Fixed Rs-232 Physical/MiSTer Switch
Fixed 6551 UART to support 115200
Added slot 1 config and extra ROM [boot2.rom] to support FujiNet.
Cleaned up some suttle errors and compatibility with verilator
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
Save your settings to cause the changes to be remembered. The Auto Run system re-arms
upon using the 'Cold Boot' menu item.
4. Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the
max value of 63. Specifically '>' was changed to '>=' the DTOA values.
This fixes DonPan and is verified in Diagnostics 2.0.
5. HiRES[3] is used to enable some of the higher resolution graphics modes
Gary Becker designed into CoCo3FPGA, and while these are not fully
supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt
the graphics engine. For some reason Color File II manipultes this bit
and was causing it not to work. This change requires the SG6 extensions
to be enabled to set HiRES[3]. So specifically in the Video Settings
insure CoCo3 LC is set to Yes. Color File II now works properly.