first check in
This commit is contained in:
commit
f00b53c0f3
103 files changed
+80778
No files matched your search
@@ -0,0 +1,480 @@
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Project Name: CoCo3FPGA Version 4.0
|
||||
// File Name: uart_6551.v
|
||||
//
|
||||
// CoCo3 in an FPGA
|
||||
//
|
||||
// Revision: 4.0 07/10/16
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
//
|
||||
// CPU section copyrighted by John Kent
|
||||
// The FDC co-processor copyrighted Daniel Wallner.
|
||||
// SDRAM Controller copyrighted by XESS Corp.
|
||||
//
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
//
|
||||
// Color Computer 3 compatible system on a chip
|
||||
//
|
||||
// Version : 4.0
|
||||
//
|
||||
// Copyright (c) 2008 Gary Becker ([email protected])
|
||||
//
|
||||
// All rights reserved
|
||||
//
|
||||
// Redistribution and use in source and synthezised forms, with or without
|
||||
// modification, are permitted provided that the following conditions are met:
|
||||
//
|
||||
// Redistributions of source code must retain the above copyright notice,
|
||||
// this list of conditions and the following disclaimer.
|
||||
//
|
||||
// Redistributions in synthesized form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in the
|
||||
// documentation and/or other materials provided with the distribution.
|
||||
//
|
||||
// Neither the name of the author nor the names of other contributors may
|
||||
// be used to endorse or promote products derived from this software without
|
||||
// specific prior written permission.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
// POSSIBILITY OF SUCH DAMAGE.
|
||||
//
|
||||
// Please report bugs to the author, but before you do so, please
|
||||
// make sure that this is not a derivative work and that
|
||||
// you have the latest version of this file.
|
||||
//
|
||||
// The latest version of this file can be found at:
|
||||
// http://groups.yahoo.com/group/CoCo3FPGA
|
||||
//
|
||||
// File history :
|
||||
//
|
||||
// 1.0 Full Release
|
||||
// 2.0 Partial Release
|
||||
// 3.0 Full Release
|
||||
// 3.0.0.1 Update to fix DoD interrupt issue
|
||||
// 3.0.1.0 Update to fix 32/40 CoCO3 Text issue and add 2 Meg max memory
|
||||
// 4.0.X.X Full Release
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
// Gary Becker
|
||||
// [email protected]
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
module glb6551(
|
||||
RESET_N,
|
||||
RX_CLK,
|
||||
RX_CLK_IN,
|
||||
XTAL_CLK_IN,
|
||||
PH_2,
|
||||
DI,
|
||||
DO,
|
||||
IRQ,
|
||||
CS,
|
||||
RW_N,
|
||||
RS,
|
||||
TXDATA_OUT,
|
||||
RXDATA_IN,
|
||||
RTS,
|
||||
CTS,
|
||||
DCD,
|
||||
DTR,
|
||||
DSR
|
||||
);
|
||||
|
||||
input RESET_N;
|
||||
output RX_CLK;
|
||||
input RX_CLK_IN;
|
||||
input XTAL_CLK_IN;
|
||||
input PH_2;
|
||||
input [7:0] DI;
|
||||
output [7:0] DO;
|
||||
output IRQ;
|
||||
input [1:0] CS;
|
||||
input [1:0] RS;
|
||||
input RW_N;
|
||||
output TXDATA_OUT;
|
||||
input RXDATA_IN;
