1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the
max value of 63. Specifically '>' was changed to '>=' the DTOA values.
This fixes DonPan and is verified in Diagnostics 2.0.
5. HiRES[3] is used to enable some of the higher resolution graphics modes
Gary Becker designed into CoCo3FPGA, and while these are not fully
supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt
the graphics engine. For some reason Color File II manipultes this bit
and was causing it not to work. This change requires the SG6 extensions
to be enabled to set HiRES[3]. So specifically in the Video Settings
insure CoCo3 LC is set to Yes. Color File II now works properly.
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2. Changed PIA(s) addressing to alow complete mirror through FF00-FF3F
CTF = Compile Time Feature...
1. Interrupt system restored to previous code - improved compadibility.
2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3. Recoded sdc and fdc to only have one instance of the wd1773.
4. Re-added software disable in sdc [Ext 'g'].
5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11 Corrected missing begin statement in master timing loop.
12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
To Do
0. Update framework