1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the
max value of 63. Specifically '>' was changed to '>=' the DTOA values.
This fixes DonPan and is verified in Diagnostics 2.0.
5. HiRES[3] is used to enable some of the higher resolution graphics modes
Gary Becker designed into CoCo3FPGA, and while these are not fully
supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt
the graphics engine. For some reason Color File II manipultes this bit
and was causing it not to work. This change requires the SG6 extensions
to be enabled to set HiRES[3]. So specifically in the Video Settings
insure CoCo3 LC is set to Yes. Color File II now works properly.
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2. Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3. Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6. Formerly it was used to
enable artifacts. That is no longer true. For most compatibility it has be relabeled 'CoCo3 LC',
and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
For some OS9 software this must be set to 'Yes' which is the default.
4. Added 'Artifact Type' menu in 'Video Settings' menu. Settings are 'MESS', 'Simple', and 'NONE'. 'MESS'
is the default and has improved fidelity over 'Simple' which was previously implemented in connection
with SW5 [see above]. Again, the default should be used. The artifact emulation can be turned off
by setting the option to 'NONE'. The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
artifact settings.
CTF = Compile Time Feature...
1. Interrupt system restored to previous code - improved compadibility.
2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3. Recoded sdc and fdc to only have one instance of the wd1773.
4. Re-added software disable in sdc [Ext 'g'].
5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11 Corrected missing begin statement in master timing loop.
12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
14. Updated MiSTer framework
Added GIME-X interface for Turbo operation including new 2.68 Mhz AND 9.54 Mhz.
Additionally - minor GIME-X code alignments in the addressing section added.
Release of the following:
1. CoCoSDC now operates at 7.16Mhz without errors.
2. CoCoSDC moved to slot 2. Here it only has 2 drives. They can be ss/ds 35/40/80 or superfloppies. Menu added to allow selection of slot 4 drives [4] while selected for slot 2- OS9 can use.
3. Added mouse to joystick support for the right mouse. Works with GSHELL.
4. Doc update.
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
Modified Mister_Video.v to expose VBORDER. HBORDER delayed 2 clocks to move it away from hsync color change. VBOARDER used as is. Both of these signals supplied to MiSTer's upscaler as HBLANK and VBLANK.