Files
CoCo3_Plus_MiSTer/verilator/gen_mem.py
Alan SterembergandClaude Opus 5.5 874f4f3083 Add Verilator simulation (ImGui + headless)
verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim
framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule,
screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette,
and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA
trace) with a minimal DriveWire server and a script to run the real FujiNet
daemon against the sim. See verilator/README.md.

- The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in
  verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809).
- sdram2.sv is simulated with its own controller logic and an SDR chip model.
- run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on
  the text screen and byte-for-byte against test-ref/ screenshots.

rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of
inside generate blocks. They are assigned outside those blocks; Quartus
accepted it, Verilator rejected spt_addr and silently split buff_wr into a
separate net. No change on the FPGA (FM-7 made the same fix).

Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
2026-10-02 07:15:44 -04:00

45 lines
1.7 KiB
Python

#!/usr/bin/env python3
"""Regenerate the $readmemh images the Verilog conversions load.
rtl/rom/coco3_char_rom.vhd -> verilator/rtl/coco3_char_rom.mem (4096 x 8)
rtl/VDAC.mif -> verilator/rtl/vdac.mem ( 256 x 16)
Run from the verilator/ directory after either source changes.
"""
import re, sys
def char_rom():
src = open('../rtl/rom/coco3_char_rom.vhd').read()
body = src[src.index('signal RAM'):src.index(');', src.index('signal RAM'))]
vals = re.findall(r'x"([0-9A-Fa-f]{2})"', body)
if len(vals) != 4096:
sys.exit(f'coco3_char_rom.vhd: expected 4096 bytes, found {len(vals)}')
with open('rtl/coco3_char_rom.mem', 'w') as f:
for i in range(0, 4096, 16):
f.write(' '.join(v.upper() for v in vals[i:i+16]) + '\n')
def vdac():
mem = [0] * 256
txt = open('../rtl/VDAC.mif').read()
txt = txt[txt.index('CONTENT BEGIN') + len('CONTENT BEGIN'):txt.index('END;')]
for line in txt.splitlines():
line = line.split('--')[0].strip().rstrip(';')
if ':' not in line:
continue
addr, data = (s.strip() for s in line.split(':', 1))
words = data.split()
if addr.startswith('['): # [lo..hi] : value
lo, hi = (int(x, 16) for x in addr[1:-1].split('..'))
for a in range(lo, hi + 1):
mem[a] = int(words[0], 16)
else:
base = int(addr, 16)
for i, w in enumerate(words):
mem[base + i] = int(w, 16)
with open('rtl/vdac.mem', 'w') as f:
for i in range(0, 256, 8):
f.write(' '.join(f'{v:04X}' for v in mem[i:i+8]) + '\n')
char_rom()
vdac()