Pre-release check-in
This is a check-in prior to release. This version has the orch-90 rom. The release will not.
This commit is contained in:
1 parent
3d5b904290
commit
f73e6fd93d
11 files changed
+850
-130
No files matched your search
@@ -0,0 +1,221 @@
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Project Name: CoCo3FPGA Version 5.0
|
||||
// File Name: AMW.v
|
||||
//
|
||||
// CoCo3 in an FPGA
|
||||
//
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
//
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
//
|
||||
// Color Computer 3 compatible system on a chip
|
||||
//
|
||||
//
|
||||
// Copyright (c) 2008 Gary Becker ([email protected])
|
||||
//
|
||||
// All rights reserved
|
||||
//
|
||||
// Redistribution and use in source and synthezised forms, with or without
|
||||
// modification, are permitted provided that the following conditions are met:
|
||||
//
|
||||
// Redistributions of source code must retain the above copyright notice,
|
||||
// this list of conditions and the following disclaimer.
|
||||
//
|
||||
// Redistributions in synthesized form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in the
|
||||
// documentation and/or other materials provided with the distribution.
|
||||
//
|
||||
// Neither the name of the author nor the names of other contributors may
|
||||
// be used to endorse or promote products derived from this software without
|
||||
// specific prior written permission.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
// POSSIBILITY OF SUCH DAMAGE.
|
||||
//
|
||||
// Please report bugs to the author, but before you do so, please
|
||||
// make sure that this is not a derivative work and that
|
||||
// you have the latest version of this file.
|
||||
//
|
||||
//
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Stan Hodge
|
||||
//
|
||||
// Automated Memory Write by Stan Hodge 1/20/22
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
module AMW(
|
||||
input CLK,
|
||||
input RESET_N,
|
||||
|
||||
input Trigger,
|
||||
input Restart,
|
||||
input Cycle_Run, // AMW_WR shows cycle in process
|
||||
|
||||
output reg [24:0] AMW_Adrs,
|
||||
output reg [7:0] AMW_Data,
|
||||
output reg AMW_EN,
|
||||
output reg AMW_Ready,
|
||||
output reg AMW_End
|
||||
);
|
||||
|
||||
////////////////////////////////////////////////////////////
|
||||
|
||||
COCO_ROM_16 COCO3_ROM_Instructions (
|
||||
.ADDR(pgm_address),
|
||||
.DATA(DOUT)
|
||||
);
|
||||
|
||||
wire [7:0] DOUT;
|
||||
|
||||
// Instructions are 5 bytes
|
||||
|
||||
// valid, nc, nc, nc, nc, nc, nc, a24
|
||||
// a23, a22, a21, a20, a19, a18, a17, a16
|
||||
// a15, a14, a13, a12, a11, a10, a09, a08
|
||||
// a07, a06, a05, a04, a03, a02, a01, a00
|
||||
// d07, d06, d05, d04, d03, d02, d01, d00
|
||||
|
||||
////////////////////////////////////////////////////////////
|
||||
|
||||
localparam AMW_START = 4'd0;
|
||||
localparam AMW_F1 = 4'd1;
|
||||
localparam AMW_F2 = 4'd2;
|
||||
localparam AMW_F3 = 4'd3;
|
||||
localparam AMW_F4 = 4'd4;
|
||||
localparam AMW_F5 = 4'd5;
|
||||
localparam AMW_WAIT = 4'd6;
|
||||
localparam AMW_W1 = 4'd7;
|
||||
localparam AMW_W2 = 4'd8;
|
||||
localparam AMW_ST_END = 4'd9;
|
||||
|
||||
reg [3:0] state;
|
||||
reg [3:0] pgm_address;
|
||||
reg valid;
|
||||
reg Trigger_D;
|
||||
reg run;
|
||||
|
||||
always @(negedge CLK or negedge RESET_N)
|
||||
begin
|
||||
if(!RESET_N)
|
||||
begin
|
||||
