Commit Graph
14 Commits
Author SHA1 Message Date
shodge12 49a8aee74d Release 20240205
1.	For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2.	Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3.	Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6.  Formerly it was used to
    enable artifacts.  That is no longer true.  For most compatibility it has be relabeled 'CoCo3 LC',
	and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
	For some OS9 software this must be set to 'Yes' which is the default.
4.	Added 'Artifact Type' menu in 'Video Settings' menu.  Settings are 'MESS', 'Simple', and 'NONE'.  'MESS'
	is the default and has improved fidelity over 'Simple' which was previously implemented in connection
	with SW5 [see above].  Again, the default should be used.  The artifact emulation can be turned off
	by setting the option to 'NONE'.  The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
	artifact settings.
2024-02-05 21:37:20 -05:00
shodge12 d593e3fc4e CART and OS9 improvements. Cycle accurate 6809 at up to 9.54 Mhz.
CTF = Compile Time Feature...

1.	Interrupt system restored to previous code - improved compadibility.
2.	Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3.	Recoded sdc and fdc to only have one instance of the wd1773.
4.	Re-added software disable in sdc [Ext 'g'].
5.	Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6.	Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7.	Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8.	Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9.	Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10	Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11	Corrected missing begin statement in master timing loop.
12.	Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
14.	Updated MiSTer framework
2023-10-23 22:44:34 -04:00
Alan Steremberg 8cb1f96855 fix 2023-02-24 15:09:40 -08:00
shodge12 f375d7e245 Add new speeds and better GIME-X support.
Added GIME-X interface for Turbo operation including new 2.68 Mhz AND 9.54 Mhz.

Additionally - minor GIME-X code alignments in the addressing section added.
2022-02-26 17:16:58 -05:00
shodge12 8767e24f65 Release 20220219
Release of the following:
1. CoCoSDC now operates at 7.16Mhz without errors.
2. CoCoSDC moved to slot 2.  Here it only has 2 drives.  They can be ss/ds 35/40/80 or superfloppies.  Menu added to allow selection of slot 4 drives [4] while selected for slot 2- OS9 can use.
3. Added mouse to joystick support for the right mouse.  Works with GSHELL.
4. Doc update.
2022-02-19 20:25:28 -05:00
shodge12 44af977106 20220211 Release...
Added register level compatibility to be able to run NitrOS9 EOU vhd distributions.
2022-02-11 20:49:24 -05:00
shodge12 6c2f37c250 Delete CoCo3_20220210.rbf
Wrong date
2022-02-11 20:47:37 -05:00
shodge12 e302f9108a 20220211 Release
Added cocosdc register compatibility for running NitrOS9 EOU vhd distrobutions.
2022-02-11 20:46:07 -05:00
Alan Steremberg a8014eae0b added first version of overview 2022-02-10 11:20:53 -08:00
shodge12 1228d235c4 CoCo3 20220124
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
2022-01-25 02:15:02 -05:00
shodge12 f5867a3ff6 Delete CoCo3_220124.rbf 2022-01-25 02:12:40 -05:00
shodge12 50d393ec4e CoCo3 220125
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
2022-01-25 01:52:56 -05:00
shodge12 03366bc955 20211229 Release. Fixed video over-scan issues.
Modified Mister_Video.v to expose VBORDER.  HBORDER delayed 2 clocks to move it away from hsync color change. VBOARDER used as is.  Both of these signals supplied to MiSTer's upscaler as HBLANK and VBLANK.
2021-12-29 20:01:53 -05:00
Alan Steremberg 14fbee7dbe release 2021-12-21 17:06:17 -08:00