//////////////////////////////////////////////////////////////////////////////// // Project Name: CoCo3FPGA Version 4.0 // File Name: 6551tx.v // // CoCo3 in an FPGA // // Revision: 4.0 07/10/16 //////////////////////////////////////////////////////////////////////////////// // // CPU section copyrighted by John Kent // The FDC co-processor copyrighted Daniel Wallner. // SDRAM Controller copyrighted by XESS Corp. // //////////////////////////////////////////////////////////////////////////////// // // Color Computer 3 compatible system on a chip // // Version : 4.0 // // Copyright (c) 2008 Gary Becker (gary_l_becker@yahoo.com) // // All rights reserved // // Redistribution and use in source and synthezised forms, with or without // modification, are permitted provided that the following conditions are met: // // Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // Redistributions in synthesized form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // Neither the name of the author nor the names of other contributors may // be used to endorse or promote products derived from this software without // specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, // THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR // PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // Please report bugs to the author, but before you do so, please // make sure that this is not a derivative work and that // you have the latest version of this file. // // The latest version of this file can be found at: // http://groups.yahoo.com/group/CoCo3FPGA // // File history : // // 1.0 Full Release // 2.0 Partial Release // 3.0 Full Release // 3.0.0.1 Update to fix DoD interrupt issue // 3.0.1.0 Update to fix 32/40 CoCO3 Text issue and add 2 Meg max memory // 4.0.X.X Full Release //////////////////////////////////////////////////////////////////////////////// // Gary Becker // gary_L_becker@yahoo.com //////////////////////////////////////////////////////////////////////////////// module uart51_tx( BAUD_CLK, RESET_N, TX_DATA, TX_START, TX_DONE, TX_STOP, TX_WORD, TX_PAR_DIS, TX_PARITY, CTS, TX_BUFFER ); input BAUD_CLK; input RESET_N; output TX_DATA; reg TX_DATA; input TX_START; output TX_DONE; reg TX_DONE; input TX_STOP; input [1:0] TX_WORD; input TX_PAR_DIS; input [1:0] TX_PARITY; input CTS; input [7:0] TX_BUFFER; reg [6:0] STATE; reg [2:0] BIT; wire PARITY; reg TX_START0; reg TX_START1; assign PARITY = (~TX_PARITY[1] & ((TX_BUFFER[0] ^ TX_BUFFER[1]) ^ (TX_BUFFER[2] ^ TX_BUFFER[3])) ^ (TX_BUFFER[4] ^ (TX_BUFFER[5] & (TX_WORD != 2'b00))) ^ ((TX_BUFFER[6] & (TX_WORD[1] == 1'b1)) ^ (TX_BUFFER[7] & (TX_WORD == 2'b11)))) // clear bit #8 if only 7 bits ^ ~TX_PARITY[0]; always @ (negedge BAUD_CLK or negedge RESET_N) begin if(!RESET_N) begin STATE <= 7'b0000000; TX_DATA <= 1'b1; TX_DONE <= 1'b1; BIT <= 3'b000; TX_START0 <= 1'b0; TX_START1 <= 1'b0; end else begin TX_START0 <= TX_START; TX_START1 <= TX_START0; case (STATE) 7'b0000000: begin BIT <= 3'b000; TX_DATA <= 1'b1; if(TX_START1 == 1'b1) begin TX_DONE <= 1'b0; STATE <= 7'b0000001; end end 7'b0000001: // Start bit begin TX_DATA <= 1'b0; STATE <= 7'b0000010; end 7'b0010001: begin TX_DATA <= TX_BUFFER[BIT]; STATE <= 7'b0010010; end 7'b0100000: begin BIT <= BIT + 1; if((TX_WORD == 2'b00) && (BIT != 3'b111)) begin STATE <= 7'b0010001; end else begin if((TX_WORD == 2'b01) && (BIT != 3'b110)) begin STATE <= 7'b0010001; end else begin if((TX_WORD == 2'b10) && (BIT != 3'b101)) begin STATE <= 7'b0010001; end else begin if((TX_WORD == 2'b11) && (BIT != 3'b100)) begin STATE <= 7'b0010001; end else begin if(!TX_PAR_DIS) begin STATE <= 7'b0100001; // do parity end else begin STATE <= 7'b0110001; // do stop end end end end end end // Start parity bit 7'b0100001: begin TX_DATA <= PARITY; STATE <= 7'b0100010; end // start stop 7'b0110001: begin TX_DONE <= 1'b1; TX_DATA <= 1'b1; STATE <= 7'b0110010; end // end of first stop bit-1 7'b0111111: begin if(!TX_STOP) STATE <= 7'b1001111; // go check for CTS else STATE <= 7'b1000000; end 7'b1001111: begin if(!CTS) // this is not correct for a 6551 begin STATE <= 7'b0000000; end end default: STATE <= STATE + 1; endcase end end endmodule