Author SHA1 Message Date
shodge12 da09ad34fc WIP2
Added 128x8 ram for the soc.
2024-02-26 01:03:32 -05:00
shodge12 69b2b08343 WIP Release
Just starting on Music_Sound_SOC.
Time out for work on MiSTer_Video.v...
2024-02-22 19:21:22 -05:00
shodge12 f93784660c Fix PIA2 adrs, added Auto Run
1.	Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2.	Removal of 16 bit sound extentions as they overlap speach / sound cart.  This is
	accompanied by a rework of the sound mixing to be more correct.
3.	Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0
4.	Added 'Auto Run' feature.  You must use slot 2 [SDC].  Take your floopy or HD
	and copy it to a file name of 'boot.vhd'.  This will be auto mounted to drive 0
	on the SDC.  In the menu, find a new item Auto Run:.  It can be set to No, DOS or
	AUTO.BAS.  Choosing dos causes the 'DOS' command to be executed on power up.  Setting
	the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
	Save your settings to cause the changes to be remembered.  The Auto Run system re-arms
	upon using the 'Cold Boot' menu item.

To Do...
1.	Add Speech / Music cart
2.	Fix Color File II
3.	Fic Castle of Tharoggad
2024-02-16 22:27:15 -05:00
shodge12 49a8aee74d Release 20240205
1.	For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2.	Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3.	Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6.  Formerly it was used to
    enable artifacts.  That is no longer true.  For most compatibility it has be relabeled 'CoCo3 LC',
	and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
	For some OS9 software this must be set to 'Yes' which is the default.
4.	Added 'Artifact Type' menu in 'Video Settings' menu.  Settings are 'MESS', 'Simple', and 'NONE'.  'MESS'
	is the default and has improved fidelity over 'Simple' which was previously implemented in connection
	with SW5 [see above].  Again, the default should be used.  The artifact emulation can be turned off
	by setting the option to 'NONE'.  The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
	artifact settings.
2024-02-05 21:37:20 -05:00
18 changed files with 3008 additions and 113 deletions

No files matched your search

BIN
View File
Binary file not shown.
-1
View File
@@ -318,7 +318,6 @@ set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_16.vhd
set_global_assignment -name SDC_FILE rtl/CoCo3FPGA.sdc set_global_assignment -name SDC_FILE rtl/CoCo3FPGA.sdc
set_global_assignment -name ENABLE_SIGNALTAP ON set_global_assignment -name ENABLE_SIGNALTAP ON
set_global_assignment -name USE_SIGNALTAP_FILE Vsync.stp
set_global_assignment -name SIGNALTAP_FILE Video_Explorer.stp set_global_assignment -name SIGNALTAP_FILE Video_Explorer.stp
set_global_assignment -name SIGNALTAP_FILE rom_Exploror.stp1 set_global_assignment -name SIGNALTAP_FILE rom_Exploror.stp1
set_global_assignment -name SOURCE_FILE rom_Exploror.stp1 set_global_assignment -name SOURCE_FILE rom_Exploror.stp1
+15 -11
View File
@@ -194,20 +194,20 @@ localparam CONF_STR = {
"-;", "-;",
"OCD,Multi-Pak,(Slot 2) CoCoSDC,(Slot3) ECB /Cart,(Slot 4) Disk;", "OCD,Multi-Pak,(Slot 2) CoCoSDC,(Slot3) ECB /Cart,(Slot 4) Disk;",
"H3-;", "H3-;",
"H3S0,DSK,Load Disk Drive 0;", "H3S2,DSK,Load Disk Drive 0;",
"H3S1,DSK,Load Disk Drive 1;", "H3S3,DSK,Load Disk Drive 1;",
"H3S2,DSK,Load Disk Drive 2;", "H3S4,DSK,Load Disk Drive 2;",
"H3S3,DSK,Load Disk Drive 3;", "H3S5,DSK,Load Disk Drive 3;",
"H2-;", "H2-;",
"H2F1,CCC,Load Cartridge;", "H2F1,CCC,Load Cartridge;",
"H1-;", "H1-;",
"H1S4,DSKVHD,Load SDC Drive 0;", "H1S0,DSKVHD,Load SDC Drive 0;",
"H1S5,DSKVHD,Load SDC Drive 1;", "H1S1,DSKVHD,Load SDC Drive 1;",
"H1-;", "H1-;",
"H1S0,DSK,Load OS9 Floppy /d0;", "H1S2,DSK,Load OS9 Floppy /d0;",
"H1S1,DSK,Load OS9 Floppy /d1;", "H1S3,DSK,Load OS9 Floppy /d1;",
"H1S2,DSK,Load OS9 Floppy /d3;", "H1S4,DSK,Load OS9 Floppy /d3;",
"H1S3,DSK,Load OS9 Floppy /d4;", "H1S5,DSK,Load OS9 Floppy /d4;",
"-;", "-;",
"F2,CAS,Load Cassette;", "F2,CAS,Load Cassette;",
@@ -242,6 +242,7 @@ localparam CONF_STR = {
"OO,Force Turbo,No,Yes;", "OO,Force Turbo,No,Yes;",
"o02,Turbo Speed,CoCo Ctrl, 0.89 Mhz,1.78 Mhz,2.86 Mhz, 3.58 Mhz,7.16 Mhz,9.54 Mhz;", "o02,Turbo Speed,CoCo Ctrl, 0.89 Mhz,1.78 Mhz,2.86 Mhz, 3.58 Mhz,7.16 Mhz,9.54 Mhz;",
"OPR,Memory Size,512K,1M,2M,16M;", "OPR,Memory Size,512K,1M,2M,16M;",
"o89,Auto Run,No,DOS,AUTO.BAS;",
"-;", "-;",
"RM,Cold Boot;", "RM,Cold Boot;",
"R0,Reset;", "R0,Reset;",
@@ -260,7 +261,7 @@ localparam CONF_STR = {
// 0123456789ABCDEFGHIJKLMNOPQRSTUV 0123456789ABCDEFGHIJKLMNOPQRSTUV // 0123456789ABCDEFGHIJKLMNOPQRSTUV 0123456789ABCDEFGHIJKLMNOPQRSTUV
// //
// R OOOO OOR OO TOOOOOOROOOOOO ooo // R OOOO OOR OO TOOOOOOROOOOOO ooo oo oo
//F FF //F FF
//S SSSSSS //S SSSSSS
@@ -582,6 +583,8 @@ coco3fpga coco3 (
.Mem_Size(Mem_Size), .Mem_Size(Mem_Size),
.AUTO_MODE(Auto_Mode),
.UART_TXD(UART_TXD), .UART_TXD(UART_TXD),
.UART_RXD(UART_RXD), .UART_RXD(UART_RXD),
.UART_RTS(UART_RTS), .UART_RTS(UART_RTS),
@@ -597,6 +600,7 @@ wire [5:0] cocosound;
wire [2:0] turbo_speed = status[34:32]; wire [2:0] turbo_speed = status[34:32];
wire [2:0] assigned_turbo_speed; wire [2:0] assigned_turbo_speed;
wire [1:0] art = status[38:37]; wire [1:0] art = status[38:37];
wire [1:0] Auto_Mode = status[41:40];
wire AMW_ACK; wire AMW_ACK;
+23 -2
View File
@@ -1,3 +1,23 @@
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Removal of 16 bit sound extentions as they overlap speach / sound cart. This is
accompanied by a rework of the sound mixing to be more correct.
3. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0
4. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
To Do...
1. Add Speech / Music cart
2. Fix Color File II
3. Fic Castle of Tharoggad
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes) 1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F 2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to 3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to
@@ -13,8 +33,9 @@
To Do... To Do...
1. Fix Color File II 1. Change PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Fic Castle of Tharoggad 2. Fix Color File II
3. Fic Castle of Tharoggad
+6
View File
@@ -23,10 +23,16 @@ set_global_assignment -name VERILOG_FILE rtl/config.v
set_global_assignment -name SYSTEMVERILOG_FILE rtl/fdc.sv set_global_assignment -name SYSTEMVERILOG_FILE rtl/fdc.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc.sv set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc_top.sv set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc_top.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/Auto_Run.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/ps2_mouse.v set_global_assignment -name SYSTEMVERILOG_FILE rtl/ps2_mouse.v
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdram/sdram2.sv set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdram/sdram2.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/wd1793.sv set_global_assignment -name SYSTEMVERILOG_FILE rtl/wd1793.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/music_speech.sv
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sp0256.vhd
set_global_assignment -name SYSTEMVERILOG_FILE rtl/ym2149_audio.vhd
set_global_assignment -name SYSTEMVERILOG_FILE rtl/Music_Speech_SOC.sv
set_global_assignment -name SYSTEMVERILOG_FILE CoCo3.sv set_global_assignment -name SYSTEMVERILOG_FILE CoCo3.sv
set_global_assignment -name VHDL_FILE rtl/sram/CoCo_ram_6116.vhd
set_global_assignment -name VHDL_FILE rtl/sram/coco_vid_ram_buf.vhd set_global_assignment -name VHDL_FILE rtl/sram/coco_vid_ram_buf.vhd
set_global_assignment -name SYSTEMVERILOG_FILE rtl/coco_mem_fetch.sv set_global_assignment -name SYSTEMVERILOG_FILE rtl/coco_mem_fetch.sv
set_global_assignment -name VERILOG_FILE rtl/EE_Cold_Bt.v set_global_assignment -name VERILOG_FILE rtl/EE_Cold_Bt.v
Binary file not shown.
+264
View File
@@ -0,0 +1,264 @@
////////////////////////////////////////////////////////////////////////////////
// Project Name: CoCo3FPGA Version 5.x.x
// File Name: Auto_Run.sv
//
// CoCo3 in an FPGA
//
////////////////////////////////////////////////////////////////////////////////
//
////////////////////////////////////////////////////////////////////////////////
//
// Color Computer 3 compatible system on a chip
//
//
// Copyright (c) 2008 Gary Becker ([email protected])
//
// All rights reserved
//
// Redistribution and use in source and synthezised forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// Redistributions in synthesized form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// Neither the name of the author nor the names of other contributors may
// be used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Please report bugs to the author, but before you do so, please
// make sure that this is not a derivative work and that
// you have the latest version of this file.
//
//
////////////////////////////////////////////////////////////////////////////////
// Stan Hodge
//
// Auto_Run by Stan Hodge 02/16/24
////////////////////////////////////////////////////////////////////////////////
module Auto_Run(
input RESET_N,
input CLK,
input CLK_1_78,
input [1:0] MPI_SCS, // slot id
input [1:0] MODE, // from MISTer subsystem 00=NONE, 01=DOS<RET>, 10=RUN"AUTO<RET>
input AMW_ACK, // from AMW subsystem - Cold Boot setup finished
input [72:0] KEY_IN, // Keystroke array
output [72:0] KEY_OUT // Modified Keystroke array
);
// Programs
// MODE = 01
// D O S <CR>
wire [7:0] DOS_KEYFILE[0:3] = '{8'd4, 8'd15, 8'd19, 8'd48};
// MODE = 10
// R U N <S> 2 A U T O <CR>
wire [7:0] RUN_KEYFILE[0:9] = '{8'd18, 8'd21, 8'd14, 8'd55, 8'd34, 8'd1, 8'd21, 8'd20, 8'd15, 8'd48};
localparam PRESS_KEY = 1'b1;
localparam RELEASE_KEY = 1'b0;
reg [3:0] index;
reg shift;
reg [7:0] char;
reg run; // 1=running
reg key_up_down;
reg timer_19_d;
// 300ms [600ms is aprox 1024000]
reg [19:0] timer;
// timer[19] changes state every 524288 counts, ~ 0.294 seconds.
reg timer_enable; // 1=run, 0=stop and clear
localparam st_beg0 = 4'd0;
localparam st_beg1 = 4'd1;
localparam st_beg2 = 4'd2;
localparam st_start = 4'd3;
localparam st_1 = 4'd4;
localparam st_2 = 4'd5;
localparam st_3 = 4'd6;
reg [3:0] state;
reg first_time = 1'b1;
/////////////////////////////////////////////////////////////
// Timer
always @ (negedge CLK or negedge RESET_N)
begin
if(!RESET_N)
begin
timer <= 20'b00000000000000000000;
end
else
begin
if (CLK_1_78)
begin
if (timer_enable)
timer <= timer + 1'b1;
else
timer <= 20'b00000000000000000000;
end
end
end
/////////////////////////////////////////////////////////////
// Output
always @(*)
begin
KEY_OUT <= KEY_IN;
if (run)
begin
if (shift)
begin
KEY_OUT[55] <= key_up_down;
KEY_OUT[char] <= key_up_down;
end
else
begin
KEY_OUT[char] <= key_up_down;
end
end
end
/////////////////////////////////////////////////////////////
// Main State Mach
always @ (negedge CLK or negedge RESET_N)
begin
if(!RESET_N)
begin
state <= st_beg0;
shift <= 1'b0;
index <= 4'd0;
run <= 1'b0;
timer_enable <= 1'b0;
key_up_down <= RELEASE_KEY;
timer_19_d <= 1'b0;
end
else
begin
if (AMW_ACK)
first_time <= 1'b1;
timer_19_d <= timer[19];
case(state)
st_beg0:
begin
timer_enable <= 1'b1;
if (!timer[19] && timer_19_d)
state <= st_beg1;
end
st_beg1:
begin
if (!timer[19] && timer_19_d)
state <= st_beg2;
end
st_beg2:
begin
if (!timer[19] && timer_19_d)
begin
state <= st_start;
timer_enable <= 1'b0;
end
end
st_start:
begin
if (first_time && (MPI_SCS == 2'b01))
begin
if (MODE == 2'b01) //DOS
begin
if (DOS_KEYFILE[index] == 8'd55)
shift <= 1'b1;
char <= DOS_KEYFILE[index];
run <= 1'b1;
state <= st_1;
end
else if (MODE == 2'b10) //RUN"AUTO
begin
if (RUN_KEYFILE[index] == 8'd55)
shift <= 1'b1;
char <= RUN_KEYFILE[index];
run <= 1'b1;
state <= st_1;
end
end
end
st_1:
begin
index <= index + 1'b1;
if (shift && (char == 8'd55)) // read next char
state <= st_start;
else
begin
timer_enable <= 1'b1;
key_up_down <= PRESS_KEY;
state <= st_2;
end
end
st_2:
begin
if (timer[18] == 1'b1) // 300ms time passed
begin
key_up_down <= RELEASE_KEY;
state <= st_3;
end
end
st_3:
begin
if (timer[18] == 1'b0) // 300ms time passed
begin
shift <= 1'b0;
timer_enable <= 1'b0;
if (char == 7'd48) // we are done
begin
first_time <= 1'b0;
run <= 1'b0;
end
state <= st_start;
end
end
default:;
endcase
end
end
endmodule
+112
View File
@@ -0,0 +1,112 @@
////////////////////////////////////////////////////////////////////////////////
// Project Name: CoCo3FPGA Version 5.x.x
// File Name: Music_Speech.sv
//
// CoCo3 in an FPGA
//
////////////////////////////////////////////////////////////////////////////////
//
////////////////////////////////////////////////////////////////////////////////
//
// Color Computer 3 compatible system on a chip
//
//
// Copyright (c) 2008 Gary Becker ([email protected])
//
// All rights reserved
//
// Redistribution and use in source and synthezised forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// Redistributions in synthesized form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// Neither the name of the author nor the names of other contributors may
// be used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Please report bugs to the author, but before you do so, please
// make sure that this is not a derivative work and that
// you have the latest version of this file.