state <= AMW_START;
|
||||
pgm_address <= 4'b0000;
|
||||
AMW_Ready <= 1'b0;
|
||||
valid <= 1'b0;
|
||||
AMW_End <= 1'b0;
|
||||
AMW_EN <= 1'b0;
|
||||
run <= 1'b0;
|
||||
end
|
||||
else
|
||||
begin
|
||||
|
||||
Trigger_D <= Trigger;
|
||||
|
||||
case(state)
|
||||
|
||||
AMW_START:
|
||||
begin
|
||||
pgm_address <= 4'b0000;
|
||||
AMW_Ready <= 1'b0;
|
||||
AMW_EN <= 1'b0;
|
||||
state <= AMW_F1;
|
||||
run <= 1'b0;
|
||||
end
|
||||
|
||||
AMW_F1:
|
||||
begin
|
||||
AMW_Ready <= 1'b0;
|
||||
valid <= DOUT[7];
|
||||
AMW_Adrs[24] <= DOUT[0];
|
||||
pgm_address <= pgm_address + 1'b1;
|
||||
state <= AMW_F2;
|
||||
end
|
||||
|
||||
AMW_F2:
|
||||
begin
|
||||
if (~valid)
|
||||
state <= AMW_ST_END;
|
||||
else
|
||||
begin
|
||||
AMW_Adrs[23:16] <= DOUT[7:0];
|
||||
pgm_address <= pgm_address + 1'b1;
|
||||
state <= AMW_F3;
|
||||
end
|
||||
end
|
||||
|
||||
AMW_F3:
|
||||
begin
|
||||
AMW_Adrs[15:8] <= DOUT[7:0];
|
||||
pgm_address <= pgm_address + 1'b1;
|
||||
state <= AMW_F4;
|
||||
end
|
||||
|
||||
AMW_F4:
|
||||
begin
|
||||
AMW_Adrs[7:0] <= DOUT[7:0];
|
||||
pgm_address <= pgm_address + 1'b1;
|
||||
state <= AMW_F5;
|
||||
end
|
||||
|
||||
AMW_F5:
|
||||
begin
|
||||
AMW_Data <= DOUT[7:0];
|
||||
pgm_address <= pgm_address + 1'b1;
|
||||
AMW_Ready <= 1'b1;
|
||||
state <= AMW_WAIT;
|
||||
end
|
||||
|
||||
AMW_WAIT:
|
||||
begin
|
||||
if (run | (Trigger == 1'b1 && Trigger_D == 1'b0))
|
||||
begin
|
||||
run <= 1'b1;
|
||||
AMW_EN <= 1'b1;
|
||||
AMW_Ready <= 1'b0;
|
||||
state <= AMW_W1;
|
||||
end
|
||||
end
|
||||
|
||||
AMW_W1:
|
||||
begin
|
||||
if (Cycle_Run) // Processing
|
||||
begin
|
||||
AMW_EN <= 1'b0;
|
||||
state <= AMW_W2;
|
||||
end
|
||||
end
|
||||
|
||||
AMW_W2:
|
||||
begin
|
||||
if (~Cycle_Run) // Write Done
|
||||
begin
|
||||
state <= AMW_F1; // Get next inst
|
||||
end
|
||||
end
|
||||
|
||||
AMW_ST_END:
|
||||
begin
|
||||
AMW_End <= 1'b1;
|
||||
if (Restart)
|
||||
begin
|
||||
AMW_End <= 1'b0;
|
||||
state <= AMW_START;
|
||||
end
|
||||
end
|
||||
|
||||
default:;
|
||||
endcase
|
||||
end
|
||||
end
|
||||
|
||||
endmodule
|
||||
+5
-2
@@ -87,8 +87,11 @@ localparam LONG_TIME = 24'h418D40; // .3 sec @ 14.32 Mhz
|
||||
|
||||
localparam EE_PROG = {20'h00000, inst_EE_INACTIVE, inst_LONG_TIMER, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE,
|
||||
inst_EE_ACTIVE, inst_START};
|
||||
localparam Cold_Boot_PROG = {1'h0, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_SHORT_TIMER, inst_EE_INACTIVE,
|
||||
inst_LONG_TIMER, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_EE_ACTIVE, inst_START};
|
||||
// Orignal Easter Egg Cold Boot
|
||||
//localparam Cold_Boot_PROG = {1'h0, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_SHORT_TIMER, inst_EE_INACTIVE,
|
||||
// inst_LONG_TIMER, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_EE_ACTIVE, inst_START};
|
||||
localparam Cold_Boot_PROG = {28'h0000000,
|
||||
inst_LONG_TIMER, inst_RESET_INACTIVE, inst_SHORT_TIMER, inst_RESET_ACTIVE, inst_START};
|
||||
|
||||
localparam inst_NULL = 4'd0;
|
||||
localparam inst_EE_ACTIVE = 4'd1;
|
||||
|
||||
+130
-123
@@ -1,6 +1,6 @@
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Project Name: CoCo3FPGA Version 5.x.x
|
||||
// File Name: coco3fpga.v
|
||||
// File Name: coco3fpga.sv
|
||||
//
|
||||
// CoCo3 in an FPGA
|
||||
//
|
||||
@@ -120,14 +120,14 @@ output [15:0] SOUND_RIGHT,
|
||||
// Needs removal.... ???