|
||||
output RTS;
|
||||
input CTS;
|
||||
input DCD;
|
||||
output DTR;
|
||||
input DSR;
|
||||
|
||||
reg [7:0] TX_BUFFER;
|
||||
reg [7:0] TX_REG;
|
||||
wire [7:0] RX_BUFFER;
|
||||
reg [7:0] RX_REG;
|
||||
wire [7:0] STATUS_REG;
|
||||
reg [7:0] CTL_REG;
|
||||
reg [7:0] CMD_REG;
|
||||
reg OVERRUN;
|
||||
reg FRAME;
|
||||
reg PARITY;
|
||||
|
||||
wire TX_DONE;
|
||||
reg TX_DONE0;
|
||||
reg TX_DONE1;
|
||||
reg TX_START;
|
||||
reg TDRE;
|
||||
reg RDRF;
|
||||
reg [10:0] TX_CLK_DIV;
|
||||
wire TX_CLK;
|
||||
wire RX_CLK;
|
||||
wire FRAME_BUF;
|
||||
wire [1:0] WORD_SELECT;
|
||||
wire RESET_X;
|
||||
wire STOP;
|
||||
wire PARITY_ERR;
|
||||
wire PAR_DIS;
|
||||
reg [7:0] LOOPBACK;
|
||||
wire RX_DATA;
|
||||
wire TX_DATA;
|
||||
reg RESET_NX;
|
||||
reg TX_CLK_REG;
|
||||
reg [1:0] READ_STATE;
|
||||
wire GOT_DATA;
|
||||
reg READY0;
|
||||
reg READY1;
|
||||
/*
|
||||
Baud rate divisors
|
||||
(for toggle of baud clock bit)
|
||||
1 50 1152
|
||||
2 75 768
|
||||
3 110 524 -0.069396
|
||||
4 135 428 -0.311526
|
||||
5 150 384
|
||||
6 300 192
|
||||
7 600 96
|
||||
8 1200 48
|
||||
9 1800 32
|
||||
A 2400 24
|
||||
B 3600 16
|
||||
C 4800 12
|
||||
D 7200 8
|
||||
E 9600 6
|
||||
F 19200 3
|
||||
*/
|
||||
|
||||
always @ (negedge XTAL_CLK_IN or negedge RESET_X)
|
||||
begin
|
||||
if(~RESET_X)
|
||||
begin
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
TX_CLK_REG <= 1'b0;
|
||||
end
|
||||
else
|
||||
case (TX_CLK_DIV)
|
||||
11'h000:
|
||||
begin
|
||||
TX_CLK_DIV <= 11'h001;
|
||||
TX_CLK_REG <= ~TX_CLK_REG;
|
||||
end
|
||||
11'h002:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'hF)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h003;
|
||||
end
|
||||
11'h005:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'hE)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h006;
|
||||
end
|
||||
11'h007:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'hD)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h008;
|
||||
end
|
||||
11'h00B:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'hC)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h00C;
|
||||
end
|
||||
11'h00F:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'hB)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h010;
|
||||
end
|
||||
11'h017:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'hA)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h018;
|
||||
end
|
||||
11'h01F:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h9)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h020;
|
||||
end
|
||||
11'h02F:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h8)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h030;
|
||||
end
|
||||
11'h05F:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h7)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h060;
|
||||
end
|
||||
11'h0BF:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h6)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h0C0;