//
//
////////////////////////////////////////////////////////////////////////////////
// Stan Hodge
//
// Music_Speech.sv by Stan Hodge 02/16/24
////////////////////////////////////////////////////////////////////////////////
module Music_Speech_SOC(
input RESET_N,
input CLKIN,
input CLK_1_78,
input INT1_N,
input INT3_N,
output [7:0] PORT_A,
output [7:0] PORT_B,
output [7:0] PORT_C,
output [7:0] PORT_D_OUT,
input [7:0] PORT_D_IN
);
//////////////////////////////////////////////////////////////////////////////////
// 09 Processor
wire VMA, RW_N, HALT, CPU_IRQ_N, CPU_FIRQ_N, NMI_09;
wire [15:0] ADDRESS;
wire [7:0] DATA_IN, DATA_OUT;
// CPU section copyrighted by John Kent
cpu09 GLBCPU09(
.clk(CLKIN),
.rst(!RESET_N),
.vma(VMA),
.addr(ADDRESS),
.rw(RW_N),
.data_in(DATA_IN),
.data_out(DATA_OUT),
.halt(HALT),
.hold(hold | ~cpu_ena), // ???
.irq(!CPU_IRQ_N),
.firq(!CPU_FIRQ_N),
.nmi(NMI_09)
);
assign DATA_IN = (ADDRESS[15:7] == 8'b00000000) ? ram_data_out:
/////////////////////////////////////////////////////////////////////////////
// SRAM Chip
wire [7:0] ram_data_out;
wire sram_write_enable;
COCO_SRAM_128x8 CoCo3_SRAM_128x8(
.CLK(CLK),
.ENA(sram_write_enable),
.ADDR(ADDRESS[6:0]),
.R_N(RW_N),
.DATA_O(ram_data_out),
.DATA_I(DATA_OUT)
);
endmodule
+66
View File
@@ -0,0 +1,66 @@
//============================================================================
// Audio compressor (signed samples)
//
// Copyright (C) 2018 Sorgelig
//
// This program is free software; you can redistribute it and/or modify it
// under the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 of the License, or (at your option)
// any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
// more details.
//
// You should have received a copy of the GNU General Public License along
// with this program; if not, write to the Free Software Foundation, Inc.,
// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
//============================================================================
module compressor
(
input clk,
input [9:0] din,
output [8:0] dout
);
always @(posedge clk) dout <= {din[9], din[9] ? ~tbl[~din[8:0]] : tbl[din[8:0]]};
wire [7:0] tbl[0:511] =
'{
8'h00, 8'h01, 8'h02, 8'h03, 8'h04, 8'h06, 8'h07, 8'h08, 8'h09, 8'h0B, 8'h0C, 8'h0D, 8'h0E, 8'h0F, 8'h11, 8'h12,
8'h13, 8'h14, 8'h16, 8'h17, 8'h18, 8'h19, 8'h1B, 8'h1C, 8'h1D, 8'h1E, 8'h1F, 8'h21, 8'h22, 8'h23, 8'h24, 8'h25,
8'h27, 8'h28, 8'h29, 8'h2A, 8'h2C, 8'h2D, 8'h2E, 8'h2F, 8'h30, 8'h32, 8'h33, 8'h34, 8'h35, 8'h36, 8'h37, 8'h39,
8'h3A, 8'h3B, 8'h3C, 8'h3D, 8'h3F, 8'h40, 8'h41, 8'h42, 8'h43, 8'h44, 8'h46, 8'h47, 8'h48, 8'h49, 8'h4A, 8'h4B,
8'h4D, 8'h4E, 8'h4F, 8'h50, 8'h51, 8'h52, 8'h53, 8'h55, 8'h56, 8'h57, 8'h58, 8'h59, 8'h5A, 8'h5B, 8'h5C, 8'h5E,
8'h5F, 8'h60, 8'h61, 8'h62, 8'h63, 8'h64, 8'h65, 8'h66, 8'h67, 8'h69, 8'h6A, 8'h6B, 8'h6C, 8'h6D, 8'h6E, 8'h6F,
8'h70, 8'h71, 8'h72, 8'h73, 8'h74, 8'h75, 8'h76, 8'h77, 8'h78, 8'h79, 8'h7A, 8'h7B, 8'h7C, 8'h7D, 8'h7E, 8'h7F,
8'h80, 8'h81, 8'h82, 8'h83, 8'h84, 8'h85, 8'h86, 8'h87, 8'h88, 8'h89, 8'h8A, 8'h8B, 8'h8C, 8'h8D, 8'h8E, 8'h8F,
8'h90, 8'h91, 8'h92, 8'h93, 8'h94, 8'h95, 8'h96, 8'h96, 8'h97, 8'h98, 8'h99, 8'h9A, 8'h9B, 8'h9C, 8'h9D, 8'h9E,
8'h9E, 8'h9F, 8'hA0, 8'hA1, 8'hA2, 8'hA3, 8'hA4, 8'hA4, 8'hA5, 8'hA6, 8'hA7, 8'hA8, 8'hA9, 8'hA9, 8'hAA, 8'hAB,
8'hAC, 8'hAD, 8'hAD, 8'hAE, 8'hAF, 8'hB0, 8'hB1, 8'hB1, 8'hB2, 8'hB3, 8'hB4, 8'hB4, 8'hB5, 8'hB6, 8'hB7, 8'hB7,
8'hB8, 8'hB9, 8'hB9, 8'hBA, 8'hBB, 8'hBC, 8'hBC, 8'hBD, 8'hBE, 8'hBE, 8'hBF, 8'hC0, 8'hC0, 8'hC1, 8'hC2, 8'hC2,
8'hC3, 8'hC4, 8'hC4, 8'hC5, 8'hC6, 8'hC6, 8'hC7, 8'hC8, 8'hC8, 8'hC9, 8'hC9, 8'hCA, 8'hCB, 8'hCB, 8'hCC, 8'hCC,
8'hCD, 8'hCE, 8'hCE, 8'hCF, 8'hCF, 8'hD0, 8'hD0, 8'hD1, 8'hD2, 8'hD2, 8'hD3, 8'hD3, 8'hD4, 8'hD4, 8'hD5, 8'hD5,
8'hD6, 8'hD6, 8'hD7, 8'hD7, 8'hD8, 8'hD8, 8'hD9, 8'hD9, 8'hDA, 8'hDA, 8'hDB, 8'hDB, 8'hDC, 8'hDC, 8'hDD, 8'hDD,
8'hDE, 8'hDE, 8'hDE, 8'hDF, 8'hDF, 8'hE0, 8'hE0, 8'hE1, 8'hE1, 8'hE1, 8'hE2, 8'hE2, 8'hE3, 8'hE3, 8'hE3, 8'hE4,
8'hE4, 8'hE5, 8'hE5, 8'hE5, 8'hE6, 8'hE6, 8'hE6, 8'hE7, 8'hE7, 8'hE7, 8'hE8, 8'hE8, 8'hE9, 8'hE9, 8'hE9, 8'hEA,
8'hEA, 8'hEA, 8'hEA, 8'hEB, 8'hEB, 8'hEB, 8'hEC, 8'hEC, 8'hEC, 8'hED, 8'hED, 8'hED, 8'hEE, 8'hEE, 8'hEE, 8'hEE,
8'hEF, 8'hEF, 8'hEF, 8'hEF, 8'hF0, 8'hF0, 8'hF0, 8'hF0, 8'hF1, 8'hF1, 8'hF1, 8'hF1, 8'hF2, 8'hF2, 8'hF2, 8'hF2,
8'hF3, 8'hF3, 8'hF3, 8'hF3, 8'hF3, 8'hF4, 8'hF4, 8'hF4, 8'hF4, 8'hF4, 8'hF5, 8'hF5, 8'hF5, 8'hF5, 8'hF5, 8'hF6,
8'hF6, 8'hF6, 8'hF6, 8'hF6, 8'hF6, 8'hF7, 8'hF7, 8'hF7, 8'hF7, 8'hF7, 8'hF7, 8'hF8, 8'hF8, 8'hF8, 8'hF8, 8'hF8,
8'hF8, 8'hF8, 8'hF9, 8'hF9, 8'hF9, 8'hF9, 8'hF9, 8'hF9, 8'hF9, 8'hF9, 8'hFA, 8'hFA, 8'hFA, 8'hFA, 8'hFA, 8'hFA,
8'hFA, 8'hFA, 8'hFA, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFB, 8'hFC, 8'hFC,
8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFC, 8'hFD, 8'hFD, 8'hFD,
8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD, 8'hFD,
8'hFD, 8'hFD, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE,
8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE,
8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE,
8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE,
8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE,
8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE,
8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFE, 8'hFF
};
endmodule
+444
View File
@@ -0,0 +1,444 @@
---------------------------------------------------------------------------------
-- sp0256 by Dar ([email protected]) (14/04/2018)
-- http://darfpga.blogspot.fr
---------------------------------------------------------------------------------
-- Educational use only
-- Do not redistribute synthetized file with roms
-- Do not redistribute roms whatever the form
-- Use at your own risk
---------------------------------------------------------------------------------
--
-- SP0256-al2 prom decoding scheme and speech synthesis algorithm are from :
--
-- Copyright Joseph Zbiciak, all rights reserved.
-- Copyright tim lindner, all rights reserved.
--
-- See C source code and license in sp0256.c from MAME source
--
-- VHDL code is by Dar.
--
---------------------------------------------------------------------------------
--
-- One allophone is made of N parts (called here after lines), each part has a
-- 16 bytes descriptor. One descriptor (for one part) contains one repeat value
-- one amplitude value, one period value and 2x6 filtering coefficients.
--
-- for line_cnt from 0 to nb_line-1 (part)
-- for line_rpt from 0 to line_rpt-1 (repeat)
-- for per_cnt from 0 to line_per-1 (period)
-- produce 1 sample
--
-- One sample is the output of the 6 stages filter. Each filter stage is fed by
-- the output of the previous stage, the first stage is fed by the source sample
--
-- when line_per != 0 source sample is set to amplitude value only once at the
-- begin of each repeat (per_cnt==0) then source sample is set to 0
--
-- when line_per == 0 source sample is set to amplitude value only at the begin
-- of each repeat (per_cnt==0) then source sample sign is toggled (+/-) when then
-- random noise generator lsb equal 1. In that case actual line_per is set to 64
--
--
-- Sound sample frequency is 10kHz. I make a 25 stages linear state machine
-- running at 250kHz that produce one sound sample per cycle.
--
-- As long as one allophones is available the state machine runs permanently and
-- there is zero latency between allophones.
--
-- During one (each) cycle the state machine:
--
-- - fetch new allophone or go on with current one if not finished
-- - get allophone first line descriptor address from rom entry table
-- - get allophone nb_line from rom entry table and jump to first line address
-- - get allophone line_rpt from rom current line descriptor
-- - get allophone amplitude from rom current line descriptor
-- manage source amplitude, reset filter if needed
-- - get allophone line_per from rom current line descriptor
-- - address filter coefficients F/B within rom current line descriptor,
-- feed filter input, update filter state with computation output
-- - rescale last filter stage output to audio output
-- - manage per_cnt, rpt_cnt, line_cnt and random noise generator
--
-- Filter computation:
--
-- Filter coefficients F or B index is get from rom current line descriptor
-- (address managed by state machine), value is converted thru coeff_array
-- table. Coefficient index has a sign bit to be managed:
--
-- if index sign bit = 0, filter coefficient <= -coeff_array(index)
-- if index sign bit = 1, filter coefficient <= coeff_array(-index)
--
-- During one state machine cycle each filter is updated once.
