A cart loaded after boot in Multi-Pak slot 3 made CART toggle every CPU cycle
forever -- the autostart of a program pak, whose CART pin is tied to Q. A
disk-style ROM (HDB-DOS, Disk BASIC) never drives CART; BASIC starts it from
the "DK" signature at power-on. Under the toggling, FujiNet's CFGLOAD.BIN
(which re-enables the CART interrupt) hung in an endless FIRQ after 17
DriveWire reads; an OSD reset cleared it.
- A cart whose first two bytes are "DK" now gets a cold boot (the existing
AMW/EE_Cold_Bt path) instead of the autostart interrupt.
- OSD "Cart Interrupt Disabled" (status[16] -> SWITCH[4]) was not connected;
it now suppresses the slot-3 autostart interrupt.
- Program paks are unchanged: Arkanoid loaded after boot still autostarts.
Verified in the Verilator sim with the hardware sequence (cart loaded after
boot, slot 3, no reset): the FujiNet S3 cart now reads all 98 sectors of
CONFIG, matching the MiSTer after a manual reset. Regression tests unchanged.
The sim gains --cart-frame N to load the cart after boot, as the OSD and MGL
do; loading it before reset had hidden the problem.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim
framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule,
screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette,
and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA
trace) with a minimal DriveWire server and a script to run the real FujiNet
daemon against the sim. See verilator/README.md.
- The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in
verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809).
- sdram2.sv is simulated with its own controller logic and an SDR chip model.
- run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on
the text screen and byte-for-byte against test-ref/ screenshots.
rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of
inside generate blocks. They are assigned outside those blocks; Quartus
accepted it, Verilator rejected spt_addr and silently split buff_wr into a
separate net. No change on the FPGA (FM-7 made the same fix).
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>