Files
shodge12 f93784660c Fix PIA2 adrs, added Auto Run
1.	Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2.	Removal of 16 bit sound extentions as they overlap speach / sound cart.  This is
	accompanied by a rework of the sound mixing to be more correct.
3.	Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0
4.	Added 'Auto Run' feature.  You must use slot 2 [SDC].  Take your floopy or HD
	and copy it to a file name of 'boot.vhd'.  This will be auto mounted to drive 0
	on the SDC.  In the menu, find a new item Auto Run:.  It can be set to No, DOS or
	AUTO.BAS.  Choosing dos causes the 'DOS' command to be executed on power up.  Setting
	the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
	Save your settings to cause the changes to be remembered.  The Auto Run system re-arms
	upon using the 'Cold Boot' menu item.

To Do...
1.	Add Speech / Music cart
2.	Fix Color File II
3.	Fic Castle of Tharoggad
2024-02-16 22:27:15 -05:00

58 lines
3.1 KiB
Plaintext

1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Removal of 16 bit sound extentions as they overlap speach / sound cart. This is
accompanied by a rework of the sound mixing to be more correct.
3. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0
4. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
To Do...
1. Add Speech / Music cart
2. Fix Color File II
3. Fic Castle of Tharoggad
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to
enable artifacts. That is no longer true. For most compatibility it has be relabeled 'CoCo3 LC',
and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
For some OS9 software this must be set to 'Yes' which is the default.
4. Added 'Artifact Type' menu in 'Video Settings' menu. Settings are 'MESS', 'Simple', and 'NONE'. 'MESS'
is the default and has improved fidelity over 'Simple' which was previously implemented in connection
with SW5 [see above]. Again, the default should be used. The artifact emulation can be turned off
by setting the option to 'NONE'. The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
artifact settings.
To Do...
1. Change PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Fix Color File II
3. Fic Castle of Tharoggad
CTF = Compile Time Feature...
1. Interrupt system restored to previous code - improved compadibility.
2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3. Recoded sdc and fdc to only have one instance of the wd1773.
4. Re-added software disable in sdc [Ext 'g'].
5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11 Corrected missing begin statement in master timing loop.
12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
14. Updated MiSTer framework