1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the
max value of 63. Specifically '>' was changed to '>=' the DTOA values.
This fixes DonPan and is verified in Diagnostics 2.0.
5. HiRES[3] is used to enable some of the higher resolution graphics modes
Gary Becker designed into CoCo3FPGA, and while these are not fully
supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt
the graphics engine. For some reason Color File II manipultes this bit
and was causing it not to work. This change requires the SG6 extensions
to be enabled to set HiRES[3]. So specifically in the Video Settings
insure CoCo3 LC is set to Yes. Color File II now works properly.
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Removal of 16 bit sound extentions as they overlap speach / sound cart. This is
accompanied by a rework of the sound mixing to be more correct.
3. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0
4. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
To Do...
1. Add Speech / Music cart
2. Fix Color File II
3. Fic Castle of Tharoggad
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to
enable artifacts. That is no longer true. For most compatibility it has be relabeled 'CoCo3 LC',
and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
For some OS9 software this must be set to 'Yes' which is the default.
4. Added 'Artifact Type' menu in 'Video Settings' menu. Settings are 'MESS', 'Simple', and 'NONE'. 'MESS'
is the default and has improved fidelity over 'Simple' which was previously implemented in connection
with SW5 [see above]. Again, the default should be used. The artifact emulation can be turned off
by setting the option to 'NONE'. The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
artifact settings.
Fixed minor change to MESS artifact function. Fixed full color bus not being driven. Updated docs. Updated changes.txt. SDC size return constant changed to $404040. Cleaned up Video Settings menu and defaults.