-- One filter update require two state machine steps:
--
-- step 1
-- sum_in1 <= filter input
-- sum_in2 <= filter coefficient F * filter state z1 / 256
-- sum_out <= sum_in1 + sum_in2
-- step 2
-- sum_in1 <= sum_out
-- sum_in2 <= filter coefficient B * filter state z2 / 512
-- sum_out <= sum_in1 + sum_in2
-- filter state z1 <= sum_in1 + sum_in2
-- filter state z2 <= filter state z1
--
-- (sum_out will be limited to -32768/+32767)
--
-- Audio output scaling to 10bits unsigned:
--
-- what :
-- Last filter output is limited to -8192/+8191
-- Then divided by 16 => -512/+511
-- Then offset by 512 => 0/1023
--
-- how:
-- if X > 8191, Y <= 1023
-- elsif X < -8192, Y <= 0
-- else Y <= (X/16)+512
--
---------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.ALL;
use ieee.std_logic_unsigned.all;
use ieee.numeric_std.all;
entity sp0256 is
port
(
clock : in std_logic;
ce : in std_logic;
reset : in std_logic;
input_rdy : out std_logic;
allophone : in std_logic_vector(5 downto 0);
trig_allophone : in std_logic;
audio_out : out signed(9 downto 0)
);
end sp0256;
architecture syn of sp0256 is
signal rom_addr : std_logic_vector(11 downto 0);
signal rom_do : std_logic_vector( 7 downto 0);
signal stage : integer range 0 to 24; -- stage counter 0-24;
signal allo_entry : std_logic_vector(7 downto 0);
signal allo_addr_lsb, allo_addr_msb : std_logic_vector(7 downto 0);
signal allo_nb_line : std_logic_vector(7 downto 0);
signal line_rpt, line_per : std_logic_vector(7 downto 0);
signal line_amp_lsb, line_amp_msb : std_logic_vector(7 downto 0);
signal amp, filter, coeff : signed(15 downto 0);
signal sum_in2 : signed(31 downto 0);
signal sum_in1,sum_out_ul : signed(15 downto 0);
signal sum_out : signed(15 downto 0);
signal divider : std_logic;
signal audio : signed(9 downto 0);
signal audio_int : signed(8 downto 0);
signal is_noise : std_logic;
signal noise_rng : std_logic_vector(15 downto 0) := X"0001";
signal f0_z1,f0_z2 : signed(15 downto 0);
signal f1_z1,f1_z2 : signed(15 downto 0);
signal f2_z1,f2_z2 : signed(15 downto 0);
signal f3_z1,f3_z2 : signed(15 downto 0);
signal f4_z1,f4_z2 : signed(15 downto 0);
signal f5_z1,f5_z2 : signed(15 downto 0);
signal input_rdy_in : std_logic;
signal sound_on : std_logic := '0';
signal trig_allophone_r : std_logic;
signal line_cnt, rpt_cnt, per_cnt : std_logic_vector(7 downto 0);
signal coeff_idx : std_logic_vector(6 downto 0);
type coeff_array_t is array(0 to 127) of integer range 0 to 511;
constant coeff_array : coeff_array_t := (
0, 9, 17, 25, 33, 41, 49, 57,
65, 73, 81, 89, 97, 105, 113, 121,
129, 137, 145, 153, 161, 169, 177, 185,
193, 201, 209, 217, 225, 233, 241, 249,
257, 265, 273, 281, 289, 297, 301, 305,
309, 313, 317, 321, 325, 329, 333, 337,
341, 345, 349, 353, 357, 361, 365, 369,
373, 377, 381, 385, 389, 393, 397, 401,
405, 409, 413, 417, 421, 425, 427, 429,
431, 433, 435, 437, 439, 441, 443, 445,
447, 449, 451, 453, 455, 457, 459, 461,
463, 465, 467, 469, 471, 473, 475, 477,
479, 481, 482, 483, 484, 485, 486, 487,
488, 489, 490, 491, 492, 493, 494, 495,
496, 497, 498, 499, 500, 501, 502, 503,
504, 505, 506, 507, 508, 509, 510, 511);
component compressor is port
(
clk : in std_logic;
din : in signed(9 downto 0);
dout : out signed(8 downto 0)
);
end component;
begin
input_rdy <= input_rdy_in;
-- stage counter : Fs=250k/25 = 10kHz
process (clock, reset)
begin
if reset='1' then
stage <= 0;
else
if rising_edge(clock) then
if ce = '1' then
if stage >= 24 then
stage <= 0;
else
stage <= stage + 1;
end if;
end if;
end if;
end if;
end process;
process (clock, reset)
begin
if reset='1' then
input_rdy_in <= '1';
sound_on <= '0';
noise_rng <= X"0001";
else
if rising_edge(clock) then if ce = '1' then
trig_allophone_r <= trig_allophone;
if trig_allophone = '1' and trig_allophone_r = '0' then
input_rdy_in <= '0';
end if;
if sound_on = '0' then
if stage = 0 and input_rdy_in = '0' then
allo_entry <= allophone*"11";
rom_addr <= X"0"&(allophone*"11");
line_cnt <= (others => '0');
rpt_cnt <= (others => '0');
per_cnt <= (others => '0');
sound_on <= '1';
input_rdy_in <= '1';
end if;
else -- sound is on
case stage is
when 0 =>
rom_addr <= X"0"&allo_entry;
when 1 =>
--allo_addr_msb <= rom_do;
rom_addr <= rom_addr + '1';
when 2 =>
allo_addr_lsb <= rom_do;
rom_addr <= rom_addr + '1';
when 3 =>
allo_nb_line <= rom_do - '1';
rom_addr <= (allo_addr_lsb +line_cnt) & X"0";
when 4 =>
line_rpt <= rom_do - '1';
rom_addr <= rom_addr + '1';
when 5 =>
line_amp_msb <= rom_do;
rom_addr <= rom_addr + '1';
when 6 =>
if per_cnt = X"00" then
amp <= signed(line_amp_msb & rom_do);
else
if is_noise = '1' then
if noise_rng(0) = '1' then
amp <= -amp;
end if;
else
amp <= (others => '0');
end if;
end if;
if per_cnt = X"00"then
f0_z1 <= (others => '0'); f0_z2 <= (others => '0');
f1_z1 <= (others => '0'); f1_z2 <= (others => '0');
f2_z1 <= (others => '0'); f2_z2 <= (others => '0');
f3_z1 <= (others => '0'); f3_z2 <= (others => '0');
f4_z1 <= (others => '0'); f4_z2 <= (others => '0');
f5_z1 <= (others => '0'); f5_z2 <= (others => '0');
end if;
rom_addr <= rom_addr + '1';
when 7 =>
if rom_do = X"00" then
line_per <= X"40";
is_noise <= '1';
else
line_per <= rom_do - '1';
is_noise <= '0';
end if;
sum_in1 <= amp;
filter <= f0_z1;
divider <= '0';
rom_addr <= rom_addr + '1';
when 8 =>
sum_in1 <= sum_out;
filter <= f0_z2;
divider <= '1';
rom_addr <= rom_addr + '1';
when 9 =>
f0_z1 <= sum_out;
f0_z2 <= f0_z1;
sum_in1 <= sum_out;
filter <= f1_z1;
divider <= '0';
rom_addr <= rom_addr + '1';
when 10 =>
sum_in1 <= sum_out;
filter <= f1_z2;
divider <= '1';
rom_addr <= rom_addr + '1';
when 11 =>
f1_z1 <= sum_out;
f1_z2 <= f1_z1;
sum_in1 <= sum_out;
filter <= f2_z1;
divider <= '0';
rom_addr <= rom_addr + '1';
when 12 =>
sum_in1 <= sum_out;
filter <= f2_z2;
divider <= '1';
rom_addr <= rom_addr + '1';
when 13 =>
f2_z1 <= sum_out;
f2_z2 <= f2_z1;
sum_in1 <= sum_out;
filter <= f3_z1;
divider <= '0';
rom_addr <= rom_addr + '1';
when 14 =>
sum_in1 <= sum_out;
filter <= f3_z2;
divider <= '1';
rom_addr <= rom_addr + '1';
when 15 =>
f3_z1 <= sum_out;
f3_z2 <= f3_z1;
sum_in1 <= sum_out;
filter <= f4_z1;
divider <= '0';
rom_addr <= rom_addr + '1';
when 16 =>
sum_in1 <= sum_out;
filter <= f4_z2;
divider <= '1';
rom_addr <= rom_addr + '1';
when 17 =>
f4_z1 <= sum_out;
f4_z2 <= f4_z1;
sum_in1 <= sum_out;
filter <= f5_z1;
divider <= '0';
rom_addr <= rom_addr + '1';
when 18 =>
sum_in1 <= sum_out;
filter <= f5_z2;
divider <= '1';
rom_addr <= rom_addr + '1';
when 19 =>
f5_z1 <= sum_out;
f5_z2 <= f5_z1;
if sum_out > 510*16 then
audio <= to_signed(511,10);
elsif sum_out < -511*16 then
audio <= to_signed(-512,10);
else
audio <= sum_out(13 downto 4);
end if;
when 20 =>
if per_cnt >= line_per then
per_cnt <= (others => '0');
if rpt_cnt >= line_rpt then
rpt_cnt <= (others => '0');
if line_cnt >= allo_nb_line then
line_cnt <= (others => '0');
sound_on <= '0';
else
line_cnt <= line_cnt + '1';
end if;
is_noise <= '0';
else
rpt_cnt <= rpt_cnt + '1';
end if;
else
per_cnt <= per_cnt + '1';
end if;
if noise_rng(0) = '1' then
noise_rng <= ('0' & noise_rng(15 downto 1) ) xor X"4001";
else
noise_rng <= '0' & noise_rng(15 downto 1);
end if;
when others => null;
end case;
end if;
end if; end if;
end if;
end process;
compr: compressor
port map
(
clk => clock,
din => audio,
dout => audio_int
);
audio_out <= audio_int(8) & audio_int;
-- filter computation
coeff_idx <= rom_do(6 downto 0) when rom_do(7)='0' else
not(rom_do(6 downto 0)) + '1';
coeff <= -to_signed(coeff_array(to_integer(unsigned(coeff_idx))),16) when rom_do(7)='0' else
to_signed(coeff_array(to_integer(unsigned(coeff_idx))),16);
sum_in2 <= (filter * coeff) / 256 when divider = '0' else
(filter * coeff) / 512 ;
sum_out_ul <= sum_in1 + sum_in2(15 downto 0);
sum_out <= to_signed( 32767,16) when sum_out_ul > 32767 else
to_signed(-32768,16) when sum_out_ul < -32768 else
sum_out_ul;
-- sp0256-al2 prom (decoded)
sp0256_al2_decoded : entity work.sp0256_al2_decoded
port map(
clk => clock,
addr => rom_addr,
data => rom_do
);
end syn;
+373
View File
@@ -0,0 +1,373 @@
---------------------------------------------------------------------------------
-- sp0256 by Dar ([email protected]) (14/04/2018)
-- http://darfpga.blogspot.fr
---------------------------------------------------------------------------------
-- Educational use only
-- Do not redistribute synthetized file with roms
-- Do not redistribute roms whatever the form
-- Use at your own risk
---------------------------------------------------------------------------------
--
-- SP0256-al2 prom decoding scheme and speech synthesis algorithm are from :
--
-- Copyright Joseph Zbiciak, all rights reserved.
-- Copyright tim lindner, all rights reserved.
--
-- See C source code and license in sp0256.c from MAME source
--
-- VHDL code is by Dar.
--
---------------------------------------------------------------------------------
-- Original sp0256 prom is bit compressed. I used sp0256.c from MAME to produce
-- an uncompressed and more easy format to be used in FPGA.
--
-- Original prom is 2K, uncompressed prom is 4k.