|
||||
input [3:0] PADDLE_CLK,
|
||||
input [3:0] P_SWITCH,
|
||||
// joystick input
|
||||
// digital for buttons
|
||||
input [15:0] joy1,
|
||||
input [15:0] joy2,
|
||||
// analog for position
|
||||
input [15:0] joya1,
|
||||
input [15:0] joya2,
|
||||
input joy_use_dpad,
|
||||
// joystick input
|
||||
// digital for buttons
|
||||
input [15:0] joy1,
|
||||
input [15:0] joy2,
|
||||
// analog for position
|
||||
input [15:0] joya1,
|
||||
input [15:0] joya2,
|
||||
input joy_use_dpad,
|
||||
|
||||
// Config Static switches
|
||||
input [9:0] SWITCH,
|
||||
@@ -187,9 +187,14 @@ input sdram_vid_ready,
|
||||
|
||||
input sdram_busy,
|
||||
|
||||
input AMW_Trigger,
|
||||
output AMW_ACK,
|
||||
|
||||
input [64:0] RTC,
|
||||
|
||||
input [1:0] turbo_speed
|
||||
input F_Turbo,
|
||||
input [1:0] turbo_speed,
|
||||
input [2:0] Mem_Size
|
||||
|
||||
);
|
||||
|
||||
@@ -227,13 +232,6 @@ wire [21:0] FLASH_ADDRESS;
|
||||
|
||||
wire [7:0] FLASH_DATA;
|
||||
|
||||
// LEDs
|
||||
// SRH DE2-115 has one extra Green LED
|
||||
wire [8:0] LEDG;
|
||||
//output [9:0] LEDR;
|
||||
// SRH DE2-115 has 10 extra Red LED
|
||||
wire [17:0] LEDR;
|
||||
|
||||
// Extra Buttons and Switches
|
||||
|
||||
// SRH MISTer
|
||||
@@ -246,7 +244,6 @@ wire EF;
|
||||
wire PH_2;
|
||||
reg PH_2_RAW;
|
||||
reg RESET_N;
|
||||
reg [13:0] RESET_SM;
|
||||
reg [6:0] CPU_RESET_SM;
|
||||
reg CPU_RESET;
|
||||
wire RESET_INS;
|
||||
@@ -519,8 +516,6 @@ wire RDFIFO_WRFULL;
|
||||
wire WRFIFO_RDEMPTY;
|
||||
wire WRFIFO_WRFULL;
|
||||
reg BI_IRQ_EN;
|
||||
reg [19:0] MCLOCK;
|
||||
reg [19:0] MCLOCK_DELAY;
|
||||
wire I2C_SCL_EN;
|
||||
wire I2C_DAT_EN;
|
||||
reg [7:0] I2C_DEVICE;
|
||||
@@ -657,7 +652,7 @@ wire [4:0] HOUR;
|
||||
wire [5:0] MIN;
|
||||
wire [5:0] SEC;
|
||||
|
||||
// This is a Real Time Clock. It is initialized by RTC which is provided by MISTER
|
||||
// This is a Real Time Clock. It is initialized by RTC which is provided by MISTER.
|
||||
// RTC is provided only once after reset to initialize the clock. RTC is in BCD
|
||||
// format. The output here is in BIN values. Note while CENT will roll in the clock
|
||||
// it is NOT initialized from MiSTer. As such - it is a static value set to 5'd20.
|
||||
@@ -682,61 +677,15 @@ rtc #(50000000) CC3_rtc(
|
||||
//assign PROBE[6:0] = {CART1_POL, CART1_BUF_RESET_N, CART1_FIRQ_STAT_N, CART1_CLK_N, CART1_FIRQ_N, RESET_N, PH_2};
|
||||
//assign PROBE[7:0] = {1'b0, CART1_POL, CART1_FIRQ_N, CART1_FIRQ_BUF[0], CART1_CLK_N_D, CART1_FIRQ_RESET_N, CART1_CLK_N, PH_2};
|
||||
assign PROBE[7:0] = {2'b00, cache_hit, COCO3_ROM_WRITE, ioctl_wr, ioctl_download, ioctl_index[7], ioctl_index[6]};
|
||||
assign PROBE[15:8] = LEDR[7:0];
|
||||
assign PROBE[23:16] = LEDG[7:0];
|
||||
assign PROBE[15:8] = 8'h00;
|
||||
assign PROBE[23:16] = 8'h00;
|
||||
//assign PROBE[31:24] = {3'b000, DATA_OUT[3], MOTOR, DRIVE_SEL_EXT[0], HDD_EN, ADDRESS[0]};
|
||||
assign PROBE[31:24] = {2'b00, fdc_probe[5:0]};
|
||||
|
||||
assign clk_sys = CLK_57;
|
||||
|
||||
|
||||
