Files
CoCo3_Plus_MiSTer/verilator/sim/sim_audio.cpp
Alan SterembergandClaude Opus 5.5 874f4f3083 Add Verilator simulation (ImGui + headless)
verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim
framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule,
screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette,
and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA
trace) with a minimal DriveWire server and a script to run the real FujiNet
daemon against the sim. See verilator/README.md.

- The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in
  verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809).
- sdram2.sv is simulated with its own controller logic and an SDR chip model.
- run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on
  the text screen and byte-for-byte against test-ref/ screenshots.

rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of
inside generate blocks. They are assigned outside those blocks; Quartus
accepted it, Verilator rejected spt_addr and silently split buff_wr into a
separate net. No change on the FPGA (FM-7 made the same fix).

Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
2026-10-02 07:15:44 -04:00

63 lines
1.2 KiB
C++

#include "sim_audio.h"
#include <iostream>
#include <fstream>
#include <list>
using namespace std;
SimClock clk;
bool outputToFile;
ofstream audioFile;
SimAudio::SimAudio(int systemClockFrequency, bool saveToFile)
{
clk = SimClock(systemClockFrequency / 44100);
outputToFile = saveToFile;
}
SimAudio::~SimAudio()
{
}
void SimAudio::Clock(signed short left, signed short right) {
clk.Tick();
if (clk.IsRising()) {
// Output audio (left channel only for now)
float l = left / 32768.0f;
if (outputToFile) {
audioFile.write((const char*)&l, sizeof(float));
}
}
}
void SimAudio::CollectDebug(signed short left, signed short right) {
float vol_l = left / 32768.0f;
float vol_r = right / 32768.0f;
debug_pos++;
if (debug_pos == debug_max_samples) { debug_pos = 0; }
debug_wave_l[debug_pos] = vol_l;
debug_wave_r[debug_pos] = vol_r;
}
void SimAudio::Initialise() {
// Reset plot data
for (int c = 0; c < debug_max_samples; c++) {
debug_wave_l[c] = 0;
debug_wave_r[c] = 0;
debug_positions[c] = (double)c / (double)debug_max_samples;
}
if (outputToFile)
{
// Setup Audio output stream
audioFile.open("audio.wav", ios::binary);
}
}
void SimAudio::CleanUp() {
if (outputToFile)
{
audioFile.close();
}
}