--
-- Uncompressed format is :
--
-- 64 entries table of 3 bytes/entry : adr_msb, adr_lsb, nb_line (nb parts)
-- (1 entry per allophone)
--
-- Each allophone is made of #nb_line parts
--
-- Each part is described by 16 bytes (one line) :
--
-- rpt : repeat nb
-- amp_msb, amp_lsb : amplitude
-- per : periode (number of sample to be produced for each rpt)
-- F0|B0|F1|B1|F2|B2|F3|B3|F4|B4|F5|B5 : filtering coefficients
--
---------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all,ieee.numeric_std.all;
entity sp0256_al2_decoded is
port (
clk : in std_logic;
addr : in std_logic_vector(11 downto 0);
data : out std_logic_vector(7 downto 0)
);
end entity;
architecture prom of sp0256_al2_decoded is
type rom is array(0 to 4095) of std_logic_vector(7 downto 0);
signal rom_data: rom := (
-- adr_msb|adr_lsb|nb_line
X"00",X"0C",X"01", -- #00 : 000-002
X"00",X"0D",X"01", -- #01 : 003-005
X"00",X"0E",X"01", -- #02 : 006-008
X"00",X"0F",X"01", -- #03 : 009-00B
X"00",X"10",X"01", -- #04 : 00C-00E
X"00",X"11",X"0A", -- #05 : 00F-011
X"00",X"1B",X"0A", -- #06 : 012-014
X"00",X"25",X"01", -- #07 : 015-017
X"00",X"26",X"03", -- #08 : 018-01A
X"00",X"29",X"03", -- #09 : 01B-01D
X"00",X"2C",X"03", -- #0A : 01E-020
X"00",X"2F",X"03", -- #0B : 021-023
X"00",X"32",X"01", -- #0C : 024-026
X"00",X"33",X"04", -- #0D : 027-029
X"00",X"37",X"06", -- #0E : 02A-02C
X"00",X"3D",X"01", -- #0F : 02D-02F
X"00",X"3E",X"04", -- #10 : 030-032
X"00",X"42",X"03", -- #11 : 033-035
X"00",X"45",X"02", -- #12 : 036-038
X"00",X"47",X"06", -- #13 : 039-03B
X"00",X"4D",X"08", -- #14 : 03C-03E
X"00",X"55",X"02", -- #15 : 03F-041
X"00",X"57",X"03", -- #16 : 042-044
X"00",X"5A",X"01", -- #17 : 045-047
X"00",X"5B",X"03", -- #18 : 048-04A
X"00",X"5E",X"06", -- #19 : 04B-04D
X"00",X"64",X"01", -- #1A : 04E-050
X"00",X"65",X"03", -- #1B : 051-053
X"00",X"68",X"02", -- #1C : 054-056
X"00",X"6A",X"01", -- #1D : 057-059
X"00",X"6B",X"01", -- #1E : 05A-05C
X"00",X"6C",X"03", -- #1F : 05D-05F
X"00",X"6F",X"05", -- #20 : 060-062
X"00",X"74",X"03", -- #21 : 063-065
X"00",X"77",X"03", -- #22 : 066-068
X"00",X"7A",X"03", -- #23 : 069-06B
X"00",X"7D",X"03", -- #24 : 06C-06E
X"00",X"80",X"04", -- #25 : 06F-071
X"00",X"84",X"02", -- #26 : 072-074
X"00",X"86",X"03", -- #27 : 075-077
X"00",X"89",X"01", -- #28 : 078-07A
X"00",X"8A",X"03", -- #29 : 07B-07D
X"00",X"8D",X"04", -- #2A : 07E-080
X"00",X"91",X"03", -- #2B : 081-083
X"00",X"94",X"04", -- #2C : 084-086
X"00",X"98",X"03", -- #2D : 087-089
X"00",X"9B",X"03", -- #2E : 08A-08C
X"00",X"9E",X"0D", -- #2F : 08D-08F
X"00",X"AB",X"04", -- #30 : 090-092
X"00",X"AF",X"04", -- #31 : 093-095
X"00",X"B3",X"03", -- #32 : 096-098
X"00",X"B6",X"09", -- #33 : 099-09B
X"00",X"BF",X"0A", -- #34 : 09C-09E
X"00",X"C9",X"06", -- #35 : 09F-0A1
X"00",X"CF",X"02", -- #36 : 0A2-0A4
X"00",X"D1",X"01", -- #37 : 0A5-0A7
X"00",X"D2",X"06", -- #38 : 0A8-0AA
X"00",X"D8",X"02", -- #39 : 0AB-0AD
X"00",X"DA",X"09", -- #3A : 0AE-0B0
X"00",X"E3",X"09", -- #3B : 0B1-0B3
X"00",X"EC",X"08", -- #3C : 0B4-0B6
X"00",X"F4",X"03", -- #3D : 0B7-0B9
X"00",X"F7",X"03", -- #3E : 0BA-0BC
X"00",X"FA",X"03", -- #3F : 0BD-0BF
-- rpt|amp_msb mp_lsb|per|F0|B0|F1|B1|F2|B2|F3|B3|F4|B4|F5|B5
X"01",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #00.0 : 0C0-0CF
X"04",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #01.0 : 0D0-0DF
X"07",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #02.0 : 0E0-0EF
X"0F",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #03.0 : 0F0-0FF
X"1F",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #04.0 : 100-10F
X"03",X"01",X"40",X"5B",X"A0",X"60",X"B8",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.0 : 110-11F
X"03",X"00",X"C0",X"5B",X"A0",X"60",X"B0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.1 : 120-12F
X"01",X"00",X"50",X"5B",X"A0",X"60",X"A8",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.2 : 130-13F
X"03",X"00",X"80",X"5B",X"A0",X"60",X"B0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.3 : 140-14F
X"01",X"00",X"70",X"5B",X"A0",X"60",X"B0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.4 : 150-15F
X"04",X"00",X"A0",X"5B",X"A0",X"60",X"B8",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.5 : 160-16F
X"02",X"01",X"C0",X"5B",X"A8",X"60",X"C0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.6 : 170-17F
X"04",X"02",X"80",X"5B",X"A8",X"60",X"D0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.7 : 180-18F
X"02",X"02",X"80",X"5B",X"A8",X"60",X"E0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.8 : 190-19F
X"09",X"01",X"00",X"5B",X"A0",X"60",X"E8",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #05.9 : 1A0-1AF
X"01",X"03",X"00",X"5B",X"B0",X"70",X"C8",X"70",X"F8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.0 : 1B0-1BF
X"01",X"02",X"80",X"5B",X"C8",X"70",X"B0",X"70",X"F8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.1 : 1C0-1CF
X"02",X"03",X"00",X"5B",X"C8",X"70",X"B0",X"70",X"F8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.2 : 1D0-1DF
X"02",X"02",X"80",X"5B",X"B0",X"70",X"C8",X"70",X"F8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.3 : 1E0-1EF
X"02",X"02",X"00",X"5B",X"C8",X"70",X"F8",X"70",X"B8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.4 : 1F0-1FF
X"02",X"02",X"80",X"5B",X"B0",X"70",X"D0",X"70",X"F8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.5 : 200-20F
X"03",X"03",X"80",X"5B",X"B0",X"70",X"F8",X"70",X"E0",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.6 : 210-21F
X"01",X"03",X"00",X"5B",X"A8",X"70",X"E0",X"70",X"F8",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.7 : 220-22F
X"03",X"02",X"80",X"5B",X"A0",X"70",X"E8",X"70",X"00",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.8 : 230-23F
X"02",X"01",X"00",X"5B",X"A0",X"70",X"F0",X"70",X"00",X"60",X"18",X"50",X"3C",X"44",X"00",X"00", -- #06.9 : 240-24F
X"06",X"06",X"00",X"5B",X"00",X"50",X"28",X"50",X"40",X"50",X"F8",X"10",X"E8",X"58",X"AA",X"64", -- #07.0 : 250-25F
X"04",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #08.0 : 260-26F
X"03",X"00",X"28",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"38",X"40",X"FC",X"04",X"CB",X"68", -- #08.1 : 270-27F
X"05",X"00",X"20",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"18",X"20",X"40",X"C5",X"62", -- #08.2 : 280-28F
X"0D",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #09.0 : 290-29F
X"04",X"00",X"14",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"28",X"40",X"F4",X"2C",X"BF",X"3B", -- #09.1 : 2A0-2AF
X"06",X"00",X"20",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"28",X"50",X"F8",X"44",X"CF",X"3A", -- #09.2 : 2B0-2BF
X"04",X"00",X"50",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"28",X"20",X"18",X"42",X"FA",X"30", -- #0A.0 : 2C0-2CF
X"04",X"01",X"C0",X"5B",X"18",X"60",X"30",X"50",X"38",X"20",X"00",X"10",X"00",X"60",X"E6",X"38", -- #0A.1 : 2D0-2DF
X"04",X"01",X"40",X"5B",X"18",X"50",X"28",X"40",X"40",X"30",X"FC",X"68",X"E8",X"52",X"DD",X"16", -- #0A.2 : 2E0-2EF
X"07",X"00",X"38",X"5B",X"00",X"30",X"18",X"20",X"38",X"40",X"FC",X"60",X"E0",X"2A",X"A1",X"54", -- #0B.0 : 2F0-2FF
X"03",X"00",X"50",X"5B",X"08",X"30",X"20",X"30",X"20",X"10",X"FC",X"68",X"E8",X"1C",X"A2",X"50", -- #0B.1 : 300-30F
X"09",X"00",X"60",X"5B",X"08",X"30",X"20",X"40",X"20",X"10",X"FC",X"68",X"E0",X"24",X"9B",X"5B", -- #0B.2 : 310-31F
X"05",X"06",X"00",X"5B",X"00",X"50",X"10",X"20",X"30",X"50",X"E8",X"60",X"34",X"1E",X"A0",X"6E", -- #0C.0 : 320-32F
X"05",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #0D.0 : 330-33F
X"03",X"00",X"A0",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"34",X"28",X"1C",X"4E",X"F4",X"21", -- #0D.1 : 340-34F
X"04",X"00",X"50",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"30",X"20",X"1C",X"44",X"EA",X"53", -- #0D.2 : 350-35F
X"03",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"24",X"18",X"1C",X"46",X"E7",X"5A", -- #0D.3 : 360-36F
X"05",X"00",X"1C",X"5B",X"98",X"60",X"C0",X"60",X"E0",X"50",X"0C",X"40",X"20",X"3C",X"32",X"2B", -- #0E.0 : 370-37F
X"03",X"00",X"50",X"5B",X"98",X"60",X"C0",X"60",X"E8",X"50",X"0C",X"40",X"20",X"3C",X"32",X"2B", -- #0E.1 : 380-38F
X"01",X"00",X"C0",X"5B",X"98",X"60",X"C0",X"60",X"E8",X"50",X"0C",X"40",X"20",X"3C",X"32",X"2B", -- #0E.2 : 390-39F
X"02",X"02",X"80",X"5B",X"A0",X"60",X"C0",X"60",X"F0",X"50",X"0C",X"40",X"20",X"3C",X"32",X"2B", -- #0E.3 : 3A0-3AF
X"01",X"01",X"C0",X"5B",X"A0",X"60",X"B8",X"60",X"F0",X"50",X"0C",X"40",X"20",X"3C",X"32",X"2B", -- #0E.4 : 3B0-3BF
X"02",X"02",X"00",X"5B",X"A0",X"60",X"B8",X"60",X"F0",X"50",X"0C",X"40",X"20",X"3C",X"32",X"2B", -- #0E.5 : 3C0-3CF
X"06",X"06",X"00",X"5B",X"F0",X"50",X"18",X"20",X"28",X"60",X"D0",X"60",X"28",X"18",X"A8",X"61", -- #0F.0 : 3D0-3DF
X"06",X"00",X"A0",X"5B",X"F0",X"50",X"C0",X"30",X"E0",X"20",X"00",X"10",X"20",X"44",X"00",X"00", -- #10.0 : 3E0-3EF
X"05",X"00",X"C0",X"5B",X"F0",X"50",X"C0",X"30",X"E0",X"20",X"00",X"10",X"20",X"44",X"00",X"00", -- #10.1 : 3F0-3FF
X"05",X"00",X"E0",X"5B",X"F0",X"50",X"E0",X"30",X"C8",X"20",X"00",X"10",X"20",X"44",X"00",X"00", -- #10.2 : 400-40F
X"04",X"01",X"40",X"5B",X"F0",X"50",X"E0",X"30",X"C8",X"20",X"00",X"10",X"20",X"44",X"00",X"00", -- #10.3 : 410-41F
X"06",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #11.0 : 420-42F
X"01",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"40",X"48",X"10",X"40",X"DF",X"3F", -- #11.1 : 430-43F
X"05",X"00",X"28",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"24",X"18",X"28",X"40",X"E8",X"3F", -- #11.2 : 440-44F
X"0C",X"00",X"A0",X"5B",X"08",X"30",X"18",X"30",X"38",X"40",X"EC",X"30",X"D4",X"2E",X"CB",X"20", -- #12.0 : 450-45F
X"03",X"02",X"80",X"5B",X"00",X"60",X"18",X"50",X"38",X"50",X"F4",X"08",X"DC",X"5E",X"A1",X"5C", -- #12.1 : 460-46F
X"03",X"06",X"00",X"5B",X"08",X"00",X"28",X"40",X"38",X"40",X"04",X"60",X"F0",X"66",X"A1",X"5A", -- #13.0 : 470-47F
X"03",X"06",X"00",X"5B",X"28",X"40",X"38",X"40",X"08",X"00",X"04",X"50",X"F4",X"62",X"A4",X"57", -- #13.1 : 480-48F
X"02",X"06",X"00",X"5B",X"08",X"10",X"28",X"50",X"38",X"40",X"04",X"48",X"F4",X"64",X"9A",X"62", -- #13.2 : 490-49F
X"03",X"06",X"00",X"5B",X"08",X"20",X"28",X"50",X"38",X"40",X"04",X"38",X"F8",X"60",X"96",X"66", -- #13.3 : 4A0-4AF
X"04",X"04",X"00",X"5B",X"08",X"30",X"28",X"50",X"38",X"50",X"FC",X"20",X"F8",X"62",X"92",X"6E", -- #13.4 : 4B0-4BF
X"04",X"01",X"40",X"5B",X"08",X"40",X"28",X"40",X"38",X"40",X"F8",X"60",X"F4",X"0C",X"90",X"71", -- #13.5 : 4C0-4CF
X"03",X"03",X"00",X"5B",X"A0",X"70",X"E8",X"60",X"00",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.0 : 4D0-4DF
X"01",X"03",X"00",X"5B",X"A0",X"70",X"F0",X"60",X"00",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.1 : 4E0-4EF
X"03",X"02",X"80",X"5B",X"A0",X"70",X"F0",X"60",X"00",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.2 : 4F0-4FF