assign BUTTON_N[3:0] = {COCO_RESET_N, 2'b1,EE_N};
|
||||
|
||||
//assign LEDG = TRACE; // Floppy Trace
|
||||
|
||||
assign LEDG[0] = 1'b0;
|
||||
assign LEDG[1] = 1'b0;
|
||||
assign LEDG[2] = 1'b0;
|
||||
assign LEDG[3] = FLASH_CE_S;
|
||||
assign LEDG[4] = (ADDRESS == 16'hFF84); // SDRAM
|
||||
assign LEDG[5] = 1'b0;
|
||||
assign LEDG[6] = 1'b0; // SD Card activity
|
||||
assign LEDG[7] = 1'b0;
|
||||
// SRH DE2-115 Extra Green LED is unused and off
|
||||
assign LEDG[8] = 1'b0;
|
||||
|
||||
assign LEDR[0] = 1'b0;
|
||||
assign LEDR[1] = 1'b0;
|
||||
assign LEDR[2] = 1'b0;
|
||||
assign LEDR[3] = 1'b0;
|
||||
|
||||
assign LEDR[4] = 1'b0;
|
||||
assign LEDR[5] = SWITCH[6]; // SD Card inserted
|
||||
assign LEDR[6] = RESET_N;
|
||||
assign LEDR[7] = KEY[55]; // Shift Lock
|
||||
// SRH DE2-115 Extra Red LEDs are unused and off
|
||||
assign LEDR[17:8] = 10'b0000000000;
|
||||
|
||||
//Master clock divider chain
|
||||
// MCLOCK[0] = 50/2 = 25 MHz
|
||||
// MCLOCK[1] = 50/4 = 12.5 MHz
|
||||
// MCLOCK[2] = 50/8 = 6.25 MHz
|
||||
// MCLOCK[3] = 50/16 = 3.125 MHz
|
||||
// MCLOCK[4] = 50/32 = 1.5625 MHz
|
||||
// MCLOCK[5] = 50/64 = 781.25 KHz
|
||||
// MCLOCK[6] = 50/128 = 390.625 KHz
|
||||
// MCLOCK[7] = 50/256 = 195.125 KHz
|
||||
// MCLOCK[8] = 50/512 = 97.65625 KHz
|
||||
// MCLOCK[9] = 50/1024 = 48.828125 KHz
|
||||
// MCLOCK[10] = 50/2048 = 24.4140625 KHz
|
||||
// MCLOCK[11] = 50/4096 = 12.20703125 KHz
|
||||
|
||||
always @ (negedge clk_sys) //50 MHz
|
||||
begin
|
||||
MCLOCK <= MCLOCK + 1'b1;
|
||||
MCLOCK_DELAY <= MCLOCK;
|
||||
end
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
* RAM signals
|
||||
@@ -769,8 +718,8 @@ assign BLOCK_ADDRESS = ({MMU_EN, MMU_TR, ADDRESS[15:13]} == 5'b1
|
||||
({VEC_PAG_RAM, MMU_EN, MMU_TR, ADDRESS[15:8]} ==11'b01111111110) ? SAM17: // 011 1111 1110 FE00-FEFF RAM Vector page
|
||||
{9'h007, ADDRESS[15:13]};
|
||||
|
||||
assign RAM_CS = (ADDRESS[15:0]== 18'h2FFE8) ? 1'b1: // GART 1
|
||||
(ADDRESS[15:0]== 18'h2FFE9) ? 1'b1: // GART 2
|
||||
assign RAM_CS = (ADDRESS[15:0]== 16'hFFE8) ? 1'b1: // GART 1
|
||||
(ADDRESS[15:0]== 16'hFFE9) ? 1'b1: // GART 2
|
||||
({ADDRESS[15:8]}== 8'hFF) ? 1'b0: // Hardware (FF00-FFFF) always Excluded
|
||||
ROM_SEL ? 1'b0: // Internal ROM
|
||||
FLASH_CE_S ? 1'b0: // Cart ROM
|
||||
@@ -899,11 +848,11 @@ assign ENA_PAK = ({CART_SEL, MPI_CTS} == 3'b110) ? 1'b1: // ROM SLOT 3
|
||||
1'b0;
|
||||
assign ENA_DSK = ({CART_SEL, MPI_CTS} == 3'b111) ? 1'b1: // Disk C000-DFFF Slot 4
|
||||
1'b0;
|
||||
assign HDD_EN = ({MPI_SCS[0], ADDRESS[15:4]} == 13'b1111111110100) ? 1'b1: // FF40-FF4F with MPI switch = 2 or 4
|
||||
assign HDD_EN = ({MPI_SCS[0], ADDRESS[15:4]} == 13'b1111111110100) ? 1'b1: // FF40-FF4F with MPI switch = 2 or 4
|
||||
1'b0;
|
||||
assign RS232_EN = (ADDRESS[15:2] == 14'b11111111011010) ? 1'b1: //FF68-FF6B
|
||||
1'b0;
|
||||
assign SLOT3_HW = ({MPI_SCS, ADDRESS[15:5]} == 13'b1011111111010) ? 1'b1: // FF40-FF5F
|
||||
assign SLOT3_HW = ({MPI_SCS, ADDRESS[15:5]} == 13'b1011111111010) ? 1'b1: // FF40-FF5F
