1. Overlay support for the detection of no rom loading on power up AND misc
debugging. [done]
2. Fix video HSCREEN 4 mode which is used in some demos and rs-232 terminal
programs. [done]
3. Reworked sound output to faithfully emulate the analog muxing in the coco.
[done]
4. Routing RS-232 tx/rx lines to the SNAC port for initial serial debugging
of Fuji-Net interface. [done - untested]
142 lines
7.3 KiB
Plaintext
142 lines
7.3 KiB
Plaintext
1. Overlay support for the detection of no rom loading on power up AND misc
|
|
debugging. [done]
|
|
2. Fix video HSCREEN 4 mode which is used in some demos and rs-232 terminal
|
|
programs. [done]
|
|
3. Reworked sound output to faithfully emulate the analog muxing in the coco.
|
|
[done]
|
|
4. Routing RS-232 tx/rx lines to the SNAC port for initial serial debugging
|
|
of Fuji-Net interface. [done - untested]
|
|
|
|
|
|
To Do...
|
|
1. Add Fuji-Net port.
|
|
2. Add Speech / Music cart
|
|
3. Fix Castle of Tharoggad
|
|
|
|
|
|
|
|
|
|
1. Added support for cassette save. To use: A) You have to have a file [anyname.cas]
|
|
which is larger than needed. B) Select the file through the UI Menu 'Save
|
|
Cassette'. C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"'
|
|
E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write. The file can
|
|
now be loaded or copied. Note a dummy file of a specific size can be created in
|
|
the MiSTer SSH shell in the /media/fat/games/coco3 with the command:
|
|
'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length]
|
|
2. Fixed serial interrupt [6551] to not be functional on slot 3 [carts].
|
|
3. Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used
|
|
for logic analyzer debug. This will only occur when `define Config_Debug is
|
|
enabled in config.v.
|
|
4. Fixed MUGS of powerup issue occurring on some MiSTer units.
|
|
5. Fixed incorrect application of GIME_IRQ on legacy interrupts. Fixed race condition
|
|
on reading IRQ status vs clearing the interrupt.
|
|
6. Improved Castle of Tharoggad. App now loads but locks as the graphics animate. This
|
|
change improved mmu usage through to CARTS.
|
|
7. Builds now keep track of multiple builds in the same date. It shows as V240512-001 in
|
|
the menus. Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is
|
|
supplied in the archive to show how it works.
|
|
8. Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font -
|
|
IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format.
|
|
Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display
|
|
a clock.
|
|
9. Large improvement in the Timer function. Code closer emulates COCO3 Timer. Fixes
|
|
Sliphead cart.
|
|
10. In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for
|
|
the FDC. This saved space but introduced a bug when using multiple drives at the same
|
|
time - like a copy command. This change was removed and the copy command works again.
|
|
|
|
To Do...
|
|
1. Add Speech / Music cart
|
|
2. Fix Castle of Tharoggad
|
|
|
|
|
|
|
|
|
|
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
|
|
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
|
|
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floppy or HD
|
|
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
|
|
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
|
|
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
|
|
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
|
|
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
|
|
upon using the 'Cold Boot' menu item.
|
|
4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the
|
|
max value of 63. Specifically '>' was changed to '>=' the DTOA values.
|
|
This fixes DonPan and is verified in Diagnostics 2.0.
|
|
5. HiRES[3] is used to enable some of the higher resolution graphics modes
|
|
Gary Becker designed into CoCo3FPGA, and while these are not fully
|
|
supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt
|
|
the graphics engine. For some reason Color File II manipulates this bit
|
|
and was causing it not to work. This change requires the SG6 extensions
|
|
to be enabled to set HiRES[3]. So specifically in the Video Settings
|
|
insure CoCo3 LC is set to Yes. Color File II now works properly.
|
|
|
|
To Do...
|
|
1. Add support for cassette save.
|
|
2. Add Speech / Music cart
|
|
3. Fix Castle of Tharoggod
|
|
|
|
FYI - If you plan on playing with the build process - there is a new compile time feature
|
|
in config.v called CoCo3_Select_GIMEX_RAST. It is inactive and I suggest you leave
|
|
it as its is a upcoming change which is not ready.
|
|
|
|
|
|
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
|
|
2. Removal of 16 bit sound extentions as they overlap speach / sound cart. This is
|
|
accompanied by a rework of the sound mixing to be more correct.
|
|
3. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0
|
|
4. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
|
|
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
|
|
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
|
|
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
|
|
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
|
|
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
|
|
upon using the 'Cold Boot' menu item.
|
|
|
|
|
|
To Do...
|
|
1. Add Speech / Music cart
|
|
2. Fix Color File II
|
|
3. Fic Castle of Tharoggad
|
|
|
|
|
|
|
|
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
|
|
2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
|
|
3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to
|
|
enable artifacts. That is no longer true. For most compatibility it has be relabeled 'CoCo3 LC',
|
|
and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
|
|
For some OS9 software this must be set to 'Yes' which is the default.
|
|
4. Added 'Artifact Type' menu in 'Video Settings' menu. Settings are 'MESS', 'Simple', and 'NONE'. 'MESS'
|
|
is the default and has improved fidelity over 'Simple' which was previously implemented in connection
|
|
with SW5 [see above]. Again, the default should be used. The artifact emulation can be turned off
|
|
by setting the option to 'NONE'. The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
|
|
artifact settings.
|
|
|
|
|
|
|
|
To Do...
|
|
1. Change PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
|
|
2. Fix Color File II
|
|
3. Fic Castle of Tharoggad
|
|
|
|
|
|
|
|
CTF = Compile Time Feature...
|
|
|
|
1. Interrupt system restored to previous code - improved compadibility.
|
|
2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
|
|
3. Recoded sdc and fdc to only have one instance of the wd1773.
|
|
4. Re-added software disable in sdc [Ext 'g'].
|
|
5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
|
|
6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
|
|
7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
|
|
8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
|
|
9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
|
|
10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
|
|
11 Corrected missing begin statement in master timing loop.
|
|
12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
|
|
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
|
|
14. Updated MiSTer framework
|