X"01",X"01",X"C0",X"5B",X"98",X"70",X"F8",X"60",X"F8",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.3 : 500-50F
X"05",X"01",X"C0",X"5B",X"98",X"70",X"F8",X"60",X"00",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.4 : 510-51F
X"01",X"01",X"C0",X"5B",X"98",X"70",X"F8",X"60",X"00",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.5 : 520-52F
X"06",X"00",X"A0",X"5B",X"90",X"70",X"F8",X"60",X"00",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.6 : 530-53F
X"02",X"00",X"70",X"5B",X"90",X"70",X"F8",X"60",X"F8",X"20",X"04",X"30",X"28",X"52",X"00",X"00", -- #14.7 : 540-54F
X"03",X"02",X"80",X"5B",X"90",X"70",X"E0",X"70",X"00",X"60",X"10",X"10",X"1C",X"56",X"3A",X"49", -- #15.0 : 550-55F
X"02",X"02",X"00",X"5B",X"98",X"70",X"E0",X"70",X"00",X"60",X"10",X"10",X"1C",X"56",X"3A",X"49", -- #15.1 : 560-56F
X"03",X"05",X"00",X"5B",X"98",X"60",X"F0",X"60",X"D8",X"60",X"1C",X"58",X"24",X"4E",X"39",X"2C", -- #16.0 : 570-57F
X"02",X"05",X"00",X"5B",X"D0",X"60",X"F0",X"60",X"A0",X"60",X"1C",X"58",X"24",X"4E",X"39",X"2C", -- #16.1 : 580-58F
X"02",X"04",X"00",X"5B",X"F0",X"60",X"C8",X"60",X"A0",X"60",X"1C",X"58",X"24",X"4E",X"39",X"2C", -- #16.2 : 590-59F
X"08",X"04",X"00",X"5B",X"20",X"50",X"18",X"20",X"40",X"30",X"F8",X"60",X"C0",X"60",X"B2",X"5A", -- #17.0 : 5A0-5AF
X"03",X"05",X"00",X"5B",X"C8",X"60",X"B8",X"60",X"F8",X"60",X"14",X"28",X"1C",X"36",X"44",X"41", -- #18.0 : 5B0-5BF
X"02",X"05",X"00",X"5B",X"C8",X"60",X"B8",X"60",X"F8",X"60",X"14",X"28",X"1C",X"36",X"44",X"41", -- #18.1 : 5C0-5CF
X"02",X"05",X"00",X"5B",X"B8",X"60",X"C8",X"60",X"F8",X"60",X"14",X"28",X"1C",X"36",X"44",X"41", -- #18.2 : 5D0-5DF
X"03",X"01",X"C0",X"5B",X"10",X"50",X"28",X"40",X"30",X"30",X"08",X"30",X"F0",X"64",X"8E",X"70", -- #19.0 : 5E0-5EF
X"02",X"01",X"80",X"5B",X"10",X"50",X"28",X"50",X"38",X"30",X"04",X"28",X"F4",X"5E",X"8C",X"76", -- #19.1 : 5F0-5FF
X"04",X"02",X"80",X"5B",X"08",X"30",X"28",X"40",X"30",X"20",X"08",X"40",X"F4",X"5C",X"90",X"70", -- #19.2 : 600-60F
X"01",X"04",X"00",X"5B",X"10",X"30",X"20",X"50",X"38",X"40",X"00",X"38",X"F0",X"5A",X"95",X"69", -- #19.3 : 610-61F
X"03",X"07",X"00",X"5B",X"20",X"40",X"28",X"40",X"18",X"10",X"00",X"48",X"F0",X"60",X"98",X"69", -- #19.4 : 620-62F
X"01",X"06",X"00",X"5B",X"18",X"30",X"28",X"40",X"20",X"10",X"00",X"48",X"F0",X"5E",X"9C",X"68", -- #19.5 : 630-63F
X"09",X"03",X"00",X"5B",X"F8",X"40",X"20",X"50",X"30",X"50",X"F0",X"20",X"DC",X"4C",X"AE",X"66", -- #1A.0 : 640-64F
X"06",X"00",X"1C",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"24",X"28",X"08",X"4E",X"EB",X"0C", -- #1B.0 : 650-65F
X"06",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"34",X"38",X"0C",X"3E",X"F1",X"1A", -- #1B.1 : 660-66F
X"02",X"00",X"14",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"30",X"E8",X"F2",X"03",X"3F", -- #1B.2 : 670-67F
X"03",X"00",X"04",X"5B",X"F8",X"30",X"18",X"40",X"40",X"30",X"E4",X"20",X"18",X"04",X"88",X"76", -- #1C.0 : 680-68F
X"01",X"03",X"00",X"5B",X"20",X"50",X"18",X"10",X"30",X"40",X"F8",X"78",X"E0",X"74",X"98",X"6C", -- #1C.1 : 690-69F
X"14",X"00",X"28",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"30",X"30",X"10",X"24",X"E5",X"3B", -- #1D.0 : 6A0-6AF
X"08",X"02",X"80",X"5B",X"F8",X"70",X"20",X"50",X"28",X"50",X"C0",X"68",X"18",X"06",X"A4",X"5E", -- #1E.0 : 6B0-6BF
X"08",X"02",X"80",X"5B",X"F0",X"60",X"18",X"60",X"20",X"40",X"D8",X"60",X"20",X"0C",X"9D",X"61", -- #1F.0 : 6C0-6CF
X"04",X"03",X"00",X"5B",X"18",X"50",X"20",X"50",X"38",X"30",X"F0",X"60",X"D0",X"66",X"A6",X"53", -- #1F.1 : 6D0-6DF
X"07",X"02",X"00",X"5B",X"18",X"60",X"28",X"50",X"40",X"40",X"F0",X"60",X"C8",X"62",X"9D",X"61", -- #1F.2 : 6E0-6EF
X"08",X"01",X"C0",X"5B",X"B8",X"60",X"D0",X"60",X"F8",X"50",X"0C",X"20",X"20",X"44",X"00",X"00", -- #20.0 : 6F0-6FF
X"05",X"01",X"00",X"5B",X"B0",X"60",X"C8",X"60",X"F8",X"50",X"0C",X"20",X"20",X"44",X"00",X"00", -- #20.1 : 700-70F
X"04",X"00",X"A0",X"5B",X"B0",X"60",X"C0",X"60",X"F8",X"50",X"0C",X"20",X"20",X"44",X"00",X"00", -- #20.2 : 710-71F
X"04",X"00",X"80",X"5B",X"A8",X"60",X"C0",X"60",X"00",X"50",X"0C",X"20",X"20",X"44",X"00",X"00", -- #20.3 : 720-72F
X"07",X"00",X"28",X"5B",X"A0",X"60",X"B8",X"60",X"00",X"50",X"0C",X"20",X"20",X"44",X"00",X"00", -- #20.4 : 730-73F
X"04",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #21.0 : 740-74F
X"03",X"00",X"38",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"28",X"20",X"14",X"32",X"E7",X"23", -- #21.1 : 750-75F
X"03",X"06",X"00",X"5B",X"18",X"50",X"20",X"50",X"40",X"30",X"F8",X"60",X"E4",X"72",X"9D",X"5D", -- #21.2 : 760-76F
X"08",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #22.0 : 770-77F
X"05",X"00",X"38",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"30",X"48",X"F4",X"42",X"EA",X"2A", -- #22.1 : 780-78F
X"03",X"01",X"40",X"5B",X"20",X"30",X"30",X"50",X"18",X"10",X"F8",X"68",X"E8",X"58",X"9C",X"68", -- #22.2 : 790-79F
X"06",X"00",X"20",X"5B",X"08",X"30",X"28",X"50",X"50",X"40",X"F0",X"48",X"C8",X"68",X"A8",X"47", -- #23.0 : 7A0-7AF
X"06",X"00",X"E0",X"5B",X"10",X"40",X"28",X"40",X"50",X"50",X"F0",X"40",X"D0",X"1A",X"DE",X"3A", -- #23.1 : 7B0-7BF
X"02",X"01",X"40",X"5B",X"F0",X"60",X"18",X"40",X"20",X"40",X"D0",X"68",X"2C",X"18",X"C7",X"25", -- #23.2 : 7C0-7CF
X"04",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #24.0 : 7D0-7DF
X"03",X"00",X"20",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"14",X"30",X"FC",X"F0",X"FB",X"41", -- #24.1 : 7E0-7EF
X"03",X"03",X"80",X"5B",X"10",X"40",X"20",X"60",X"38",X"30",X"F8",X"30",X"F4",X"5E",X"A1",X"5C", -- #24.2 : 7F0-7FF
X"06",X"00",X"10",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"1C",X"50",X"0C",X"0E",X"FB",X"5C", -- #25.0 : 800-80F
X"03",X"00",X"60",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"24",X"18",X"18",X"42",X"FA",X"56", -- #25.1 : 810-81F
X"12",X"00",X"60",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"18",X"18",X"4A",X"FC",X"5B", -- #25.2 : 820-82F
X"04",X"00",X"50",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"24",X"18",X"10",X"2E",X"F8",X"4C", -- #25.3 : 830-83F
X"07",X"01",X"40",X"5B",X"C0",X"30",X"E0",X"40",X"F8",X"60",X"14",X"58",X"24",X"48",X"00",X"00", -- #26.0 : 840-84F
X"0B",X"00",X"80",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"42",X"FE",X"3F", -- #26.1 : 850-85F
X"02",X"00",X"38",X"5B",X"08",X"40",X"20",X"30",X"38",X"30",X"DC",X"48",X"BC",X"58",X"A4",X"54", -- #27.0 : 860-86F
X"03",X"00",X"60",X"5B",X"D0",X"60",X"10",X"70",X"20",X"30",X"BC",X"60",X"1C",X"08",X"A1",X"5D", -- #27.1 : 870-87F
X"04",X"00",X"A0",X"5B",X"D0",X"50",X"10",X"60",X"18",X"50",X"BC",X"60",X"20",X"0E",X"A3",X"5C", -- #27.2 : 880-88F
X"11",X"00",X"38",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"28",X"38",X"04",X"28",X"E3",X"27", -- #28.0 : 890-89F
X"12",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #29.0 : 8A0-8AF
X"01",X"00",X"38",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"34",X"30",X"04",X"12",X"DE",X"56", -- #29.1 : 8B0-8BF
X"02",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"2C",X"28",X"F4",X"1E",X"DC",X"49", -- #29.2 : 8C0-8CF
X"07",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #2A.0 : 8D0-8DF
X"01",X"00",X"A0",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"30",X"38",X"0C",X"62",X"E2",X"37", -- #2A.1 : 8E0-8EF
X"01",X"00",X"1C",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"2C",X"20",X"10",X"36",X"F9",X"44", -- #2A.2 : 8F0-8FF
X"09",X"00",X"50",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"2C",X"28",X"0C",X"44",X"E7",X"1B", -- #2A.3 : 900-90F
X"06",X"04",X"00",X"5B",X"20",X"50",X"40",X"60",X"58",X"50",X"00",X"58",X"DC",X"54",X"A7",X"4D", -- #2B.0 : 910-91F
X"09",X"00",X"60",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"44",X"58",X"EC",X"00",X"21",X"30", -- #2B.1 : 920-92F
X"04",X"05",X"00",X"5B",X"20",X"50",X"40",X"50",X"48",X"40",X"00",X"40",X"DC",X"60",X"B9",X"37", -- #2B.2 : 930-93F
X"05",X"03",X"80",X"5B",X"D8",X"40",X"B8",X"40",X"F8",X"40",X"04",X"58",X"2C",X"3C",X"55",X"5A", -- #2C.0 : 940-94F
X"03",X"02",X"00",X"5B",X"F0",X"40",X"B0",X"40",X"D8",X"40",X"04",X"58",X"2C",X"3C",X"55",X"5A", -- #2C.1 : 950-95F
X"06",X"01",X"C0",X"5B",X"B0",X"40",X"F0",X"40",X"D8",X"40",X"04",X"58",X"2C",X"3C",X"55",X"5A", -- #2C.2 : 960-96F
X"08",X"01",X"40",X"5B",X"F0",X"40",X"B0",X"40",X"D0",X"40",X"04",X"58",X"2C",X"3C",X"55",X"5A", -- #2C.3 : 970-97F
X"03",X"00",X"C0",X"5B",X"98",X"60",X"C8",X"60",X"08",X"40",X"18",X"30",X"28",X"44",X"2E",X"25", -- #2D.0 : 980-98F
X"03",X"02",X"80",X"5B",X"A0",X"60",X"C8",X"60",X"08",X"40",X"18",X"30",X"28",X"44",X"2E",X"25", -- #2D.1 : 990-99F
X"03",X"02",X"00",X"5B",X"A0",X"60",X"C0",X"60",X"00",X"40",X"18",X"30",X"28",X"44",X"2E",X"25", -- #2D.2 : 9A0-9AF
X"05",X"00",X"28",X"5B",X"F8",X"20",X"18",X"40",X"28",X"30",X"C0",X"38",X"10",X"F8",X"A0",X"5A", -- #2E.0 : 9B0-9BF
X"05",X"00",X"38",X"5B",X"08",X"30",X"20",X"60",X"38",X"40",X"FC",X"08",X"B0",X"50",X"9E",X"5F", -- #2E.1 : 9C0-9CF
X"06",X"00",X"50",X"5B",X"00",X"50",X"18",X"60",X"20",X"50",X"A8",X"70",X"14",X"02",X"93",X"72", -- #2E.2 : 9D0-9DF
X"03",X"02",X"80",X"5B",X"A0",X"60",X"E8",X"60",X"F8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.0 : 9E0-9EF
X"02",X"02",X"80",X"5B",X"A0",X"60",X"E8",X"60",X"F8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.1 : 9F0-9FF
X"02",X"01",X"C0",X"5B",X"A0",X"60",X"E8",X"60",X"F0",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.2 : A00-A0F
X"02",X"02",X"80",X"5B",X"A0",X"60",X"E0",X"60",X"F0",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.3 : A10-A1F
X"02",X"03",X"00",X"5B",X"A8",X"60",X"E0",X"60",X"F0",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.4 : A20-A2F
X"02",X"02",X"80",X"5B",X"A8",X"60",X"D8",X"60",X"E8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.5 : A30-A3F
X"03",X"02",X"00",X"5B",X"A8",X"60",X"D8",X"60",X"E8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.6 : A40-A4F
X"01",X"01",X"C0",X"5B",X"A8",X"60",X"D8",X"60",X"E8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.7 : A50-A5F
X"03",X"00",X"E0",X"5B",X"A8",X"60",X"D0",X"60",X"E0",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.8 : A60-A6F
X"01",X"00",X"80",X"5B",X"A0",X"60",X"D0",X"60",X"E0",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.9 : A70-A7F
X"02",X"00",X"C0",X"5B",X"A8",X"60",X"D0",X"60",X"E8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.A : A80-A8F
X"01",X"00",X"70",X"5B",X"A8",X"60",X"D0",X"60",X"E8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.B : A90-A9F
X"03",X"00",X"50",X"5B",X"A8",X"60",X"D8",X"60",X"E8",X"60",X"00",X"10",X"1C",X"52",X"42",X"59", -- #2F.C : AA0-AAF
X"06",X"00",X"0C",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"20",X"FC",X"1C",X"D2",X"28", -- #30.0 : AB0-ABF
