Fixed minor change to MESS artifact function. Fixed full color bus not being driven. Updated docs. Updated changes.txt. SDC size return constant changed to $404040. Cleaned up Video Settings menu and defaults.
1. For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2. Changed PIA(s) addressing to alow complete mirror through FF00-FF3F
CTF = Compile Time Feature...
1. Interrupt system restored to previous code - improved compadibility.
2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3. Recoded sdc and fdc to only have one instance of the wd1773.
4. Re-added software disable in sdc [Ext 'g'].
5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11 Corrected missing begin statement in master timing loop.
12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
14. Updated MiSTer framework
CTF = Compile Time Feature...
1. Interrupt system restored to previous code - improved compadibility.
2. Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3. Recoded sdc and fdc to only have one instance of the wd1773.
4. Re-added software disable in sdc [Ext 'g'].
5. Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6. Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7. Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8. Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9. Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10 Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11 Corrected missing begin statement in master timing loop.
12. Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
To Do
0. Update framework
Added GIME-X interface for Turbo operation including new 2.68 Mhz AND 9.54 Mhz.
Additionally - minor GIME-X code alignments in the addressing section added.
Added GIME-X interface for Turbo operation including new 2.68 Mhz AND 9.54 Mhz.
Additionally - minor GIME-X code alignments in the addressing section added.
Release of the following:
1. CoCoSDC now operates at 7.16Mhz without errors.
2. CoCoSDC moved to slot 2. Here it only has 2 drives. They can be ss/ds 35/40/80 or superfloppies. Menu added to allow selection of slot 4 drives [4] while selected for slot 2- OS9 can use.
3. Added mouse to joystick support for the right mouse. Works with GSHELL.
4. Doc update.
Minor update to menu.
Release of the following:
1. CoCoSDC now operates at 7.16Mhz without errors.
2. CoCoSDC moved to slot 2. Here it only has 2 drives. They can be ss/ds 35/40/80 or superfloppies. Menu added to allow selection of slot 4 drives [4] while selected for slot 2- OS9 can use.
3. Added mouse to joystick support for the right mouse. Works with GSHELL.
4. Doc update.
Re-coded sdc state mach using typedef. Added halt to state mach to allow for MiSTer's slow sector response and compensate for os9 timeouts.
This code works at 7.16Mhz.
20220211 Release.
CoCosdc register compatible to allow running of NitrOS9 EOU vhd modules.
Known issues: do not cause EOU (cocosdc) running at 7.16Mhz to write to the file system. Limited testing shows it works at 3.58Mhz and lower.
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented in new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].