|
||||
end
|
||||
11'h17F:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h5)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h180;
|
||||
end
|
||||
11'h1AB:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h4)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h1AC;
|
||||
end
|
||||
11'h20B:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h3)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h20C;
|
||||
end
|
||||
11'h2FF:
|
||||
begin
|
||||
if(CTL_REG[3:0] == 4'h2)
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
else
|
||||
TX_CLK_DIV <= 11'h300;
|
||||
end
|
||||
11'h47F:
|
||||
begin
|
||||
TX_CLK_DIV <= 11'h000;
|
||||
end
|
||||
default:
|
||||
begin
|
||||
TX_CLK_DIV <= TX_CLK_DIV +1'b1;
|
||||
end
|
||||
endcase
|
||||
end
|
||||
|
||||
assign TX_CLK = (CTL_REG[3:0] == 4'h0) ? XTAL_CLK_IN:
|
||||
TX_CLK_REG;
|
||||
|
||||
assign RX_CLK = (CTL_REG[4] == 1'b0) ? RX_CLK_IN:
|
||||
TX_CLK;
|
||||
|
||||
assign RESET_X = RESET_NX ? 1'b0:
|
||||
RESET_N;
|
||||
|
||||
always @ (negedge TX_CLK)
|
||||
begin
|
||||
LOOPBACK <= {LOOPBACK[6:0], TX_DATA}; //half bit time FIFO
|
||||
end
|
||||
|
||||
assign RX_DATA = (CMD_REG[4:2] == 3'b100) ? LOOPBACK[7]:
|
||||
RXDATA_IN;
|
||||
|
||||
assign TXDATA_OUT = (CMD_REG[4:2] == 3'b100) ? 1'b1:
|
||||
TX_DATA;
|
||||
|
||||
assign STATUS_REG = {!IRQ, DSR, DCD, TDRE, RDRF, OVERRUN, FRAME, PARITY};
|
||||
|
||||
assign DO = (RS == 2'b00) ? RX_REG:
|
||||
(RS == 2'b01) ? STATUS_REG:
|
||||
(RS == 2'b10) ? CMD_REG:
|
||||
CTL_REG;
|
||||
|
||||
assign IRQ = ({CMD_REG[1:0], RDRF} == 3'b011) ? 1'b0:
|
||||
({CMD_REG[3:2], CMD_REG[0], TDRE} == 4'b0111) ? 1'b0: 1'b1;
|
||||
|
||||
assign RTS = (CMD_REG[3:2] == 2'b00);
|
||||
assign DTR = ~CMD_REG[0];
|
||||
|
||||
assign STOP = (CTL_REG[7] == 1'b0) ? 1'b0: // Stop = 1
|
||||
({CTL_REG[7:5], CMD_REG[5]} == 4'b1001) ? 1'b0: // Stop >1 but 8bit word and parity
|
||||
1'b1; // Stop > 1
|
||||
|
||||
assign PAR_DIS = ~CMD_REG[5];
|
||||
assign WORD_SELECT = CTL_REG[6:5];
|
||||
|
||||
always @ (negedge PH_2 or negedge RESET_N)
|
||||
begin
|
||||
if(!RESET_N)
|
||||
RESET_NX <= 1'b1;
|
||||
else
|
||||
begin
|
||||
if({RW_N, CS, RS} == 5'b00101) // Software RESET
|
||||
RESET_NX <= 1'b1;
|
||||
else
|
||||
RESET_NX <= 1'b0;
|
||||
end
|
||||
end
|
||||
|
||||
always @ (negedge PH_2 or negedge RESET_X)
|
||||
begin
|
||||
if(!RESET_X)
|
||||
begin
|
||||
RDRF <= 1'b0;
|
||||
READ_STATE <= 2'b00;
|
||||
TX_BUFFER <= 8'h00;
|
||||
CTL_REG <= 8'h00;
|
||||
// Commador data sheet says reset value is 02
|
||||
// but Apple will not work unless it is 00
|
||||
CMD_REG <= 8'h00;
|
||||
TDRE <= 1'b1;
|
||||
TX_START <= 1'b0;
|
||||
RX_REG <= 8'h00;
|
||||
OVERRUN <= 1'b0;
|
||||
FRAME <= 1'b0;
|
||||
PARITY <= 1'b0;
|
||||
TX_DONE1 <= 1'b1;
|
||||
TX_DONE0 <= 1'b1;
|
||||
READY0 <= 1'b0;
|
||||
READY1 <= 1'b0;
|
||||
end
|
||||
else
|
||||
begin
|
||||
TX_DONE1 <= TX_DONE0; // sync TX_DONE with E clock for metastability?
