# Features and implementation ## Four independently configured sockets The new Multi-Pak configuration separates **what is installed**, **which socket starts selected**, and **which media is mounted**. Each of four sockets can hold Empty, ROM file, Floppy, CoCo SDC, Sound & Speech, Orchestra90, Audio expansions, or RS232. Built-in controllers are singletons: assigning one elsewhere moves that device rather than inventing another independent controller. The combined Audio expansions entry preserves simultaneous legacy Orchestra90 and selectable SSC behavior; it is a convenience combination, not an original physical cartridge. The router follows independent guest CTS and SCS selectors, with device-qualified read data, writes and interrupts. Four ROM sockets share a 256 KiB allocation pool; a single image can use at most 128 KiB. Socket state and banking are private to each socket. Removing a ROM frees its allocation and suppresses stale autoload. An oversized/full-pool transfer reports a load error rather than overwriting a neighbor. Floppy/SDC mounted images follow their controller when it moves slots. Device changes deliberately cold-restart the guest; media selection does not. Persisted legacy settings are migrated into a marked four-slot layout. MiSTer Main's original remembered-file mechanism loads cartridge and SSC files without custom host software. Early file transfers are staged while initialization holds reset, then matched against the restored layout before the guest is released. ## Original-firmware Sound & Speech The SSC implementation includes a TMS7000-family instruction/peripheral engine for the cartridge's TMS7040 controller, the original 4 KiB controller firmware, an AY-3-8913-compatible tone/noise/envelope path, an SP0256-compatible speech sequencer/LPC path using the original 2 KiB AL2 ROM, host interface and cartridge glue. The original ROM bytes are runtime inputs, not re-created firmware or an emulator audio recording. Chip implementations are synchronous FPGA logic. Host status/data behavior, firmware command handshakes, reset/ready transitions, busy/abort/recovery, firmware instruction behavior and generated samples are covered by component/integration testing and shared Sound Lab diagnostics. Normal idle status is FF; it is not evidence of an absent card. No unsupported cartridge IRQ is invented. Original SSC is mono; its signal is mixed into both outputs alongside the legacy CoCo audio path. Orchestra90 remains stereo and can coexist through Audio expansions or distinct assigned sockets. SSC ROM validity belongs to FPGA power/configuration lifetime. A guest cold boot or reset does not discard valid runtime ROMs; real core PLL-lock loss does. Strict file length/address/loader completion checks prevent a partial load from being reported ready. The OSD shows not ready, ready or error separately. ## SSC and extended-color register ownership The inherited FPGA extended-color/video-DAC feature uses an address also occupied by SSC cartridge registers. **Sound & Expansion → Expansion** selects Extended palette or Sound & Speech. Only the selected implementation owns the shared register decode. SSC mode also requires an SSC-capable socket assignment; the menu disables the option and explains the missing assignment otherwise. The extended palette is an FPGA-specific enhancement, not a claim that an unmodified physical CoCo3 had that feature. Its original palette/video behavior is preserved. Orchestra90 does not require enabling the extended-color mode. Do not infer SSC presence merely from a loaded ROM filename; socket and expansion ownership determine whether the guest can address it. The inherited graphics extension provides 256 palette entries with 12-bit RGB values (four bits per channel) and extended graphics decode. Its VDAC programming write at FF7E conflicts with SSC; its color lookup and supported pixel-latch geometry follow `rtl/VDAC.v`, `rtl/VDAC.mif` and `rtl/Mister_Video.v`. This is preserved implementation, including source-specific low-resolution latch behavior, not a newly invented standard display mode. Use the original source/manual for register programming rather than assuming every extended mode is byte-per-pixel. ## Existing functions retained - Four WD1793-style floppy image mounts and Disk BASIC. - Two SDC image mounts accepting DSK/VHD plus the existing OS9 floppy mount rows. - ROM/cartridge loading and banked access within the documented memory pool. - Cassette CAS playback, rewind, monitoring and recording/export path. - 512K/1M/2M/16M guest memory choices and existing turbo/autorun controls. - Aspect ratios, scandoubler effects, artifact choices and CoCo3 LC option. - USB joystick emulation, swap and mouse as right joystick. - RS232/UART routing, font loading and debug/Easter Egg controls. Retained source functionality is not a claim that every optional peripheral, physical I/O route or large disk format has been tested on the development unit. See VALIDATION.md for observed coverage and remaining work.