|
||||
1'b0;
|
||||
assign VDAC_EN = ({RW_N,ADDRESS[15:0]} == 17'H0FF7E) ? 1'b1: // FF7E
|
||||
1'b0;
|
||||
@@ -917,12 +866,12 @@ begin
|
||||
else
|
||||
begin
|
||||
if({PH_2, SLOT3_HW, RW_N} == 3'b110)
|
||||
// case (ADDRESS[4:0])
|
||||
// 5'h00:
|
||||
// begin
|
||||
case (ADDRESS[4:0])
|
||||
5'h00:
|
||||
begin
|
||||
ROM_BANK <= DATA_OUT[2:0];
|
||||
// end
|
||||
// endcase
|
||||
end
|
||||
endcase
|
||||
end
|
||||
end
|
||||
|
||||
@@ -1022,7 +971,7 @@ assign DATA_IN =
|
||||
// (ADDRESS == 16'hFF88) ? BUFF_DATA[7:0]:
|
||||
|
||||
(ADDRESS == 16'hFF8E) ? GPIO_DIR:
|
||||
(ADDRESS == 16'hFF8F) ? GPIO:
|
||||
(ADDRESS == 16'hFF8F) ? {GPIO[7:0]}:
|
||||
|
||||
(ADDRESS == 16'hFF90) ? {COCO1, MMU_EN, GIME_IRQ, GIME_FIRQ, VEC_PAG_RAM, ST_SCS, ROM}:
|
||||
(ADDRESS == 16'hFF91) ? {2'b00, TIMER_INS, 4'b0000, MMU_TR}:
|
||||
@@ -1140,6 +1089,27 @@ assign GPIO[6] = GPIO_DIR[6] ? GPIO_OUT[6]:
|
||||
assign GPIO[7] = GPIO_DIR[7] ? GPIO_OUT[7]:
|
||||
1'bZ;
|
||||
|
||||
wire [24:0] AMW_Adrs;
|
||||
wire [7:0] AMW_Data;
|
||||
wire AMW_EN;
|
||||
wire AMW_Ready;
|
||||
wire AMW_End;
|
||||
|
||||
assign AMW_ACK = AMW_End;
|
||||
|
||||
AMW coco_AMW (
|
||||
.CLK(clk_sys),
|
||||
.RESET_N(RESET_N),
|
||||
.Trigger(AMW_Trigger),
|
||||
.Restart(1'b0),
|
||||
.Cycle_Run(AMW_WR),
|
||||
.AMW_Adrs(AMW_Adrs),
|
||||
.AMW_Data(AMW_Data),
|
||||
.AMW_EN(AMW_EN),
|
||||
.AMW_Ready(AMW_Ready),
|
||||
.AMW_End(AMW_End)
|
||||
);
|
||||
|
||||
|
||||
reg end_hold;
|
||||
reg [15:0] hold_data, hold_data_L;
|
||||
@@ -1160,14 +1130,29 @@ begin
|
||||
end
|
||||
end
|
||||
|
||||
// Original SRH 1/16/22
|
||||
//assign sdram_cpu_addr = {4'b0000, BLOCK_ADDRESS[7:0], ADDRESS[12:1], ADDRESS[0]};
|
||||
assign sdram_cpu_addr = {BLOCK_ADDRESS[11:0], ADDRESS[12:1], ADDRESS[0]};
|
||||
assign sdram_cpu_din = DATA_OUT;
|
||||
localparam Sz_512K = 3'b000;
|
||||
localparam Sz_1M = 3'b001;
|
||||
localparam Sz_2M = 3'b010;
|
||||
|
||||
assign sdram_cpu_addr = (Mem_Size == Sz_512K) ? {6'h00, sdram_cpu_addr_i[18:0]}:
|
||||
(Mem_Size == Sz_1M) ? {5'b00000, sdram_cpu_addr_i[19:0]}:
|
||||
(Mem_Size == Sz_2M) ? {4'h0, sdram_cpu_addr_i[20:0]}:
|
||||
sdram_cpu_addr_i[24:0]; // 32MB space but we only have MMU addressing for 16MB
|
||||
|
||||
assign sdram_cpu_addr_i = (AMW_WR) ? AMW_Adrs:
|
||||
(GART_RD) ? {2'b00, GART_READ}:
|
||||
(GART_WR) ? {2'b00, GART_WRITE}:
|
||||
{BLOCK_ADDRESS[11:0], ADDRESS[12:1], ADDRESS[0]};
|
||||
|
||||
assign sdram_cpu_din = (AMW_WR) ? AMW_Data:
|
||||
DATA_OUT;
|
||||
|
||||
reg [24:0] sdram_cpu_addr_i;
|
||||
reg [24:0] sdram_cpu_addr_L;
|
||||
reg last_write;
|
||||
reg sdram_BE_0, sdram_BE_1;
|
||||
|
||||
reg GART_RD, GART_WR;
|
||||
reg AMW_WR;
|
||||
|
||||
wire cache_hit /* synthesis preserve */;
|
||||
assign cache_hit = (sdram_cpu_addr[24:1] == sdram_cpu_addr_L[24:1]);
|
||||
@@ -1194,6 +1179,9 @@ begin
|
||||
last_write <= 1'b1;
|
||||
sdram_BE_0 <= 1'b0;
|
||||
sdram_BE_1 <= 1'b0;
|
||||
GART_WR <= 1'b0;
|
||||
GART_RD <= 1'b0;
|
||||
AMW_WR <= 1'b0;
