD:begin temp={1'b0,destination}-17'd1;subtract=1;end
|
|
default:begin writeback=0;set_flags=0;end
|
|
endcase
|
|
result=temp[15:0];
|
|
flags_value=(operation==OP_MPY || operation==OP_DECD)?temp[16:8]:temp[8:0];
|
|
if(set_flags) begin
|
|
next_status={flags_value[8],flags_value[7],(flags_value[7:0]==0),status[4:0]};
|
|
if(subtract) next_status[7]=!flags_value[8];
|
|
end
|
|
end
|
|
endmodule
|