17 Commits
Author SHA1 Message Date
shodge12 8b8cf72d1f Release Compiled Version 20260927
Release Compiled Version 20260927
2026-10-02 01:05:24 -04:00
shodge12 1da70a7929 Core changes and CSAVE support.
1.	Added support for cassette save.  To use: A) You have to have a file [anyname.cas]
	which is larger than needed.  B) Select the file through the UI Menu 'Save
	Cassette'.  C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"'
	E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write.  The file can
	now be loaded or copied.  Note a dummy file of a specific size can be created in
	the MiSTer SSH shell in the /media/fat/games/coco3 with the command:
	'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length]
2.	Fixed serial interrupt [6551] to not be functional on slot 3 [carts].
3.	Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used
	for logic analyzer debug.  This will only occur when `define	Config_Debug is
	enabled in config.v.
4.	Fixed MUGS of powerup issue occurring on some MiSTer units.
5.	Fixed incorrect application of GIME_IRQ on legacy interrupts.  Fixed race condition
	on reading IRQ status vs clearing the interrupt.
6.	Improved Castle of Tharoggad.  App now loads but locks as the graphics animate.  This
	change improved mmu usage through to CARTS.
7.	Builds now keep track of multiple builds in the same date.  It shows as V240512-001 in
	the menus.  Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is
	supplied in the archive to show how it works.
8.	Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font -
	IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format.
	Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display
	a clock.
9.	Large improvement in the Timer function.  Code closer emulates COCO3 Timer. Fixes
	Sliphead cart.
10.	In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for
	the FDC.  This saved space but introduced a bug when using multiple drives at the same
	time - like a copy command.  This change was removed and the copy command works again.

To Do...
1.	Add Speech / Music cart
2.	Fix Castle of Tharoggad
2024-05-14 23:00:16 -04:00
shodge12 f940be1a2b Release 20240318
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floopy or HD
   and copy it to a file name of 'boot.vhd'. This will be auto mounted to drive 0
   on the SDC. In the menu, find a new item Auto Run:. It can be set to No, DOS or
   AUTO.BAS. Choosing dos causes the 'DOS' command to be executed on power up. Setting
   the option to 'AUTO.BAS' will cause a 'RUN"AUTO' command to be executed upon powerup.
   Save your settings to cause the changes to be remembered. The Auto Run system re-arms
   upon using the 'Cold Boot' menu item.
4.	Fixed MiSTer / CoCo3 interface preventing the joysticks ever reaching the
	max value of 63. Specifically '>' was changed to '>=' the DTOA values.
	This fixes DonPan and is verified in Diagnostics 2.0.
5.	HiRES[3] is used to enable some of the higher resolution graphics modes
	Gary Becker designed into CoCo3FPGA, and while these are not fully
	supported, the control signals such as HiRES[3] at $FF98 bit 6 affectt
	the graphics engine.  For some reason Color File II manipultes this bit
	and was causing it not to work.  This change requires the SG6 extensions
	to be enabled to set HiRES[3].  So specifically in the Video Settings
	insure CoCo3 LC is set to Yes.  Color File II now works properly.
2024-03-18 18:22:32 -04:00
shodge12 49a8aee74d Release 20240205
1.	For cycle accurate 6809, changed PH2 to cpu_cycle_ena. (Improve timing of control register writes)
2.	Changed PIA(s) addressing to allow complete mirror through FF00-FF3F
3.	Corrected usage of SG6 enable (SW5 in orig code) which allows the usage of SG6.  Formerly it was used to
    enable artifacts.  That is no longer true.  For most compatibility it has be relabeled 'CoCo3 LC',
	and it default setting is Yes which is fully compatible with the CoCo3. [setting no allows SG6 mode].
	For some OS9 software this must be set to 'Yes' which is the default.
4.	Added 'Artifact Type' menu in 'Video Settings' menu.  Settings are 'MESS', 'Simple', and 'NONE'.  'MESS'
	is the default and has improved fidelity over 'Simple' which was previously implemented in connection
	with SW5 [see above].  Again, the default should be used.  The artifact emulation can be turned off
	by setting the option to 'NONE'.  The 'Artifact Color Set' choice is only valid for 'MESS' and 'Simple'
	artifact settings.
2024-02-05 21:37:20 -05:00
shodge12 d593e3fc4e CART and OS9 improvements. Cycle accurate 6809 at up to 9.54 Mhz.
CTF = Compile Time Feature...

