- sim.v: the coco3fpga ports changed (RED_O/GREEN_O/BLUE_O, PROBE_O/PROBE_I,
Display_Debug) and so did the switch word (rs_swap, UART_INPUT, and the cart
interrupt option on SWITCH[9]); mirror CoCo3.sv. SNAC inputs idle high.
- rtl/ovo.v: Verilog translation of the new rtl/OVO.vhd overlay; the
Makefile drops the removed Mister_Video_GIMEX.v.
- PIX_CLK is now a clk_sys enable, high 2 of every 4 cycles, fed to the
mixer's ce_pix. Capture video as video_mixer.sv does: on a clk_sys rising
edge, one pixel per rising edge of the enable.
- New reference screenshots: the release's video timing moves the picture
about 2 pixels; text checks unchanged.
- Commit tests/dw_boot.sh, which the dw_boot* ignore pattern was hiding.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim
framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule,
screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette,
and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA
trace) with a minimal DriveWire server and a script to run the real FujiNet
daemon against the sim. See verilator/README.md.
- The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in
verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809).
- sdram2.sv is simulated with its own controller logic and an SDR chip model.
- run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on
the text screen and byte-for-byte against test-ref/ screenshots.
rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of
inside generate blocks. They are assigned outside those blocks; Quartus
accepted it, Verilator rejected spt_addr and silently split buff_wr into a
separate net. No change on the FPGA (FM-7 made the same fix).
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>