Files
CoCo3_Plus_MiSTer/rtl/Auto_Run.sv
T
shodge12 ede23da6b0 Timing fixes, Video mode fixes, Sound cleanup, and enabling RS-232 to physical SNAC pins.
1.	Overlay support for the detection of no rom loading on power up AND misc
    debugging. [done]
2.	Fix video HSCREEN 4 mode which is used in some demos and rs-232 terminal
	programs. [done]
3.	Reworked sound output to faithfully emulate the analog muxing in the coco.
	[done]
4.	Routing RS-232 tx/rx lines to the SNAC port for initial serial debugging
	of Fuji-Net interface. [done - untested]
2026-10-02 00:49:54 -04:00

265 lines
6.0 KiB
Systemverilog

////////////////////////////////////////////////////////////////////////////////
// Project Name: CoCo3FPGA Version 5.x.x
// File Name: Auto_Run.sv
//
// CoCo3 in an FPGA
//
////////////////////////////////////////////////////////////////////////////////
//
////////////////////////////////////////////////////////////////////////////////
//
// Color Computer 3 compatible system on a chip
//
//
// Copyright (c) 2008 Gary Becker ([email protected])
//
// All rights reserved
//
// Redistribution and use in source and synthezised forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// Redistributions in synthesized form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// Neither the name of the author nor the names of other contributors may
// be used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Please report bugs to the author, but before you do so, please
// make sure that this is not a derivative work and that
// you have the latest version of this file.
//
//
////////////////////////////////////////////////////////////////////////////////
// Stan Hodge
//
// Auto_Run by Stan Hodge 02/16/24
////////////////////////////////////////////////////////////////////////////////
module Auto_Run(
input RESET_N,
input CLK,
input CLK_1_78,
input [1:0] MPI_SCS, // slot id
input [1:0] MODE, // from MISTer subsystem 00=NONE, 01=DOS<RET>, 10=RUN"AUTO<RET>
input AMW_ACK, // from AMW subsystem - Cold Boot setup finished
input [72:0] KEY_IN, // Keystroke array
output [72:0] KEY_OUT // Modified Keystroke array
);
// Programs
// MODE = 01
// D O S <CR>
wire [7:0] DOS_KEYFILE[0:3] = '{8'd4, 8'd15, 8'd19, 8'd48};
// MODE = 10
// R U N <S> 2 A U T O <CR>
wire [7:0] RUN_KEYFILE[0:9] = '{8'd18, 8'd21, 8'd14, 8'd55, 8'd34, 8'd1, 8'd21, 8'd20, 8'd15, 8'd48};
localparam PRESS_KEY = 1'b1;
localparam RELEASE_KEY = 1'b0;
reg [3:0] index;
reg shift;
reg [7:0] char;
reg run; // 1=running
reg key_up_down;
reg timer_19_d;
// 300ms [600ms is aprox 1024000]
reg [19:0] timer;
// timer[19] changes state every 524288 counts, ~ 0.294 seconds.
reg timer_enable; // 1=run, 0=stop and clear
localparam st_beg0 = 4'd0;
localparam st_beg1 = 4'd1;
localparam st_beg2 = 4'd2;
localparam st_start = 4'd3;
localparam st_1 = 4'd4;
localparam st_2 = 4'd5;
localparam st_3 = 4'd6;
reg [3:0] state;
reg first_time = 1'b1;
/////////////////////////////////////////////////////////////
// Timer
always @ (negedge CLK or negedge RESET_N)
begin
if(!RESET_N)
begin
timer <= 20'b00000000000000000000;
end
else
begin
if (CLK_1_78)
begin
if (timer_enable)
timer <= timer + 1'b1;
else
timer <= 20'b00000000000000000000;
end
end
end
/////////////////////////////////////////////////////////////
// Output
always @(*)
begin
KEY_OUT <= KEY_IN;
if (run)
begin
if (shift)
begin
KEY_OUT[55] <= key_up_down;
KEY_OUT[char] <= key_up_down;
end
else
begin
KEY_OUT[char] <= key_up_down;
end
end
end
/////////////////////////////////////////////////////////////
// Main State Mach
always @ (negedge CLK or negedge RESET_N)
begin
if(!RESET_N)
begin
state <= st_beg0;
shift <= 1'b0;
index <= 4'd0;
run <= 1'b0;
timer_enable <= 1'b0;
key_up_down <= RELEASE_KEY;
timer_19_d <= 1'b0;
end
else
begin
if (AMW_ACK)
first_time <= 1'b1;
timer_19_d <= timer[19];
case(state)
st_beg0:
begin
timer_enable <= 1'b1;
if (!timer[19] && timer_19_d)
state <= st_beg1;
end
st_beg1:
begin
if (!timer[19] && timer_19_d)
state <= st_beg2;
end
st_beg2:
begin
if (!timer[19] && timer_19_d)
begin
state <= st_start;
timer_enable <= 1'b0;
end
end
st_start:
begin
if (first_time && (MPI_SCS == 2'b01))
begin
if (MODE == 2'b01) //DOS
begin
if (DOS_KEYFILE[index] == 8'd55)
shift <= 1'b1;
char <= DOS_KEYFILE[index];
run <= 1'b1;
state <= st_1;
end
else if (MODE == 2'b10) //RUN"AUTO
begin
if (RUN_KEYFILE[index] == 8'd55)
shift <= 1'b1;
char <= RUN_KEYFILE[index];
run <= 1'b1;
state <= st_1;
end
end
end
st_1:
begin
index <= index + 1'b1;
if (shift && (char == 8'd55)) // read next char
state <= st_start;
else
begin
timer_enable <= 1'b1;
key_up_down <= PRESS_KEY;
state <= st_2;
end
end
st_2:
begin
if (timer[17] == 1'b1) // 300ms time passed
begin
key_up_down <= RELEASE_KEY;
state <= st_3;
end
end
st_3:
begin
if (timer[17] == 1'b0) // 300ms time passed
begin
shift <= 1'b0;
timer_enable <= 1'b0;
if (char == 7'd48) // we are done
begin
first_time <= 1'b0;
run <= 1'b0;
end
state <= st_start;
end
end
default:;
endcase
end
end
endmodule