1.	Interrupt system restored to previous code - improved compadibility.
2.	Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3.	Recoded sdc and fdc to only have one instance of the wd1773.
4.	Re-added software disable in sdc [Ext 'g'].
5.	Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6.	Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7.	Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8.	Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9.	Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10	Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11	Corrected missing begin statement in master timing loop.
12.	Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
14.	Updated MiSTer framework
2023-10-23 22:44:34 -04:00
Alan Steremberg 8cb1f96855 fix 2023-02-24 15:09:40 -08:00
shodge12 f375d7e245 Add new speeds and better GIME-X support.
Added GIME-X interface for Turbo operation including new 2.68 Mhz AND 9.54 Mhz.

Additionally - minor GIME-X code alignments in the addressing section added.
2022-02-26 17:16:58 -05:00
shodge12 8767e24f65 Release 20220219
Release of the following:
1. CoCoSDC now operates at 7.16Mhz without errors.
2. CoCoSDC moved to slot 2.  Here it only has 2 drives.  They can be ss/ds 35/40/80 or superfloppies.  Menu added to allow selection of slot 4 drives [4] while selected for slot 2- OS9 can use.
3. Added mouse to joystick support for the right mouse.  Works with GSHELL.
4. Doc update.
2022-02-19 20:25:28 -05:00
shodge12 44af977106 20220211 Release...
Added register level compatibility to be able to run NitrOS9 EOU vhd distributions.
2022-02-11 20:49:24 -05:00
shodge12 6c2f37c250 Delete CoCo3_20220210.rbf
Wrong date
2022-02-11 20:47:37 -05:00
shodge12 e302f9108a 20220211 Release
Added cocosdc register compatibility for running NitrOS9 EOU vhd distrobutions.
2022-02-11 20:46:07 -05:00
Alan Steremberg a8014eae0b added first version of overview 2022-02-10 11:20:53 -08:00
shodge12 1228d235c4 CoCo3 20220124
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
2022-01-25 02:15:02 -05:00
shodge12 f5867a3ff6 Delete CoCo3_220124.rbf 2022-01-25 02:12:40 -05:00
shodge12 50d393ec4e CoCo3 220125
CoCo3_220124.rtf Updates:
1: Fully supports CoCo3_FPGA / GIME-X byte move transactions (GART) via addresses $FFE1-$FFE9 [see docs].
2: Fully supports CoCo3_FPGA / GIME-X font manipulation [see docs].
3: Cold Start implemented new approach. The fixes the problem of going from Disk Basic to Extended Basic and not seeing a
difference. The change has side effect of not being able to cold start out of OS9. Work-around: <ctrl><alt><ins> followed by
<ctrl><alt><del>.
4: Memory size now supports 16MB. New OSD control allows the memory selections of 512K, 1M, 2M, and 16M.
5: New OSD option to 'Force Turbo' mode. If set the OSD turbo mode speed settings always control the coco's clock rate.
6: Tons of code cleanup including closer alignment to GIME-C and CoCo3_FPGA code. Better Cart compatibility.
7: MPI selection in the OSD has changed. Orch90 has been removed [you can load it as a cartridge or disk]. The selections are
(Slot 3) ECB and (Slot 4) Disk.
8: RTC has been added via addresses [$FFC0 - $FFC7] - [see docs].
9: New 'Force Turbo' mode is OSD.
2022-01-25 01:52:56 -05:00
shodge12 03366bc955 20211229 Release. Fixed video over-scan issues.
Modified Mister_Video.v to expose VBORDER.  HBORDER delayed 2 clocks to move it away from hsync color change. VBOARDER used as is.  Both of these signals supplied to MiSTer's upscaler as HBLANK and VBLANK.
2021-12-29 20:01:53 -05:00
Alan Steremberg 14fbee7dbe release 2021-12-21 17:06:17 -08:00