1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F. 2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0. 3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floppy or HD and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0 on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup. Save your settings to cause the changes to be remembered. The Auto Run system re-arms upon using the 'Cold Boot' menu item. 4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the max value of 63. Specifically '>' was changed to '>=' the DTOA values. This fixes DonPan and is verified in Diagnostics 2.0. 5. HiRES[3] is used to enable some of the higher resolution graphics modes Gary Becker designed into CoCo3FPGA, and while these are not fully supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt the graphics engine. For some reason Color File II manipulates this bit and was causing it not to work. This change requires the SG6 extensions to be enabled to set HiRES[3]. So specifically in the Video Settings insure CoCo3 LC is set to Yes. Color File II now works properly. To Do... 1. Add support for cassette save. 2. Add Speech / Music cart 3. Fix Castle of Tharoggod FYI - If you plan on playing with the build process - there is a new compile time feature in config.v called CoCo3_Select_GIMEX_RAST. It is inactive and I suggest you leave it as its is a upcoming change which is not ready. 1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F. 2. Removal of 16 bit sound extentions as they overlap speach / sound cart. This is accompanied by a rework of the sound mixing to be more correct. 3. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0 4. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0 on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup. Save your settings to cause the changes to be remembered. The Auto Run system re-arms upon using the 'Cold Boot' menu item. To Do... 1. Add Speech / Music cart 2. Fix Color File II 3. Fic Castle of Tharoggad 1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes) 2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F 3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to enable artifacts. That is no longer true. For most compatibility it has be relabeled 'CoCo3 LC', and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode]. For some OS9 software this must be set to 'Yes' which is the default. 4. Added 'Artifact Type' menu in 'Video Settings' menu. Settings are 'MESS', 'Simple', and 'NONE'. 'MESS' is the default and has improved fidelity over 'Simple' which was previously implemented in connection with SW5 [see above]. Again, the default should be used. The artifact emulation can be turned off by setting the option to 'NONE'. The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple' artifact settings. To Do... 1. Change PIA 2 addressing to align with real CoCo3 hardware and end at FF2F. 2. Fix Color File II 3. Fic Castle of Tharoggad CTF = Compile Time Feature... 1. Interrupt system restored to previous code - improved compadibility. 2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF] 3. Recoded sdc and fdc to only have one instance of the wd1773. 4. Re-added software disable in sdc [Ext 'g']. 5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select] 6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1. 7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware. 8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF] 9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF] 10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF] 11 Corrected missing begin statement in master timing loop. 12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad 13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working 14. Updated MiSTer framework