//------------------------------------------------------------------ // Copyright E J Jaquay 2022 // // This file is part of VCC (Virtual Color Computer). // // VCC (Virtual Color Computer) is free software: you can redistribute it // and/or modify it under the terms of the GNU General Public License as // published by the Free Software Foundation, either version 3 of the // License, or (at your option) any later version. // // VCC (Virtual Color Computer) is distributed in the hope that it will be // useful, but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. // // See the GNU General Public License for more details. You should have // received a copy of the GNU General Public License along with VCC // (Virtual Color Computer). If not see . // //------------------------------------------------------------------ // Defines //------------------------------------------------------------------ // Status Register // b0 Par Rx parity error // b1 Frm Rx framing error // B2 Ovr Rx data over run // b3 RxF Rx Data register full // b4 TxE Tx Data register empty // b5 DCD Data carrier (clear=active) // b6 DSR Data set ready (clear=active) // b7 IRQ Interrupt read status constexpr auto StatPar = 0x01u; constexpr auto StatFrm = 0x02u; constexpr auto StatOvr = 0x04u; constexpr auto StatRxF = 0x08u; constexpr auto StatTxE = 0x10u; constexpr auto StatDCD = 0x20u; constexpr auto StatDSR = 0x40u; constexpr auto StatIRQ = 0x80u; // Command register // b0 DTR Enable receive and interupts (set=enabled) // b1 RxI Receiver IRQ control by StatRxF (set=disabled) // b2-3 TIRB Transmit IRQ control // 00 trans disabled,01 enabled,10 disabled,11 break // b4 Echo Set=Activated // b5-7 Par Parity control // xx0 none, 001 Odd, 011 Even, 101 mark, 111 space constexpr auto CmdDTR = 0x01u; constexpr auto CmdRxI = 0x02u; constexpr auto CmdTIRB = 0x0Cu; constexpr auto TIRB_Off = 0x00u; constexpr auto TIRB_On = 0x04u; constexpr auto TIRB_RTS = 0x08u; constexpr auto TIRB_Brk = 0x0Cu; // Control Register // b0-3 Baud rate // { X,60,75,110, // 135,150,300,600, // 1200,1800,2400,3600, // 4800,7200,9600,19200 } // b4 Rcv Clock source 0=X 1=intenal // b5-6 Data len 00=8 01=7 10=6 11=5 // b7 Stop bits 0=1, 1-2 // Parity is index to [odd,even,mark,space] // BaudRate is index to [19200,50,75,110,135,150,300,600,1200, // 1800,2400,3600,4800 7200,9600,19200]