|
||||
TX_DONE0 <= TX_DONE;
|
||||
READY1 <= READY0;
|
||||
READY0 <= GOT_DATA;
|
||||
case (READ_STATE)
|
||||
2'b00:
|
||||
begin
|
||||
if(READY1) //Stop bit
|
||||
begin
|
||||
RDRF <= 1'b1;
|
||||
READ_STATE <= 2'b01;
|
||||
RX_REG <= RX_BUFFER;
|
||||
OVERRUN <= 1'b0;
|
||||
PARITY <= (PARITY_ERR & !PAR_DIS);
|
||||
FRAME <= FRAME_BUF;
|
||||
end
|
||||
end
|
||||
2'b01:
|
||||
begin
|
||||
if({RW_N, CS, RS} == 5'b10100)
|
||||
begin
|
||||
RDRF <= 1'b0;
|
||||
READ_STATE <= 2'b10;
|
||||
PARITY <= 1'b0;
|
||||
OVERRUN <= 1'b0;
|
||||
FRAME <= 1'b0;
|
||||
end
|
||||
else
|
||||
begin
|
||||
if(~READY1)
|
||||
READ_STATE <= 2'b11;
|
||||
end
|
||||
end
|
||||
2'b10:
|
||||
begin
|
||||
if(~READY1)
|
||||
READ_STATE <= 2'b00;
|
||||
end
|
||||
2'b11:
|
||||
begin
|
||||
if({RW_N, CS, RS} == 5'b10100)
|
||||
begin
|
||||
RDRF <= 1'b0;
|
||||
READ_STATE <= 2'b00;
|
||||
PARITY <= 1'b0;
|
||||
OVERRUN <= 1'b0;
|
||||
FRAME <= 1'b0;
|
||||
end
|
||||
else
|
||||
begin
|
||||
if(READY1)
|
||||
begin
|
||||
RDRF <= 1'b1;
|
||||
READ_STATE <= 2'b01;
|
||||
OVERRUN <= 1'b1;
|
||||
PARITY <= (PARITY_ERR & !PAR_DIS);
|
||||
FRAME <= FRAME_BUF;
|
||||
RX_REG <= RX_BUFFER;
|
||||
end
|
||||
end
|
||||
end
|
||||
endcase
|
||||
|
||||
if({RW_N, CS, RS} == 5'b00100) // Write TX data register
|
||||
TX_REG <= DI;
|
||||
|
||||
if({RW_N, CS, RS} == 5'b00110) // Write CMD register
|
||||
CMD_REG <= DI;
|
||||
|
||||
if({RW_N, CS, RS} == 5'b00111) // Write CTL register
|
||||
CTL_REG <= DI;
|
||||
|
||||
if(~TDRE & TX_DONE1 & ~TX_START & ~(CS == 2'b01))
|
||||
begin
|
||||
TX_BUFFER <= TX_REG;
|
||||
TDRE <= 1'b1;
|
||||
TX_START <= 1'b1;
|
||||
end
|
||||
else
|
||||
begin
|
||||
if({RW_N, CS, RS} == 5'b00100) // Write TX data register
|
||||
TDRE <= 1'b0;
|
||||
if(~TX_DONE1)
|
||||
TX_START <= 1'b0;
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
uart51_tx tx(
|
||||
.RESET_N(RESET_X),
|
||||
.BAUD_CLK(TX_CLK),
|
||||
.TX_DATA(TX_DATA),
|
||||
.TX_START(TX_START),
|
||||
.TX_DONE(TX_DONE),
|
||||
.TX_STOP(STOP),
|
||||
.TX_WORD(WORD_SELECT),
|
||||
.TX_PAR_DIS(PAR_DIS),
|
||||
.TX_PARITY(CMD_REG[7:6]),
|
||||
.CTS(CTS),
|
||||
.TX_BUFFER(TX_BUFFER)
|
||||
);
|
||||
|
||||
uart51_rx rx(
|
||||
.RESET_N(RESET_X),
|
||||
.BAUD_CLK(RX_CLK),
|
||||
.RX_DATA(RX_DATA),
|
||||
.RX_BUFFER(RX_BUFFER),
|
||||
.RX_WORD(WORD_SELECT),
|
||||
.RX_PAR_DIS(PAR_DIS),
|
||||
.RX_PARITY(CMD_REG[7:6]),
|
||||
.PARITY_ERR(PARITY_ERR),
|
||||
.FRAME(FRAME_BUF),
|
||||
.READY(GOT_DATA)
|
||||
);
|
||||
|
||||
endmodule
|
||||
Reference in new issue
Block a user