CART and OS9 improvements. Cycle accurate 6809 at up to 9.54 Mhz.

CTF = Compile Time Feature...

1.	Interrupt system restored to previous code - improved compadibility.
2.	Changed to cycle accurate 6809 (Greg Miller) at speeds up to 9.56Mhz. [CTF]
3.	Recoded sdc and fdc to only have one instance of the wd1773.
4.	Re-added software disable in sdc [Ext 'g'].
5.	Recoded Cartridge bank switching to only exist when MiSTer slot 3 is selected. [removed soft multipak select]
6.	Moved CoCo Hardware RS-232 from always existing to only existing in multipak slot 1.
7.	Changed ADRS (SDS sig) decoding to = FF40-FF5f per hardware.
8.	Fixed coding problem in os9 driver llcocosdc to work with MPI properly. [CTF]
9.	Set default disk size to constant $555555 to fix os9 redirect problem. [CTF]
10	Disabled GART [GIMEX hardware DMA] to prevent OS9 from detecting GIMEX. [CTF]
11	Corrected missing begin statement in master timing loop.
12.	Fixed Donkey King DAPD issue in Tom Mix program [DPAD now moved joysticks to limits under dpad
13. Fixed incorrect addressing of FE00-FEFF for CARTs which gets PITFALL and RAMPAGE working
14.	Updated MiSTer framework
This commit is contained in:
shodge12 committed 2023-10-23 22:44:34 -04:00
1 parent 060ebb2dc3
commit d593e3fc4e
4 files changed
+97 -126