|
||||
end
|
||||
else
|
||||
begin
|
||||
@@ -1224,12 +1212,17 @@ begin
|
||||
end
|
||||
|
||||
if (sdram_cpu_ack)
|
||||
begin
|
||||
sdram_cpu_req <= 1'b0;
|
||||
|
||||
GART_WR <= 1'b0; // GART address has already been used in the sdram controller so - de-select it
|
||||
GART_RD <= 1'b0;
|
||||
AMW_WR <= 1'b0;
|
||||
end
|
||||
|
||||
case (CLK)
|
||||
6'h00:
|
||||
begin
|
||||
SWITCH_L <= {turbo_speed, RATE}; // Normal speed
|
||||
SWITCH_L <= {turbo_speed, (RATE | F_Turbo)}; // Normal speed
|
||||
CLK <= 6'h01;
|
||||
PH_2_RAW <= 1'b1;
|
||||
|
||||
@@ -1238,27 +1231,40 @@ begin
|
||||
begin
|
||||
cpu_ena <= 1'b1;
|
||||
|
||||
if (VMA & RAM_CS) // FFE8 is now in RAM_CS
|
||||
if (AMW_EN) // Automated Memory Write ?
|
||||
begin
|
||||
AMW_WR <= 1'b1;
|
||||
cpu_ena <= 1'b0; // Kill cpu enable
|
||||
|
||||
// Start AMW cycle
|
||||
RAM0_BE0_L <= !AMW_Adrs[0];
|
||||
RAM0_BE1_L <= AMW_Adrs[0];
|
||||
last_write <= 1'b1; // Kill cache hit
|
||||
hold <= 1'b1;
|
||||
sdram_cpu_req <= 1'b1;
|
||||
sdram_cpu_rnw <= 1'b0;
|
||||
end
|
||||
else if (VMA & RAM_CS) // FFE8 / FFE9 is now in RAM_CS
|
||||
begin
|
||||
// sdram memory cycle
|
||||
if (ADDRESS[15:0] == 18'h2FFE8) // GART
|
||||
if ((ADDRESS[15:0] == 16'hFFE8) | (ADDRESS[15:0] == 16'hFFE9)) // GART
|
||||
begin
|
||||
if (~RW_N)
|
||||
begin // Gart Write
|
||||
RAM0_BE0_L <= !GART_WRITE[0];
|
||||
RAM0_BE1_L <= GART_WRITE[0];
|
||||
sdram_cpu_addr_L <= {2'b00, GART_WRITE};
|
||||
GART_WR <= 1'b1;
|
||||
end
|
||||
else
|
||||
begin // Gart Read
|
||||
RAM0_BE0_L <= !GART_READ[0];
|
||||
RAM0_BE1_L <= GART_READ[0];
|
||||
sdram_cpu_addr_L <= {2'b00, GART_READ};
|
||||
GART_RD <= 1'b1;
|
||||
end
|
||||
hold <= 1'b1;
|
||||
sdram_cpu_req <= 1'b1;
|
||||
sdram_cpu_rnw <= RW_N;
|
||||
last_write <= ~RW_N;
|
||||
last_write <= 1'b1; // Kill cache hit on any access after GART
|
||||
end
|
||||
else // Normal CPU cycle
|
||||
// get which byte
|
||||
@@ -1332,34 +1338,34 @@ assign RESET_P = !BUTTON_N[3] // Button
|
||||
| RESET; // CTRL-ALT-DEL or CTRL-ALT-INS
|
||||
|
||||
// Make sure all resets are enabled for a long enough time to allow voltages to settle
|
||||
always @ (negedge clk_sys or posedge RESET_P) // 50 MHz / 64
|
||||
always @ (negedge clk_sys or posedge RESET_P)
|
||||
begin
|
||||
reg [24:0] RESET_SM;
|
||||
|
||||
if(RESET_P)
|
||||
begin
|
||||
RESET_SM <= 14'h0000;
|
||||
RESET_SM <= 25'd0;
|
||||
CPU_RESET <= 1'b1;
|
||||
RESET_N <= 1'b0;
|
||||
MUGS <= RESET_INS; //This is holding a <ctrl><alt><ins> across a reset to activate the Easter Egg
|
||||
end
|
||||
else
|
||||
begin
|
||||
if (MCLOCK[9] == 1'b0 && MCLOCK_DELAY[9] == 1'b1)
|
||||
case (RESET_SM)
|
||||
14'h1FFF: // time = 1.28 uS * 14336 = 18350.08 uS
|
||||
begin
|
||||
RESET_N <= 1'b1;
|
||||
CPU_RESET <= 1'b1;
|
||||
RESET_SM <= 14'h3800;
|
||||
end
|
||||
14'h3FFF: // time = 1.28 uS * 16383 = 20970.24 uS
|
||||
begin
|
||||
RESET_N <= 1'b1;
|
||||
CPU_RESET <= 1'b0;
|
||||
RESET_SM <= 14'h3FFF;
|
||||
end
|
||||
default:
|
||||
