verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule, screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette, and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA trace) with a minimal DriveWire server and a script to run the real FujiNet daemon against the sim. See verilator/README.md. - The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809). - sdram2.sv is simulated with its own controller logic and an SDR chip model. - run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on the text screen and byte-for-byte against test-ref/ screenshots. rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of inside generate blocks. They are assigned outside those blocks; Quartus accepted it, Verilator rejected spt_addr and silently split buff_wr into a separate net. No change on the FPGA (FM-7 made the same fix). Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
34 lines
1006 B
Verilog
34 lines
1006 B
Verilog
//============================================================================
|
|
// Verilog conversions of rtl/sram/*.vhd: synchronous write, asynchronous
|
|
// read, matching the VHDL (`DATA_O <= SRAM(ADDR)` outside the process).
|
|
//============================================================================
|
|
|
|
// rtl/sram/coco_ram.vhd -- 64K cassette buffer (R_W low = write)
|
|
module COCO_SRAM
|
|
(
|
|
input CLK,
|
|
input [15:0] ADDR,
|
|
input R_W,
|
|
input [7:0] DATA_I,
|
|
output [7:0] DATA_O
|
|
);
|
|
reg [7:0] SRAM [0:65535];
|
|
always @(posedge CLK) if (!R_W) SRAM[ADDR] <= DATA_I;
|
|
assign DATA_O = SRAM[ADDR];
|
|
endmodule
|
|
|
|
// rtl/sram/coco_vid_ram_buf.vhd -- 512 x 16 video line buffer
|
|
module COCO_VID_RAM_BUF
|
|
(
|
|
input CLK,
|
|
input [8:0] ADDR_I,
|
|
input [8:0] ADDR_O,
|
|
input WE,
|
|
input [15:0] DATA_I,
|
|
output [15:0] DATA_O
|
|
);
|
|
reg [15:0] SRAM [0:511];
|
|
always @(posedge CLK) if (WE) SRAM[ADDR_I] <= DATA_I;
|
|
assign DATA_O = SRAM[ADDR_O];
|
|
endmodule
|