No files matched your search

+23 -11
View File
@@ -124,6 +124,12 @@ module sys_top
inout [6:0] USER_IO
);
`ifdef MISTER_DUAL_SDRAM
`ifndef MISTER_DISABLE_YC
`define MISTER_DISABLE_YC
`endif
`endif
////////////////////// Secondary SD ///////////////////////////////////
wire SD_CS, SD_CLK, SD_MOSI;
@@ -519,17 +525,6 @@ cyclonev_hps_interface_peripheral_uart uart
.txd(uart_txd)
);
wire aspi_sck,aspi_mosi,aspi_ss,aspi_miso;
cyclonev_hps_interface_peripheral_spi_master spi
(
.sclk_out(aspi_sck),
.txd(aspi_mosi), // mosi
.rxd(aspi_miso), // miso
.ss_0_n(aspi_ss),
.ss_in_n(1)
);
wire [63:0] f2h_irq = {video_sync,HDMI_TX_VS};
cyclonev_hps_interface_interrupts interrupts
(
@@ -635,11 +630,13 @@ ddr_svc ddr_svc
.ram_write(ram2_write),
.ram_bcnt(ram2_bcnt),
`ifndef MISTER_DISABLE_ALSA
.ch0_addr(alsa_address),
.ch0_burst(1),
.ch0_data(alsa_readdata),
.ch0_req(alsa_req),
.ch0_ready(alsa_ready),
`endif
.ch1_addr(pal_addr),
.ch1_burst(128),
@@ -1477,8 +1474,10 @@ audio_out audio_out
.core_l(audio_l),
.core_r(audio_r),
`ifndef MISTER_DISABLE_ALSA
.alsa_l(alsa_l),
.alsa_r(alsa_r),
`endif
.i2s_bclk(HDMI_SCLK),
.i2s_lrclk(HDMI_LRCLK),
@@ -1491,6 +1490,18 @@ audio_out audio_out
);
`ifndef MISTER_DISABLE_ALSA
wire aspi_sck,aspi_mosi,aspi_ss,aspi_miso;
cyclonev_hps_interface_peripheral_spi_master spi
(
.sclk_out(aspi_sck),
.txd(aspi_mosi), // mosi
.rxd(aspi_miso), // miso
.ss_0_n(aspi_ss),
.ss_in_n(1)
);
wire [28:0] alsa_address;
wire [63:0] alsa_readdata;
wire alsa_ready;
@@ -1517,6 +1528,7 @@ alsa alsa
.pcm_l(alsa_l),
.pcm_r(alsa_r)
);
`endif
//////////////// User I/O (USB 3.0 connector) /////////////////////////
+43 -3
View File
@@ -173,7 +173,7 @@ sys_umul #(12,12) mul(CLK_VIDEO,mul_start,mul_run, mul_arg1,mul_arg2,mul_res);
wire [11:0] wideres = mul_res[11:0] + hsize;
always @(posedge CLK_VIDEO) begin
reg [11:0] oheight,wres;
reg [11:0] oheight,htarget,wres;
reg [12:0] arxf,aryf;
reg [3:0] cnt;
reg narrow;
@@ -188,11 +188,18 @@ always @(posedge CLK_VIDEO) begin
else if(~div_start & ~div_run & ~mul_start & ~mul_run) begin
cnt <= cnt + 1'd1;
case(cnt)
// example ideal and non-ideal cases:
// [1] 720x400 4:3 VGA 80x25 text-mode (non-square pixels)
// [2] 640x480 4:3 VGA graphics mode (square pixels)
// [3] 512x512 4:3 X68000 graphics mode (non-square pixels)
0: begin
div_num <= HDMI_HEIGHT;
div_den <= vsize;
div_start <= 1;
end
// [1] 1080 / 400 -> 2
// [2] 1080 / 480 -> 2
// [3] 1080 / 512 -> 2
1: if(!div_res[11:0]) begin
// screen resolution is lower than video resolution.
@@ -206,6 +213,9 @@ always @(posedge CLK_VIDEO) begin
mul_arg2 <= div_res[11:0];
mul_start <= 1;
end
// [1] 1080 / 400 * 400 -> 800
// [2] 1080 / 480 * 480 -> 960
// [3] 1080 / 512 * 512 -> 1024
2: begin
oheight <= mul_res[11:0];
@@ -219,24 +229,39 @@ always @(posedge CLK_VIDEO) begin
mul_arg2 <= arx_i;
mul_start <= 1;
end
// [1] 1080 / 400 * 400 * 4 -> 3200
// [2] 1080 / 480 * 480 * 4 -> 3840
// [3] 1080 / 512 * 512 * 4 -> 4096
4: begin
div_num <= mul_res;
div_den <= ary_i;
div_start <= 1;
end
// [1] 1080 / 480 * 480 * 4 / 3 -> 1066
// [2] 1080 / 480 * 480 * 4 / 3 -> 1280
// [3] 1080 / 512 * 512 * 4 / 3 -> 1365
// saved as htarget
5: begin
htarget <= div_res[11:0];
div_num <= div_res;
div_den <= hsize;
div_start <= 1;
end
// computes wide scaling factor as a ceiling division
// [1] 1080 / 400 * 400 * 4 / 3 / 720 -> 1
// [2] 1080 / 480 * 480 * 4 / 3 / 640 -> 2
// [3] 1080 / 512 * 512 * 4 / 3 / 512 -> 2
6: begin
mul_arg1 <= hsize;
mul_arg2 <= div_res[11:0] ? div_res[11:0] : 12'd1;
mul_start <= 1;
end
// [1] 1080 / 400 * 400 * 4 / 3 / 720 * 720 -> 720
// [2] 1080 / 480 * 480 * 4 / 3 / 640 * 640 -> 1280
// [3] 1080 / 512 * 512 * 4 / 3 / 512 * 512 -> 1024
7: if(mul_res <= HDMI_WIDTH) begin
cnt <= 10;
@@ -247,17 +272,32 @@ always @(posedge CLK_VIDEO) begin
div_den <= hsize;
div_start <= 1;
end
// [1] 1920 / 720 -> 2
// [2] 1920 / 640 -> 3
// [3] 1920 / 512 -> 3
9: begin
mul_arg1 <= hsize;
mul_arg2 <= div_res[11:0] ? div_res[11:0] : 12'd1;
mul_start <= 1;
end
// [1] 1920 / 720 * 720 -> 1440
// [2] 1920 / 640 * 640 -> 1920
// [3] 1920 / 512 * 512 -> 1536
10: begin
narrow <= ((div_num[11:0] - mul_res[11:0]) <= (wideres - div_num[11:0])) || (wideres > HDMI_WIDTH);
wres <= wideres;
narrow <= ((htarget - mul_res[11:0]) <= (wideres - htarget)) || (wideres > HDMI_WIDTH);
wres <= mul_res[11:0] == htarget ? mul_res[11:0] : wideres;
end
// [1] 1066 - 720 = 346 <= 1440 - 1066 = 374 || 1440 > 1920 -> true
// [2] 1280 - 1280 = 0 <= 1920 - 1280 = 640 || 1920 > 1920 -> true
// [3] 1365 - 1024 = 341 <= 1536 - 1365 = 171 || 1536 > 1920 -> false
// 1. narrow flag is true when mul_res[11:0] narrow width is closer to
// htarget aspect ratio target width or when wideres wider width
// does not fit to the screen.
// 2. wres becomes wideres only when mul_res[11:0] narrow width not equal
// to target width, meaning it is not optimal for source aspect ratio.
// otherwise it is set to narrow width that is optimal.
11: begin
case(SCALE)