#============================================================================ # CoCo3 Verilator simulation # # Same layout as the FM-7 and Apple-IIgs sims: sim.v stands in for CoCo3.sv, # sim/ is the shared ImGui/SDL framework, and one binary runs either windowed # or with --headless. # # make build ./obj_dir/Vemu # make run build and launch the windowed sim # make headless build and boot to BASIC headless, screenshot at the end # make test build and run the headless smoke test (run_tests.sh) # make lint elaborate the design only # make mem regenerate rtl/*.mem from the VHDL/MIF sources # make clean # # No ghdl step. The build uses the Verilog cycle-accurate 6809 (mc6809glb.v, # selected by CoCo3_CYC_ACC_6809 in rtl/config.sv), and the VHDL entities it # does instantiate -- ROMs, RAMs, the font -- are converted by hand in rtl/: # # rtl/rom/coco_rom_32K.vhd, coco_rom_8K.vhd, coco_rom_cart.vhd, # coco_rom_16.vhd, coco3_char_rom.vhd -> rtl/coco_rom.v # rtl/sram/coco_ram.vhd, coco_vid_ram_buf.vhd -> rtl/coco_sram.v # # Quartus-only pieces are replaced as well: rtl/VDAC.v (altsyncram) by # rtl/VDAC.v here, rtl/sdram/sdram2.sv by rtl/sdram2.sv here (same controller, # chip model instead of pins), and the PLL by clocks driven from sim_main. #============================================================================ V = verilator RTL = ../rtl TOP = --top-module emu # Verilator 5 demands --no-timing for the cosmetic `#` delays; 4.x rejects the # flag. Same probe as the FM-7 Makefile. VERILATOR_MAJOR := $(shell verilator --version 2>/dev/null | sed -n 's/^Verilator \([0-9][0-9]*\).*/\1/p') NO_TIMING := $(if $(filter 4,$(VERILATOR_MAJOR)),,--no-timing) # -Wno-PROCASSWIRE: coco3fpga.sv and fdc.sv declare a number of registers as # `wire` and assign them in always blocks (Build_Info, VMA, PIX_CLK_D, the $FF40 # latch, ...). Quartus accepts that and so does Verilator once the check is # waived; the RTL is left as it is. V_DEFINE = +define+SIMULATION=1 -Wno-PROCASSWIRE \ --timescale-override 1ps/1ps -Wno-TIMESCALEMOD -Wno-fatal \ $(NO_TIMING) --converge-limit 6000 \ -I$(RTL) # VCD tracing: `make clean && make TRACE=1`, then run with --vcd and a # --trace-from/--trace-until window (a 114 MHz design dumps ~1 GB a frame). ifeq ($(TRACE),1) V_DEFINE += --trace CXX_DEFINE += -DVM_TRACE_VCD=1 else CXX_DEFINE += -DVM_TRACE_VCD=0 endif UNAME_S := $(shell uname -s) ifeq ($(UNAME_S), Darwin) LIBS += -framework OpenGL -framework Cocoa -framework IOKit -framework CoreVideo `sdl2-config --libs` LIBS += -L/usr/local/lib -L/opt/local/lib -L/opt/homebrew/lib CXXFLAGS += `sdl2-config --cflags` CXXFLAGS += `sdl2-config --cflags | sed 's|include/SDL2|include/|'` CXXFLAGS += -I/usr/local/include -I/opt/local/include -I/opt/homebrew/include endif ifeq ($(UNAME_S), Linux) LIBS += -lGL -ldl `sdl2-config --libs` CXXFLAGS += `sdl2-config --cflags` endif ifeq ($(findstring MINGW,$(UNAME_S)),MINGW) LIBS += -lgdi32 -lopengl32 -limm32 `pkg-config --static --libs sdl2` CXXFLAGS += `pkg-config --cflags sdl2` endif CC_OPT = -O2 V_OPT = -O3 --x-assign fast --x-initial fast --noassert CXXFLAGS += $(CC_OPT) $(CXX_DEFINE) -I../sim/imgui -I../sim -I.. -g LDFLAGS = $(LIBS) EXE = ./obj_dir/Vemu V_SRC = \ sim.vlt \ sim.v \ rtl/sdram2.sv \ rtl/coco_rom.v \ rtl/coco_sram.v \ rtl/VDAC.v \ ../sys/hps_io.sv \ $(RTL)/coco3fpga.sv \ $(RTL)/EE_Cold_Bt.v \ $(RTL)/cassette.v \ $(RTL)/square_gen.v \ $(RTL)/AMW.v \ $(RTL)/rtc.sv \ $(RTL)/fdc.sv \ $(RTL)/wd1793.sv \ $(RTL)/sdc.sv \ $(RTL)/sdc_top.sv \ $(RTL)/Auto_Run.sv \ $(RTL)/ps2_mouse.v \ $(RTL)/coco_mem_fetch.sv \ $(RTL)/Cassette_Write.sv \ $(RTL)/cocokey.v \ $(RTL)/PS2_Key/ps2_keyboard.v \ $(RTL)/UART_6551/uart_6551.v \ $(RTL)/UART_6551/6551tx.v \ $(RTL)/UART_6551/6551rx.v \ $(RTL)/mc6809glb/mc6809glb.v \ $(RTL)/Mister_Video.v \ $(RTL)/Mister_Video_GIMEX.v C_SRC = \ sim_main.cpp dis6809.cpp serial.cpp \ sim/sim_bus.cpp sim/sim_clock.cpp sim/sim_console.cpp sim/sim_video.cpp \ sim/sim_blkdevice.cpp sim/sim_input.cpp sim/sim_audio.cpp \ sim/imgui/imgui_impl_sdl.cpp sim/imgui/imgui_impl_opengl2.cpp \ sim/imgui/imgui_draw.cpp sim/imgui/imgui_widgets.cpp sim/imgui/imgui_tables.cpp \ sim/imgui/imgui.cpp sim/imgui/ImGuiFileDialog.cpp \ sim/imgui/implot.cpp sim/imgui/implot_items.cpp VOUT = obj_dir/Vemu.cpp all: $(EXE) $(VOUT): $(V_SRC) Makefile $V -cc $(V_OPT) -LDFLAGS "$(LDFLAGS)" -exe --Mdir ./obj_dir \ $(V_DEFINE) $(TOP) -CFLAGS "$(CXXFLAGS)" $(V_SRC) $(C_SRC) $(EXE): $(VOUT) $(C_SRC) sim/*.h dis6809.h serial.h (cd obj_dir; $(MAKE) -f Vemu.mk OBJCACHE= OPT_FAST="-O2" OPT_SLOW="-O0" OPT_GLOBAL="-O2") lint: $V --lint-only $(V_DEFINE) -Wno-WIDTH $(TOP) $(V_SRC) mem: python3 gen_mem.py run: all $(EXE) headless: all $(EXE) --headless --stop-at-frame 150 --screenshot 150 test: all ./run_tests.sh clean: rm -rf obj_dir .PHONY: all lint mem run headless test clean # Disassembler self-check. Standalone -- no Verilator, no core. distest: dis6809_test.cpp dis6809.cpp dis6809.h mkdir -p obj_dir && c++ -O1 -o obj_dir/distest dis6809_test.cpp dis6809.cpp -I. && ./obj_dir/distest .PHONY: distest