RESET_SM <= RESET_SM + 1'b1;
|
||||
endcase
|
||||
case (RESET_SM)
|
||||
25'h0800000: // time = 143 mS
|
||||
begin
|
||||
RESET_N <= 1'b1;
|
||||
CPU_RESET <= 1'b1;
|
||||
RESET_SM <= RESET_SM + 1'b1;
|
||||
end
|
||||
25'h1000000: // time = 286 mS
|
||||
begin
|
||||
RESET_N <= 1'b1;
|
||||
CPU_RESET <= 1'b0;
|
||||
end
|
||||
default:
|
||||
RESET_SM <= RESET_SM + 1'b1;
|
||||
endcase
|
||||
end
|
||||
end
|
||||
|
||||
@@ -2357,7 +2363,7 @@ begin
|
||||
MPI_CTS <= SWITCH[2:1];
|
||||
// FF8E-FF8F
|
||||
GPIO_DIR <= 8'h00;
|
||||
GPIO_OUT <= 8'h55;
|
||||
GPIO_OUT <= 8'h00;
|
||||
// FF90
|
||||
ROM <= 2'b00;
|
||||
ST_SCS <= 1'b0;
|
||||
@@ -3311,10 +3317,11 @@ assign SOUND_RIGHT = {ORCH_RIGHT, ORCH_RIGHT_EXT} + {SOUND, 8'h00};
|
||||
reg [15:0] dac_joya1;
|
||||
reg [15:0] dac_joya2;
|
||||
|
||||
always @(clk_sys) begin
|
||||
always @ (negedge clk_sys)
|
||||
begin
|
||||
|
||||
if (joy_use_dpad)
|
||||
begin
|
||||
begin
|
||||
dac_joya1[15:8] <= 8'd128;
|
||||
dac_joya1[7:0] <= 8'd128;
|
||||
|
||||
@@ -3344,33 +3351,34 @@ always @(clk_sys) begin
|
||||
|
||||
if (joy2[3]) // upimg_mounted
|
||||
dac_joya2[7:0] <= 8'd16;
|
||||
end
|
||||
end
|
||||
else
|
||||
begin
|
||||
begin
|
||||
dac_joya1 <= joya1;
|
||||
dac_joya2 <= joya2;
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
always @(posedge clk_sys) begin
|
||||
case (SEL)
|
||||
2'b00:
|
||||
always @(negedge clk_sys)
|
||||
begin
|
||||
case (SEL)
|
||||
2'b00:
|
||||
if (dac_joya2[15:10] > DTOA_CODE)
|
||||
JSTICK<=1;
|
||||
else
|
||||
JSTICK<=0;
|
||||
2'b01:
|
||||
2'b01:
|
||||
if (dac_joya2[7:2] > DTOA_CODE)
|
||||
JSTICK<=1;
|
||||
else
|
||||
JSTICK<=0;
|
||||
2'b10:
|
||||
2'b10:
|
||||
if (dac_joya1[15:10] > DTOA_CODE)
|
||||
JSTICK<=1;
|
||||
else
|
||||
JSTICK<=0;
|
||||
2'b11:
|
||||
2'b11:
|
||||
if (dac_joya1[7:2] > DTOA_CODE)
|
||||
JSTICK<=1;
|
||||
else
|
||||
@@ -3379,7 +3387,6 @@ always @(posedge clk_sys) begin
|
||||
end
|
||||
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
* Convert PS/2 keyboard to CoCo keyboard
|
||||
* Buttons
|
||||
|
||||
@@ -0,0 +1,107 @@
|
||||
--//////////////////////////////////////////////////////////////////////////////
|
||||
-- Project Name: CoCo3FPGA Version Mister
|
||||
-- File Name: coco_rom_16.vhd
|
||||
--
|
||||
-- CoCo3 in an FPGA
|
||||
--
|
||||
--//////////////////////////////////////////////////////////////////////////////
|
||||
--
|
||||
--
|
||||
--//////////////////////////////////////////////////////////////////////////////
|
||||
--
|
||||
-- Color Computer 3 compatible system on a chip
|
||||
--
|
||||
--
|
||||
-- Copyright (c) 2008 Gary Becker ([email protected])
|
||||
--
|
||||
-- All rights reserved
|
||||
--
|
||||
-- Redistribution and use in source and synthezised forms, with or without
|
||||
-- modification, are permitted provided that the following conditions are met:
|
||||
--
|
||||
-- Redistributions of source code must retain the above copyright notice,
|
||||
-- this list of conditions and the following disclaimer.