X"0B",X"00",X"0C",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"24",X"38",X"04",X"18",X"B4",X"55", -- #30.1 : AC0-ACF
X"02",X"00",X"C0",X"5B",X"F8",X"40",X"30",X"70",X"20",X"20",X"C4",X"38",X"10",X"FC",X"A3",X"5D", -- #30.2 : AD0-ADF
X"02",X"01",X"40",X"5B",X"F8",X"60",X"28",X"50",X"28",X"50",X"B0",X"68",X"1C",X"06",X"A3",X"58", -- #30.3 : AE0-AEF
X"03",X"01",X"C0",X"5B",X"10",X"50",X"28",X"40",X"30",X"30",X"08",X"30",X"F0",X"64",X"8E",X"70", -- #31.0 : AF0-AFF
X"02",X"01",X"80",X"5B",X"10",X"50",X"28",X"50",X"38",X"30",X"04",X"28",X"F4",X"5E",X"8C",X"76", -- #31.1 : B00-B0F
X"04",X"02",X"80",X"5B",X"08",X"30",X"28",X"40",X"30",X"20",X"08",X"40",X"F4",X"5C",X"90",X"70", -- #31.2 : B10-B1F
X"01",X"04",X"00",X"5B",X"10",X"30",X"20",X"50",X"38",X"40",X"00",X"38",X"F0",X"5A",X"95",X"69", -- #31.3 : B20-B2F
X"05",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #32.0 : B30-B3F
X"05",X"00",X"14",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"28",X"40",X"08",X"4E",X"E4",X"19", -- #32.1 : B40-B4F
X"0D",X"00",X"50",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"34",X"50",X"10",X"66",X"F6",X"49", -- #32.2 : B50-B5F
X"01",X"02",X"80",X"5B",X"18",X"40",X"20",X"40",X"30",X"20",X"E4",X"60",X"CC",X"68",X"A5",X"5F", -- #33.0 : B60-B6F
X"02",X"02",X"80",X"5B",X"18",X"40",X"20",X"40",X"28",X"10",X"E4",X"58",X"D0",X"60",X"A5",X"5F", -- #33.1 : B70-B7F
X"01",X"02",X"80",X"5B",X"E0",X"60",X"18",X"40",X"20",X"40",X"D0",X"60",X"24",X"12",X"A8",X"5B", -- #33.2 : B80-B8F
X"01",X"02",X"00",X"5B",X"E0",X"60",X"18",X"50",X"28",X"40",X"D0",X"60",X"20",X"0A",X"A3",X"63", -- #33.3 : B90-B9F
X"01",X"01",X"C0",X"5B",X"E0",X"60",X"18",X"60",X"28",X"40",X"D0",X"68",X"20",X"0A",X"A5",X"61", -- #33.4 : BA0-BAF
X"02",X"02",X"00",X"5B",X"E0",X"60",X"18",X"50",X"28",X"40",X"D0",X"60",X"24",X"12",X"A2",X"69", -- #33.5 : BB0-BBF
X"01",X"01",X"40",X"5B",X"E0",X"60",X"18",X"60",X"28",X"40",X"D4",X"68",X"1C",X"0A",X"A0",X"6E", -- #33.6 : BC0-BCF
X"02",X"00",X"E0",X"5B",X"18",X"60",X"20",X"20",X"20",X"10",X"E0",X"60",X"D4",X"68",X"A0",X"6E", -- #33.7 : BD0-BDF
X"01",X"01",X"00",X"5B",X"18",X"60",X"18",X"20",X"30",X"20",X"E4",X"60",X"D4",X"6A",X"A3",X"63", -- #33.8 : BE0-BEF
X"02",X"02",X"80",X"5B",X"18",X"40",X"20",X"40",X"30",X"20",X"E4",X"60",X"CC",X"68",X"A5",X"5F", -- #34.0 : BF0-BFF
X"02",X"02",X"80",X"5B",X"18",X"40",X"20",X"40",X"28",X"10",X"E4",X"58",X"D0",X"60",X"A5",X"5F", -- #34.1 : C00-C0F
X"02",X"02",X"00",X"5B",X"E0",X"60",X"18",X"40",X"28",X"40",X"D0",X"60",X"24",X"10",X"A9",X"59", -- #34.2 : C10-C1F
X"02",X"02",X"00",X"5B",X"E0",X"60",X"18",X"40",X"20",X"40",X"D0",X"60",X"24",X"12",X"A8",X"5B", -- #34.3 : C20-C2F
X"02",X"01",X"C0",X"5B",X"E0",X"60",X"18",X"50",X"28",X"40",X"D0",X"60",X"20",X"0A",X"A3",X"63", -- #34.4 : C30-C3F
X"02",X"01",X"C0",X"5B",X"E0",X"60",X"18",X"60",X"28",X"40",X"D0",X"68",X"20",X"0A",X"A5",X"61", -- #34.5 : C40-C4F
X"02",X"01",X"C0",X"5B",X"E0",X"60",X"18",X"50",X"28",X"40",X"D0",X"60",X"24",X"12",X"A2",X"69", -- #34.6 : C50-C5F
X"03",X"01",X"40",X"5B",X"E0",X"60",X"18",X"60",X"28",X"40",X"D4",X"68",X"1C",X"0A",X"A0",X"6E", -- #34.7 : C60-C6F
X"03",X"00",X"C0",X"5B",X"18",X"60",X"20",X"20",X"20",X"10",X"E0",X"60",X"D4",X"68",X"A0",X"6E", -- #34.8 : C70-C7F
X"03",X"00",X"E0",X"5B",X"18",X"60",X"18",X"20",X"30",X"20",X"E4",X"60",X"D4",X"6A",X"A3",X"63", -- #34.9 : C80-C8F
X"03",X"02",X"80",X"5B",X"A8",X"60",X"C0",X"60",X"F8",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #35.0 : C90-C9F
X"03",X"02",X"00",X"5B",X"A8",X"60",X"C0",X"60",X"00",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #35.1 : CA0-CAF
X"01",X"01",X"C0",X"5B",X"A8",X"60",X"C0",X"60",X"00",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #35.2 : CB0-CBF
X"05",X"00",X"C0",X"5B",X"A0",X"60",X"B8",X"60",X"00",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #35.3 : CC0-CCF
X"01",X"00",X"C0",X"5B",X"A0",X"60",X"B8",X"60",X"00",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #35.4 : CD0-CDF
X"06",X"00",X"70",X"5B",X"A0",X"60",X"B8",X"60",X"00",X"60",X"40",X"60",X"24",X"60",X"00",X"00", -- #35.5 : CE0-CEF
X"11",X"00",X"A0",X"5B",X"08",X"30",X"18",X"30",X"38",X"40",X"EC",X"30",X"D4",X"2E",X"CB",X"20", -- #36.0 : CF0-CFF
X"03",X"02",X"80",X"5B",X"00",X"60",X"18",X"50",X"38",X"50",X"F4",X"08",X"DC",X"5E",X"A1",X"5C", -- #36.1 : D00-D0F
X"0A",X"00",X"70",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"48",X"40",X"20",X"38",X"E3",X"29", -- #37.0 : D10-D1F
X"04",X"00",X"A0",X"5B",X"00",X"30",X"18",X"20",X"38",X"40",X"FC",X"60",X"E0",X"2A",X"A1",X"54", -- #38.0 : D20-D2F
X"02",X"00",X"C0",X"5B",X"08",X"30",X"20",X"30",X"20",X"10",X"FC",X"68",X"E8",X"1C",X"A2",X"50", -- #38.1 : D30-D3F
X"02",X"00",X"C0",X"5B",X"08",X"30",X"20",X"40",X"20",X"10",X"FC",X"68",X"E0",X"24",X"9B",X"5B", -- #38.2 : D40-D4F
X"03",X"06",X"00",X"5B",X"10",X"40",X"18",X"40",X"30",X"30",X"F8",X"68",X"DC",X"62",X"A8",X"50", -- #38.3 : D50-D5F
X"01",X"06",X"00",X"5B",X"10",X"20",X"18",X"40",X"30",X"40",X"F8",X"68",X"D4",X"6E",X"AC",X"55", -- #38.4 : D60-D6F
X"03",X"06",X"00",X"5B",X"20",X"50",X"18",X"10",X"30",X"40",X"F8",X"70",X"D0",X"6A",X"AC",X"58", -- #38.5 : D70-D7F
X"0E",X"00",X"0C",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"30",X"00",X"1E",X"C1",X"48", -- #39.0 : D80-D8F
X"04",X"00",X"C0",X"5B",X"00",X"40",X"20",X"60",X"38",X"50",X"E8",X"18",X"E0",X"0A",X"C2",X"49", -- #39.1 : D90-D9F
X"02",X"00",X"60",X"5B",X"A0",X"60",X"A8",X"60",X"F8",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.0 : DA0-DAF
X"01",X"00",X"40",X"5B",X"A0",X"60",X"A8",X"60",X"F0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.1 : DB0-DBF
X"03",X"00",X"50",X"5B",X"A0",X"60",X"A8",X"60",X"F0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.2 : DC0-DCF
X"03",X"00",X"E0",X"5B",X"A0",X"60",X"B0",X"60",X"F0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.3 : DD0-DDF
X"05",X"01",X"40",X"5B",X"A0",X"60",X"C0",X"60",X"E8",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.4 : DE0-DEF
X"04",X"01",X"C0",X"5B",X"A8",X"60",X"C8",X"60",X"E0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.5 : DF0-DFF
X"04",X"01",X"C0",X"5B",X"A8",X"60",X"D0",X"60",X"E0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.6 : E00-E0F
X"01",X"00",X"E0",X"5B",X"A0",X"60",X"D0",X"60",X"E0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.7 : E10-E1F
X"03",X"00",X"60",X"5B",X"A0",X"60",X"D0",X"60",X"E0",X"60",X"10",X"20",X"20",X"60",X"37",X"57", -- #3A.8 : E20-E2F
X"02",X"01",X"00",X"5B",X"18",X"60",X"28",X"40",X"10",X"00",X"F0",X"48",X"BC",X"64",X"AC",X"59", -- #3B.0 : E30-E3F
X"02",X"01",X"40",X"5B",X"10",X"60",X"20",X"40",X"18",X"10",X"F0",X"48",X"BC",X"62",X"AF",X"56", -- #3B.1 : E40-E4F
X"02",X"01",X"80",X"5B",X"10",X"50",X"20",X"30",X"20",X"10",X"EC",X"48",X"C0",X"5E",X"B0",X"56", -- #3B.2 : E50-E5F
X"02",X"01",X"40",X"5B",X"F0",X"50",X"10",X"60",X"20",X"50",X"C0",X"60",X"10",X"02",X"B6",X"51", -- #3B.3 : E60-E6F
X"02",X"01",X"40",X"5B",X"E8",X"60",X"18",X"60",X"28",X"50",X"C4",X"60",X"04",X"00",X"B8",X"4A", -- #3B.4 : E70-E7F
X"03",X"01",X"40",X"5B",X"18",X"60",X"10",X"00",X"20",X"30",X"E8",X"58",X"C8",X"62",X"B5",X"54", -- #3B.5 : E80-E8F
X"03",X"00",X"E0",X"5B",X"00",X"00",X"18",X"60",X"30",X"50",X"E4",X"60",X"CC",X"58",X"B5",X"56", -- #3B.6 : E90-E9F
X"03",X"00",X"C0",X"5B",X"00",X"00",X"18",X"60",X"28",X"40",X"E4",X"60",X"D0",X"5C",X"B2",X"59", -- #3B.7 : EA0-EAF
X"03",X"00",X"80",X"5B",X"E8",X"60",X"10",X"60",X"20",X"20",X"CC",X"60",X"04",X"FC",X"B2",X"55", -- #3B.8 : EB0-EBF
X"03",X"03",X"80",X"5B",X"90",X"70",X"F0",X"50",X"00",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.0 : EC0-ECF
X"02",X"04",X"00",X"5B",X"90",X"70",X"F8",X"50",X"00",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.1 : ED0-EDF
X"03",X"05",X"00",X"5B",X"90",X"70",X"F8",X"50",X"00",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.2 : EE0-EEF
X"02",X"02",X"80",X"5B",X"90",X"70",X"F0",X"50",X"00",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.3 : EF0-EFF
X"03",X"02",X"80",X"5B",X"98",X"70",X"E8",X"50",X"F8",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.4 : F00-F0F
X"04",X"01",X"80",X"5B",X"A0",X"70",X"E0",X"50",X"F0",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.5 : F10-F1F
X"05",X"01",X"80",X"5B",X"A0",X"70",X"D8",X"50",X"F0",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.6 : F20-F2F
X"05",X"01",X"40",X"5B",X"A0",X"70",X"D8",X"50",X"F0",X"30",X"04",X"18",X"28",X"4E",X"39",X"41", -- #3C.7 : F30-F3F
X"04",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #3D.0 : F40-F4F
X"04",X"00",X"1C",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"38",X"E0",X"40",X"E6",X"1C", -- #3D.1 : F50-F5F
X"02",X"01",X"80",X"5B",X"F8",X"40",X"18",X"60",X"38",X"50",X"F8",X"18",X"D8",X"5C",X"A1",X"70", -- #3D.2 : F60-F6F
X"05",X"03",X"00",X"5B",X"18",X"40",X"28",X"50",X"20",X"20",X"FC",X"68",X"C4",X"60",X"A3",X"64", -- #3E.0 : F70-F7F
X"03",X"01",X"80",X"5B",X"10",X"10",X"28",X"60",X"38",X"40",X"FC",X"60",X"C0",X"62",X"A3",X"60", -- #3E.1 : F80-F8F
X"07",X"01",X"00",X"5B",X"28",X"60",X"18",X"10",X"30",X"30",X"00",X"60",X"C0",X"60",X"A0",X"68", -- #3E.2 : F90-F9F
X"04",X"00",X"00",X"40",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- #3F.0 : FA0-FAF
X"01",X"00",X"18",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"20",X"30",X"FC",X"24",X"DE",X"43", -- #3F.1 : FB0-FBF
X"02",X"05",X"00",X"5B",X"20",X"50",X"30",X"40",X"18",X"10",X"F8",X"68",X"E0",X"6E",X"99",X"6C", -- #3F.2 : FC0-FCF
X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- : FD0-FDF
X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00", -- : FE0-FEF
X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00",X"00" -- : FF0-FFF
);
begin
process(clk)
begin
if rising_edge(clk) then
data <= rom_data(to_integer(unsigned(addr)));
end if;
end process;
end architecture;
File diff suppressed because it is too large. Load diff
+103 -98
View File
@@ -201,7 +201,8 @@ input [64:0] RTC,
input F_Turbo, input F_Turbo,
input [2:0] turbo_speed, input [2:0] turbo_speed,
output [2:0] assigned_turbo_speed, output [2:0] assigned_turbo_speed,
input [2:0] Mem_Size input [2:0] Mem_Size,
input [1:0] AUTO_MODE
); );
@@ -323,7 +324,6 @@ wire HDD_EN_DATA;
reg [1:0] MPI_SCS; // IO select reg [1:0] MPI_SCS; // IO select
reg [1:0] MPI_CTS; // ROM select reg [1:0] MPI_CTS; // ROM select
reg [1:0] W_PROT;
reg SBS; reg SBS;
reg [11:0] SAM00; // 8MB 5:0 for 512kb reg [11:0] SAM00; // 8MB 5:0 for 512kb
reg [11:0] SAM01; reg [11:0] SAM01;
@@ -378,10 +378,6 @@ reg [18:0] LEFT_BUF2;
reg [18:0] RIGHT_BUF2; reg [18:0] RIGHT_BUF2;
reg [7:0] ORCH_LEFT; reg [7:0] ORCH_LEFT;
reg [7:0] ORCH_RIGHT; reg [7:0] ORCH_RIGHT;
reg [7:0] ORCH_LEFT_EXT;
