1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F. 2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0. 3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0 on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup. Save your settings to cause the changes to be remembered. The Auto Run system re-arms upon using the 'Cold Boot' menu item. 4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the max value of 63. Specifically '>' was changed to '>=' the DTOA values. This fixes DonPan and is verified in Diagnostics 2.0. 5. HiRES[3] is used to enable some of the higher resolution graphics modes Gary Becker designed into CoCo3FPGA, and while these are not fully supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt the graphics engine. For some reason Color File II manipultes this bit and was causing it not to work. This change requires the SG6 extensions to be enabled to set HiRES[3]. So specifically in the Video Settings insure CoCo3 LC is set to Yes. Color File II now works properly.
84 lines
3.8 KiB
Verilog
84 lines
3.8 KiB
Verilog
////////////////////////////////////////////////////////////////////////////////
|
|
// Project Name: CoCo3FPGA Version 5.x.x
|
|
// File Name: config.v
|
|
//
|
|
// CoCo3 in an FPGA
|
|
//
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// CPU section copyrighted by John Kent
|
|
//
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Color Computer 3 compatible system on a chip
|
|
//
|
|
// Version : 5.x
|
|
//
|
|
// Copyright (c) 2008 Gary Becker ([email protected])
|
|
//
|
|
// All rights reserved
|
|
//
|
|
// Redistribution and use in source and synthezised forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in synthesized form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// Neither the name of the author nor the names of other contributors may
|
|
// be used to endorse or promote products derived from this software without
|
|
// specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// Please report bugs to the author, but before you do so, please
|
|
// make sure that this is not a derivative work and that
|
|
// you have the latest version of this file.
|
|
//
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
// Gary Becker
|
|
// [email protected]
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
// MISTer Conversion by Stan Hodge and Alan Steremberg (& Gary Becker)
|
|
// [email protected]
|
|
//
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
// This file is a configuration definition file. The CoCo3FPGA for MiSTer source files
|
|
// can be built into multiple objects which have mutually exclusive features.
|
|
|
|
`include "../RTL/config_inc.v"
|
|
|
|
// If defined the Config_Debug sets the FEATURE MASKS all OR'd together which appears on COCO space at FFF1 & (FFF0 = 0x55 as a debug flag)
|
|
//`define Config_Debug
|
|
|
|
// Feature list - note only FEATURE_1 - FEATURE_8 are supported
|
|
///////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
`set_feature(CoCo3_Horz_INT_FIX, FEATURE_1) // Connection of the horz int to the Mister CoCo3 V5 rasterizer
|
|
|
|
//`set_feature(CoCo3_Vert_INT_FIX, FEATURE_2) // Connection of the vert int to the Mister CoCo3 V5 rasterizer
|
|
|
|
`set_feature(CoCo3_CYC_ACC_6809, FEATURE_3) // Use cycle accurate 6809
|
|
|
|
`set_feature(CoCo3_sdc_override_size, FEATURE_4) // Define static size value
|
|
|
|
`set_feature(CoCo3_sdc_fix_os9_driver, FEATURE_5) // fix sdc query disk size issue in llcocosdc driver in multipak enviroment
|
|
|
|
`set_feature(CoCo3_disable_GART_in_GIMEX, FEATURE_6)// Disable GIMEX ram transfers [GIMEX detection in OS( EOU]
|
|
|
|
//`set_feature(CoCo3_Select_GIMEX_RAST, FEATURE_7) // Use GIMEX Rasterizer Engine
|