|
||||
--
|
||||
-- Redistributions in synthesized form must reproduce the above copyright
|
||||
-- notice, this list of conditions and the following disclaimer in the
|
||||
-- documentation and/or other materials provided with the distribution.
|
||||
--
|
||||
-- Neither the name of the author nor the names of other contributors may
|
||||
-- be used to endorse or promote products derived from this software without
|
||||
-- specific prior written permission.
|
||||
--
|
||||
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
-- POSSIBILITY OF SUCH DAMAGE.
|
||||
--
|
||||
-- Please report bugs to the author, but before you do so, please
|
||||
-- make sure that this is not a derivative work and that
|
||||
-- you have the latest version of this file.
|
||||
--
|
||||
-- The latest version of this file can be found at:
|
||||
-- http://groups.yahoo.com/group/CoCo3FPGA
|
||||
--
|
||||
-- File history :
|
||||
--
|
||||
--//////////////////////////////////////////////////////////////////////////////
|
||||
-- Gary Becker
|
||||
-- [email protected]
|
||||
--//////////////////////////////////////////////////////////////////////////////
|
||||
--//////////////////////////////////////////////////////////////////////////////
|
||||
-- MISTer conversion work by Stan Hodge and Alan Steremberg
|
||||
|
||||
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.std_logic_unsigned.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
entity COCO_ROM_16 is
|
||||
port (
|
||||
-- Main CPU Port
|
||||
ADDR : in std_logic_vector(3 downto 0);
|
||||
DATA : out std_logic_vector(7 downto 0)
|
||||
);
|
||||
end;
|
||||
|
||||
architecture RTL of COCO_ROM_16 is
|
||||
|
||||
type ROM_ARRAY is array(0 to 15) of std_logic_vector(7 downto 0);
|
||||
signal ROM : ROM_ARRAY:= (
|
||||
// Clear $71 [Warm Start Flag]
|
||||
x"80",x"07",x"00",x"71",x"00", -- valid, nc, nc, nc, nc, nc, nc, a24
|
||||
-- a23, a22, a21, a20, a19, a18, a17, a16
|
||||
-- a15, a14, a13, a12, a11, a10, a09, a08
|
||||
-- a07, a06, a05, a04, a03, a02, a01, a00
|
||||
-- d07, d06, d05, d04, d03, d02, d01, d00
|
||||
|
||||
// Set $C000 <- $55 [Clear D in DK identifier in rom]
|
||||
x"80",x"07",x"C0",x"00",x"55", -- valid, nc, nc, nc, nc, nc, nc, a24
|
||||
-- a23, a22, a21, a20, a19, a18, a17, a16
|
||||
-- a15, a14, a13, a12, a11, a10, a09, a08
|
||||
-- a07, a06, a05, a04, a03, a02, a01, a00
|
||||
-- d07, d06, d05, d04, d03, d02, d01, d00
|
||||
|
||||
x"00",x"00",x"00",x"00",x"00", -- valid, nc, nc, nc, nc, nc, nc, a24
|
||||
-- a23, a22, a21, a20, a19, a18, a17, a16
|
||||
-- a15, a14, a13, a12, a11, a10, a09, a08
|
||||
-- a07, a06, a05, a04, a03, a02, a01, a00
|
||||
-- d07, d06, d05, d04, d03, d02, d01, d00
|
||||
|
||||
x"00" -- valid, nc, nc, nc, nc, nc, nc, a24
|
||||
);
|
||||
|
||||
begin
|
||||
|
||||
DATA <= ROM(to_integer(unsigned(ADDR)));
|
||||
|
||||
end RTL;
|
||||
Reference in new issue
Block a user