reg [7:0] ORCH_RIGHT_EXT;
reg [7:0] ORCH_LEFT_EXT_BUF;
reg [7:0] ORCH_RIGHT_EXT_BUF;
reg DACLRCLK; reg DACLRCLK;
reg [5:0] DAC_STATE; reg [5:0] DAC_STATE;
wire H_FLAG; wire H_FLAG;
@@ -914,13 +910,13 @@ assign DATA_IN =
// FF03, FF07, FF0B, FF0F // FF03, FF07, FF0B, FF0F
({ADDRESS[15:5], ADDRESS[1:0]} == 13'b1111111100011) ? {!VSYNC1_IRQ_BUF[1], 3'b011, SEL[1], DDR2, VSYNC1_POL, VSYNC1_IRQ_INT}: ({ADDRESS[15:5], ADDRESS[1:0]} == 13'b1111111100011) ? {!VSYNC1_IRQ_BUF[1], 3'b011, SEL[1], DDR2, VSYNC1_POL, VSYNC1_IRQ_INT}:
// FF20, FF24, FF28, FF2C // FF20, FF24, FF28, FF2C
({ADDRESS[15:5], ADDRESS[1:0]} == 13'b1111111100100) ? DATA_REG3: ({ADDRESS[15:4], ADDRESS[1:0]} == 14'b11111111001000) ? DATA_REG3:
// FF21, FF25, FF29, FF2D // FF21, FF25, FF29, FF2D
({ADDRESS[15:5], ADDRESS[1:0]} == 13'b1111111100101) ? {4'b0011, CAS_MTR, DDR3, 2'b00}: // CD_POL, CD_INT}: ({ADDRESS[15:4], ADDRESS[1:0]} == 14'b11111111001001) ? {4'b0011, CAS_MTR, DDR3, 2'b00}: // CD_POL, CD_INT}:
// FF22, FF26, FF2A, FF2E // FF22, FF26, FF2A, FF2E
({ADDRESS[15:5], ADDRESS[1:0]} == 13'b1111111100110) ? DATA_REG4: ({ADDRESS[15:4], ADDRESS[1:0]} == 14'b11111111001010) ? DATA_REG4:
// FF23, FF27, FF2B, FF2F // FF23, FF27, FF2B, FF2F
({ADDRESS[15:5], ADDRESS[1:0]} == 13'b1111111100111) ? {!CART1_FIRQ_BUF[1], 3'b011, SOUND_EN, DDR4, CART1_POL, CART1_FIRQ_INT}: ({ADDRESS[15:4], ADDRESS[1:0]} == 14'b11111111001011) ? {!CART1_FIRQ_BUF[1], 3'b011, SOUND_EN, DDR4, CART1_POL, CART1_FIRQ_INT}:
// HiRes Joystick // HiRes Joystick
// ({PDL,ADDRESS} == 17'h0FF60) ? PADDLE_LATCH_0[11:4]: // ({PDL,ADDRESS} == 17'h0FF60) ? PADDLE_LATCH_0[11:4]:
// ({PDL,ADDRESS} == 17'h0FF61) ? {PADDLE_LATCH_0[3:0],4'b0000}: // ({PDL,ADDRESS} == 17'h0FF61) ? {PADDLE_LATCH_0[3:0],4'b0000}:
@@ -941,7 +937,10 @@ assign DATA_IN =
(ADDRESS == 16'hFF74) ? {1'b0, GART_READ[22:16]}: (ADDRESS == 16'hFF74) ? {1'b0, GART_READ[22:16]}:
(ADDRESS == 16'hFF75) ? { GART_READ[15:8]}: (ADDRESS == 16'hFF75) ? { GART_READ[15:8]}:
(ADDRESS == 16'hFF76) ? { GART_READ[7:0]}: (ADDRESS == 16'hFF76) ? { GART_READ[7:0]}:
(ADDRESS == 16'hFF7F) ? {2'b11, MPI_CTS, W_PROT, MPI_SCS}: `ifdef CoCo3_enable_Music_Speech
(ADDRESS == 16'hFF7E) ? MUS_SPEECH_RD_DATA:
`endif
(ADDRESS == 16'hFF7F) ? {2'b11, MPI_CTS, 2'b00, MPI_SCS}:
// (ADDRESS == 16'hFF80) ? {CK_DONE_BUF[1], // (ADDRESS == 16'hFF80) ? {CK_DONE_BUF[1],
// CK_FAIL, // CK_FAIL,
// CK_STATE}: // CK_STATE}:
@@ -1158,6 +1157,7 @@ assign cache_hit = (sdram_cpu_addr[24:1] == sdram_cpu_addr_L[24:1]);
// This sig is only used for the cycle accurate 09 // This sig is only used for the cycle accurate 09
reg cpu_cycle_ena; reg cpu_cycle_ena;
always @(negedge clk_sys or negedge RESET_N) always @(negedge clk_sys or negedge RESET_N)
begin begin
if(!RESET_N) if(!RESET_N)
@@ -1363,11 +1363,18 @@ end
assign RESET_P = !BUTTON_N[3] // Button assign RESET_P = !BUTTON_N[3] // Button
| RESET; // CTRL-ALT-DEL or CTRL-ALT-INS | RESET; // CTRL-ALT-DEL or CTRL-ALT-INS
reg first_time = 1'b1;
// Make sure all resets are enabled for a long enough time to allow voltages to settle // Make sure all resets are enabled for a long enough time to allow voltages to settle
always @ (posedge clk_sys) always @ (posedge clk_sys)
begin begin
if (RESET) if (RESET)
MUGS <= RESET_INS; //This is holding a <ctrl><alt><ins> across a reset to activate the Easter Egg MUGS <= RESET_INS; //This is holding a <ctrl><alt><ins> across a reset to activate the Easter Egg
if (first_time)
begin
MUGS <= 1'b0;
first_time = 1'b0;
end
end end
always @ (posedge clk_sys or posedge RESET_P) always @ (posedge clk_sys or posedge RESET_P)
@@ -1573,20 +1580,20 @@ fdc coco_fdc(
.WD1793_RD_CTRL(wd1793_read), .WD1793_RD_CTRL(wd1793_read),
// SD block level interface // SD block level interface
.img_mounted(img_mounted[3:0]), // signaling that new image has been mounted .img_mounted(img_mounted[5:2]), // signaling that new image has been mounted
.img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted .img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted
.img_size(img_size), // size of image in bytes. .img_size(img_size), // size of image in bytes.
.sd_lba(sd_lba[0:3]), .sd_lba(sd_lba[2:5]),
.sd_blk_cnt(sd_blk_cnt[0:3]), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384! .sd_blk_cnt(sd_blk_cnt[2:5]), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
.sd_rd(sd_rd[3:0]), .sd_rd(sd_rd[5:2]),
.sd_wr(sd_wr[3:0]), .sd_wr(sd_wr[5:2]),
.sd_ack(sd_ack[3:0]), .sd_ack(sd_ack[5:2]),
// SD byte level access. Signals for 2-PORT altsyncram. // SD byte level access. Signals for 2-PORT altsyncram.
.sd_buff_addr(sd_buff_addr), .sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout), .sd_buff_dout(sd_buff_dout),
.sd_buff_din(sd_buff_din[0:3]), .sd_buff_din(sd_buff_din[2:5]),
.sd_buff_wr(sd_buff_wr) .sd_buff_wr(sd_buff_wr)
); );
@@ -1623,23 +1630,46 @@ sdc_top coco_sdc_top(
.ext_response(ext_response), .ext_response(ext_response),
// SD block level interface // SD block level interface
.img_mounted(img_mounted[5:4]), // signaling that new image has been mounted .img_mounted(img_mounted[1:0]), // signaling that new image has been mounted
.img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted .img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted
.img_size(img_size), // size of image in bytes. .img_size(img_size), // size of image in bytes.
.sd_lba(sd_lba[4:5]), .sd_lba(sd_lba[0:1]),
.sd_blk_cnt(sd_blk_cnt[4:5]), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384! .sd_blk_cnt(sd_blk_cnt[0:1]), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
.sd_rd(sd_rd[5:4]), .sd_rd(sd_rd[1:0]),
.sd_wr(sd_wr[5:4]), .sd_wr(sd_wr[1:0]),
.sd_ack(sd_ack[5:4]), .sd_ack(sd_ack[1:0]),
// SD byte level access. Signals for 2-PORT altsyncram. // SD byte level access. Signals for 2-PORT altsyncram.
.sd_buff_addr(sd_buff_addr), .sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout), .sd_buff_dout(sd_buff_dout),
.sd_buff_din(sd_buff_din[4:5]), .sd_buff_din(sd_buff_din[0:1]),
.sd_buff_wr(sd_buff_wr) .sd_buff_wr(sd_buff_wr)
); );
////////////////////////////////////////////////////////////////
// Speech and Music cart
`ifdef CoCo3_enable_Music_Speech
wire [7:0] MUS_SPEECH_RD_DATA;
wire [7:0] Mus_Spch_Audio;
Music_Speech CoCo3_Music_Speech(
.RESET_N(RESET_N),
.CLK(clk_sys),
.CLK_EN(PH_2),
.CLK_1_78(clk_1_78),
.MPI_SCS(SWITCH[2:1]),
.ADDRESS(ADDRESS[15:0]),
.WRITE_DATA(DATA_OUT),
.READ_DATA(MUS_SPEECH_RD_DATA),
.RW_N(RW_N),
.AUDIO(Mus_Spch_Audio)
);
`endif
reg cart_firq_enable; reg cart_firq_enable;
@@ -1766,22 +1796,6 @@ begin
RST_FF02_N <= 1'b0; RST_FF02_N <= 1'b0;
17'h1FF1E: 17'h1FF1E:
RST_FF02_N <= 1'b0; RST_FF02_N <= 1'b0;
/* 17'h1FF20:
RST_FF20_N <= 1'b0;
17'h1FF24:
RST_FF20_N <= 1'b0;
17'h1FF28:
RST_FF20_N <= 1'b0;
17'h1FF2C:
RST_FF20_N <= 1'b0;
17'h1FF30:
RST_FF20_N <= 1'b0;
17'h1FF34:
RST_FF20_N <= 1'b0;
17'h1FF38:
RST_FF20_N <= 1'b0;
17'h1FF3C:
RST_FF20_N <= 1'b0; */
17'h1FF22: 17'h1FF22:
RST_FF22_N <= 1'b0; RST_FF22_N <= 1'b0;
17'h1FF26: 17'h1FF26:
@@ -1790,14 +1804,6 @@ begin
RST_FF22_N <= 1'b0; RST_FF22_N <= 1'b0;
17'h1FF2E: 17'h1FF2E:
RST_FF22_N <= 1'b0; RST_FF22_N <= 1'b0;
17'h1FF32:
RST_FF22_N <= 1'b0;
17'h1FF36:
RST_FF22_N <= 1'b0;
17'h1FF3A:
RST_FF22_N <= 1'b0;
17'h1FF3E:
RST_FF22_N <= 1'b0;
17'h0FF22: 17'h0FF22:
RST_FF22_N <= 1'b0; RST_FF22_N <= 1'b0;
17'h0FF26: 17'h0FF26:
@@ -1806,14 +1812,6 @@ begin
RST_FF22_N <= 1'b0; RST_FF22_N <= 1'b0;
17'h0FF2E: 17'h0FF2E:
RST_FF22_N <= 1'b0; RST_FF22_N <= 1'b0;
17'h0FF32:
RST_FF22_N <= 1'b0;
17'h0FF36:
RST_FF22_N <= 1'b0;
17'h0FF3A:
RST_FF22_N <= 1'b0;
17'h0FF3E:
RST_FF22_N <= 1'b0;
17'h1FF92: 17'h1FF92:
RST_FF92_N <= 1'b0; RST_FF92_N <= 1'b0;
17'h1FF93: 17'h1FF93:
@@ -2518,14 +2516,7 @@ begin
ORCH_LEFT <= 8'b10000000; ORCH_LEFT <= 8'b10000000;
// FF7B // FF7B
ORCH_RIGHT <= 8'b10000000; ORCH_RIGHT <= 8'b10000000;
// FF7C
ORCH_LEFT_EXT <= 8'b10000000;
ORCH_LEFT_EXT_BUF <= 8'b10000000;
// FF7D
ORCH_RIGHT_EXT <= 8'b10000000;
ORCH_RIGHT_EXT_BUF <= 8'b10000000;
// FF7F // FF7F
W_PROT <= 2'b11;
// MPI_SCS <= SWITCH[2:1]; // MPI_SCS <= SWITCH[2:1];
// MPI_CTS <= SWITCH[2:1]; // MPI_CTS <= SWITCH[2:1];
// FF8E-FF8F // FF8E-FF8F
@@ -2762,30 +2753,20 @@ begin
16'hFF20, 16'hFF20,
16'hFF24, 16'hFF24,
16'hFF28, 16'hFF28,
16'hFF2C, 16'hFF2C:
16'hFF30,
16'hFF34,
16'hFF38,
16'hFF3C:
begin begin
if(!DDR3) if(!DDR3)
DD_REG3 <= DATA_OUT; DD_REG3 <= DATA_OUT;
else else
begin begin
DTOA_CODE <= DATA_OUT[7:2]; DTOA_CODE <= DATA_OUT[7:2];
// if({SOUND_EN,SEL} == 3'b100)
// SOUND_DTOA <= DATA_OUT[7:2];
end end
end end
16'hFF21, 16'hFF21,
16'hFF25, 16'hFF25,
16'hFF29, 16'hFF29,
16'hFF2D, 16'hFF2D:
16'hFF31,
16'hFF35,
16'hFF39,
16'hFF3D:
begin begin
// CD_INT <= DATA_OUT[0]; // CD_INT <= DATA_OUT[0];
// CD_POL <= DATA_OUT[1]; // CD_POL <= DATA_OUT[1];
@@ -2796,11 +2777,7 @@ begin
16'hFF22, 16'hFF22,
16'hFF26, 16'hFF26,
16'hFF2A, 16'hFF2A,
16'hFF2E, 16'hFF2E:
16'hFF32,
16'hFF36,
16'hFF3A,
16'hFF3E:
begin begin
if(!DDR4) if(!DDR4)
DD_REG4 <= DATA_OUT; DD_REG4 <= DATA_OUT;
@@ -2815,11 +2792,7 @@ begin
16'hFF23, 16'hFF23,
16'hFF27, 16'hFF27,
16'hFF2B, 16'hFF2B,
16'hFF2F, 16'hFF2F:
16'hFF33,
16'hFF37,
16'hFF3B,
16'hFF3F:
begin begin
CART1_FIRQ_INT <= DATA_OUT[0]; CART1_FIRQ_INT <= DATA_OUT[0];
CART1_POL <= DATA_OUT[1]; CART1_POL <= DATA_OUT[1];
@@ -2831,21 +2804,13 @@ begin
16'hFF7A: 16'hFF7A:
begin begin
ORCH_LEFT <= DATA_OUT; ORCH_LEFT <= DATA_OUT;
ORCH_LEFT_EXT <= ORCH_LEFT_EXT_BUF;
end end
16'hFF7B: 16'hFF7B:
begin begin
ORCH_RIGHT <= DATA_OUT; ORCH_RIGHT <= DATA_OUT;
ORCH_RIGHT_EXT <= ORCH_RIGHT_EXT_BUF;
end end
16'hFF7C:
ORCH_LEFT_EXT_BUF <= DATA_OUT;
16'hFF7D:
ORCH_RIGHT_EXT_BUF <= DATA_OUT;
16'hFF7F: 16'hFF7F:
begin begin
W_PROT[0] <= DATA_OUT[2] | !DATA_OUT[3];
W_PROT[1] <= !DATA_OUT[2] | DATA_OUT[3] | W_PROT[0];
MPI_SCS <= DATA_OUT[1:0]; MPI_SCS <= DATA_OUT[1:0];
MPI_CTS <= DATA_OUT[5:4]; MPI_CTS <= DATA_OUT[5:4];
end end
@@ -3373,10 +3338,15 @@ end
// The code for the internal and Orchestra sound // The code for the internal and Orchestra sound
// Internal Sound generation // Internal Sound generation
assign SOUND = {1'b0, SBS, SOUND_DTOA};
assign SOUND_LEFT = {ORCH_LEFT, ORCH_LEFT_EXT} + {SOUND, 8'h00}; `ifdef CoCo3_enable_Music_Speech
assign SOUND_RIGHT = {ORCH_RIGHT, ORCH_RIGHT_EXT} + {SOUND, 8'h00}; assign SOUND = {SBS, 7'b0000000} + {SOUND_DTOA, SOUND_DTOA[5:4]} + Mus_Spch_Audio;
`else
assign SOUND = {SBS, 7'b0000000} + {SOUND_DTOA, SOUND_DTOA[5:4]};
`endif
assign SOUND_LEFT = {ORCH_LEFT, ORCH_LEFT} + {SOUND, SOUND};
assign SOUND_RIGHT = {ORCH_RIGHT, ORCH_RIGHT} + {SOUND, SOUND};
// the DAC isn't really a DAC but represents the DAC chip on the schematic. // the DAC isn't really a DAC but represents the DAC chip on the schematic.
@@ -3545,13 +3515,48 @@ COCOKEY coco_keyboard(
.SLO_CLK(V_SYNC_N), .SLO_CLK(V_SYNC_N),
.PS2_CLK(ps2_clk), .PS2_CLK(ps2_clk),
.PS2_DATA(ps2_data), .PS2_DATA(ps2_data),
.KEY(KEY), .KEY(KEY_RCVD),
.SHIFT(SHIFT), .SHIFT(SHIFT),
.SHIFT_OVERRIDE(SHIFT_OVERRIDE), .SHIFT_OVERRIDE(SHIFT_OVERRIDE),
.RESET(RESET), .RESET(RESET),
.RESET_INS(RESET_INS) .RESET_INS(RESET_INS)
); );
wire [72:0] KEY_RCVD;
Auto_Run CoCo3_Auto_Run(
.RESET_N(RESET_N),
.CLK(clk_sys),
.CLK_1_78(clk_1_78),
.MPI_SCS(SWITCH[2:1]),
.MODE(AUTO_MODE),
.AMW_ACK(AMW_ACK),
.KEY_IN(KEY_RCVD),
.KEY_OUT(KEY)
);
// Generate 1.78 Mhz [enable] GP clk
reg clk_1_78;
reg [4:0] clk_178_ctr;
always @ (negedge clk_sys or negedge RESET_N)
begin
if(!RESET_N)
begin
clk_1_78 <= 1'b0;
clk_178_ctr <= 5'b00000;
end
else
begin
clk_1_78 <= 1'b0;
clk_178_ctr <= clk_178_ctr + 1'b1;
if (clk_178_ctr == 5'd31)
begin
clk_1_78 <= 1'b1;
end
end
end
// PS2 Mouse [MiSTer] // PS2 Mouse [MiSTer]
// Borrowed from MAC PLUS // Borrowed from MAC PLUS
+1 -1
View File
@@ -92,7 +92,7 @@ reg SHIFT;
output SHIFT_OVERRIDE; output SHIFT_OVERRIDE;
reg SHIFT_OVERRIDE; reg SHIFT_OVERRIDE;
output RESET; output RESET;
reg RESET; reg RESET = 1'b0;
output RESET_INS; output RESET_INS;
reg RESET_INS = 1'b0; reg RESET_INS = 1'b0;
+1
View File
@@ -80,3 +80,4 @@
`set_feature(CoCo3_disable_GART_in_GIMEX, FEATURE_6)// Disable GIMEX ram transfers [GIMEX detection in OS( EOU] `set_feature(CoCo3_disable_GART_in_GIMEX, FEATURE_6)// Disable GIMEX ram transfers [GIMEX detection in OS( EOU]
//`set_feature(CoCo3_enable_Music_Speech, FEATURE_7) // Enable Music and Speech cart
+203
View File
@@ -0,0 +1,203 @@
////////////////////////////////////////////////////////////////////////////////
// Project Name: CoCo3FPGA Version 5.x.x
// File Name: Music_Speech.sv
//
// CoCo3 in an FPGA
//
////////////////////////////////////////////////////////////////////////////////
//
////////////////////////////////////////////////////////////////////////////////
//
// Color Computer 3 compatible system on a chip
//
//
// Copyright (c) 2008 Gary Becker ([email protected])
//
// All rights reserved
//
// Redistribution and use in source and synthezised forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// Redistributions in synthesized form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// Neither the name of the author nor the names of other contributors may
// be used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Please report bugs to the author, but before you do so, please
// make sure that this is not a derivative work and that
// you have the latest version of this file.
//
//
////////////////////////////////////////////////////////////////////////////////
// Stan Hodge
//
// Music_Speech.sv by Stan Hodge 02/16/24
////////////////////////////////////////////////////////////////////////////////
module Music_Speech(
input RESET_N,
input CLK,
input CLK_EN,
input CLK_1_78,
input [1:0] MPI_SCS, // slot id
input [15:0] ADDRESS, // from 09
input [7:0] WRITE_DATA, // from 09
output [7:0] READ_DATA, // to 09
input RW_N, // from 09
output [7:0] AUDIO // 8 bit audio output mixed from both Speech and Music chips
);
///////////////////////////////////////////////////////
// Host Interface
localparam Soft_Reset_Adrs = 15'hff7d;
localparam Data_Write_Adrs = 15'hff7e;
localparam SLOT_1 = 2'b00; // Nothing [RS-232)
localparam SLOT_2 = 2'b01; // SDC
localparam SLOT_3 = 2'b10; // Cartridge System
localparam SLOT_4 = 2'b11; // FDC
localparam S_M_SLOT = SLOT_2;
reg Soft_Reset;
wire System_Reset;
// Soft Reset Bit
always @ (negedge CLK or negedge RESET_N)
begin
if(!RESET_N)
begin
Soft_Reset <= 1'b0;
end
else
begin
if (CLK_EN && !RW_N && (MPI_SCS == S_M_SLOT) && (ADDRESS == Soft_Reset_Adrs))
begin
if (WRITE_DATA[0])
Soft_Reset <= !Soft_Reset;
else
Soft_Reset <= 1'b0;
end
end
end
assign System_Reset = RESET_N ^ Soft_Reset;
// New data and INT
reg INT3_N;
reg [7:0] SOC_WR_DATA;
always @ (negedge CLK or negedge Port_C[7])
begin
if(!Port_C[7])
begin
INT3_N <= 1'b1;
end
else
begin
if (CLK_EN && !RW_N && (MPI_SCS == S_M_SLOT) && (ADDRESS == Data_Write_Adrs))
begin
SOC_WR_DATA <= WRITE_DATA;
INT3_N <= 1'b0;
end
end
end
//////////////////////////////////////////////////////////////////////////////
// Read Data
wire Speech_Status;
wire Music_Status;
assign READ_DATA = {INT3_N, Speech_Status, Music_Status, 5'b00000};
/////////////////////////////////////////////////////////////////////////////
// SOC
wire INT1_N;
wire [7:0] Port_A, Port_B, Port_C, Port_D_IN, Port_D_OUT;
Music_Speech_SOC CoCo3_Music_Speech_SOC(
.RESET_N(RESET_N),
.CLKIN(CLK),
.CLK_1_78(CLK_1_78),
.INT1_N(INT1_N),
.INT3_N(INT3_N),
.PORT_A(Port_A),
.PORT_B(Port_B),
.PORT_C(Port_C),
.PORT_D_OUT(Port_D_OUT),
.PORT_D_IN(Port_D_IN)
);
/////////////////////////////////////////////////////////////////////////////
// SRAM Chip
COCO_SRAM_6116 CoCo3_SRAM_6116(
.CLK(CLK),
.ADDR({Port_C[2:0], Port_B}), // Check
.R_N(Port_C[4]), // Check
.DATA_O(Port_D_IN),
.DATA_I(Port_D_OUT)
);
/////////////////////////////////////////////////////////////////////////////
// Speech Chip
sp0256 CoCo3_sp0256(
.clock(),
.ce(),
.reset(),
.input_rdy(),
.allophone(),
.trig_allophone(),
.audio_out()
);
/////////////////////////////////////////////////////////////////////////////
// Music Chip
ym2149_audio CoCo3_ym2149_audio(
.clk_i(CLK),
.en_clk_psg_i(CLK_1_78),
.sel_n_i(1'b1), // No divide by 2
.reset_n_i(RESET_N),
.bc_i(),
.bdir_i(),
.data_i(),
.data_r_o(),
// .ch_a_o(),
// .ch_b_o(),
// .ch_c_o()
.mix_audio_o(), //[13:0]
// .pcm14s_o()
);
endmodule
+103
View File
@@ -0,0 +1,103 @@
--//////////////////////////////////////////////////////////////////////////////
-- Project Name: CoCo3FPGA Version 4.0
-- File Name: CoCo_ram_128x8.vhd
--
-- CoCo3 in an FPGA
--
-- Revision: 5.x.x
--//////////////////////////////////////////////////////////////////////////////
--
-- Color Computer 3 compatible system on a chip
--
-- Version : 5.0.x.x
--
-- Copyright (c) 2008 Gary Becker ([email protected])
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- Redistributions of source code must retain the above copyright notice,
-- this list of conditions and the following disclaimer.
--
-- Redistributions in synthesized form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- Neither the name of the author nor the names of other contributors may
-- be used to endorse or promote products derived from this software without
-- specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
-- Please report bugs to the author, but before you do so, please
-- make sure that this is not a derivative work and that
-- you have the latest version of this file.
--
-- The latest version of this file can be found at:
-- http://groups.yahoo.com/group/CoCo3FPGA
--
-- File history :
--
-- 1.0 Full Release
-- 2.0 Partial Release
-- 3.0 Full Release
-- 3.0.0.1 Update to fix DoD interrupt issue
--//////////////////////////////////////////////////////////////////////////////
-- Gary Becker
-- [email protected]
--//////////////////////////////////////////////////////////////////////////////
--//////////////////////////////////////////////////////////////////////////////
--////////////////////////////////////////////////////////////////////////////////
--// MISTer Conversion by Stan Hodge and Alan Steremberg (& Gary Becker)
--// [email protected]
--//
--////////////////////////////////////////////////////////////////////////////////
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.numeric_std.all;
entity COCO_SRAM_6116 is
port (
CLK : in std_logic;
ENA : in std_logic;
ADDR : in std_logic_vector(6 downto 0);
R_W : in std_logic;
DATA_I : in std_logic_vector(7 downto 0);
DATA_O : out std_logic_vector(7 downto 0)
);
end;
architecture RTL of COCO_SRAM_128x8 is
type SRAM_ARRAY is array(0 to 127) of std_logic_vector(7 downto 0);
signal SRAM : SRAM_ARRAY;
begin
P_SRAM : process(CLK,ADDR,R_W,DATA_I)
begin
if CLK'event and CLK='1' then
if ENA = '1' and R_W = '0' then
SRAM(to_integer(unsigned(ADDR))) <= DATA_I;
end if;
end if;
end process;
DATA_O <= SRAM(to_integer(unsigned(ADDR)));
end RTL;
+102
View File
@@ -0,0 +1,102 @@
--//////////////////////////////////////////////////////////////////////////////
-- Project Name: CoCo3FPGA Version 4.0
-- File Name: CoCo_ram_6116.vhd
--
-- CoCo3 in an FPGA
--
-- Revision: 4.0 07/10/16
--//////////////////////////////////////////////////////////////////////////////
--
-- Color Computer 3 compatible system on a chip
--
-- Version : 5.0.x.x
--
-- Copyright (c) 2008 Gary Becker ([email protected])
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- Redistributions of source code must retain the above copyright notice,
-- this list of conditions and the following disclaimer.
--
-- Redistributions in synthesized form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- Neither the name of the author nor the names of other contributors may
-- be used to endorse or promote products derived from this software without
-- specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
-- Please report bugs to the author, but before you do so, please
-- make sure that this is not a derivative work and that
-- you have the latest version of this file.
--
-- The latest version of this file can be found at:
-- http://groups.yahoo.com/group/CoCo3FPGA
--
-- File history :
--
-- 1.0 Full Release
-- 2.0 Partial Release
-- 3.0 Full Release
-- 3.0.0.1 Update to fix DoD interrupt issue
--//////////////////////////////////////////////////////////////////////////////
-- Gary Becker
-- [email protected]
--//////////////////////////////////////////////////////////////////////////////
--//////////////////////////////////////////////////////////////////////////////
--////////////////////////////////////////////////////////////////////////////////
--// MISTer Conversion by Stan Hodge and Alan Steremberg (& Gary Becker)
--// [email protected]
--//
--////////////////////////////////////////////////////////////////////////////////
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.numeric_std.all;
entity COCO_SRAM_6116 is
port (
CLK : in std_logic;
ADDR : in std_logic_vector(10 downto 0);
R_W : in std_logic;
DATA_I : in std_logic_vector(7 downto 0);
DATA_O : out std_logic_vector(7 downto 0)
);
end;
architecture RTL of COCO_SRAM_6116 is
type SRAM_ARRAY is array(0 to 2047) of std_logic_vector(7 downto 0);
signal SRAM : SRAM_ARRAY;
begin
P_SRAM : process(CLK,ADDR,R_W,DATA_I)
begin
if CLK'event and CLK='1' then
if R_W = '0' then
SRAM(to_integer(unsigned(ADDR))) <= DATA_I;
end if;
end if;
end process;
DATA_O <= SRAM(to_integer(unsigned(ADDR)));
end RTL;