Introduce Coco 3 Plus for MiSTer
Add original-firmware Sound & Speech, four configurable Multi-Pak sockets, bounded per-slot ROM allocation and a nine-page menu organized around devices and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit conditional external-I/O timing contracts. Preserve native Main startup-file ordering, saved layouts, stock-core separation and the coco3plus media profile. Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh Quartus builds, functional and fitted timing checks, reviewed release packaging and passwordless SSH installation with backups. Retain original component notices, document contribution copyright and keep SSC ROM inputs outside Git. Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs, 368 both-corner timing scopes and eight tooling-integrity checks pass. The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready. Physical cold power cycling and conditional board-delay assumptions remain separate. Full original upstream histories are preserved before this single consolidated implementation commit.
This commit is contained in:
1 parent
8b8cf72d1f
commit
cb40fed3b9
126 files changed
+12795
-528
No files matched your search
@@ -0,0 +1,57 @@
|
||||
`timescale 1ns/1ps
|
||||
// Original Main init: reset1, FC4/5/6/9 with status polls after each transfer,
|
||||
// restore saved configuration with reset1, then Main's own reset0 release.
|
||||
module bh_mpi_startup_tb;
|
||||
reg clk=0;always #5 clk=~clk;
|
||||
reg power=1;reg [63:0] requested=0;
|
||||
wire [63:0] accepted,status_in;wire status_set;
|
||||
bh_mpi_config cfg(clk,power,requested,accepted,status_in,status_set);
|
||||
reg pending=0;reg [63:0] pending_value;
|
||||
always @(posedge clk)if(status_set)begin pending<=1;pending_value<=status_in;end
|
||||
reg download=0,wr=0;reg [15:0] file_index=0;
|
||||
reg [24:0] file_address=0;reg [7:0] file_data=0;
|
||||
wire [7:0] flash;wire [3:0] fault;
|
||||
actual_mpi_core dut(.clk_sys(clk),.SSC_POWER_RESET(power),.RESET_N(!power),
|
||||
.CART_SEL(1'b1),.ROM_SEL(1'b0),.PH_2(1'b0),.RW_N(1'b1),.ADDRESS(16'hc000),
|
||||
.ROM(2'b0),.SWITCH(10'd6),.DATA_OUT(8'd0),.MPI_LAYOUT(accepted[54:43]),
|
||||
.MPI_BOOT_LOADING(accepted[0]),.ioctl_download(download),.ioctl_wr(wr),
|
||||
.ioctl_index(file_index),.ioctl_addr(file_address),.ioctl_data(file_data),
|
||||
.ext_response(1'b0),.SER_IRQ(1'b1),.AMW_Trigger(1'b0),.AMW_Ready(1'b0),
|
||||
.AMW_EN(1'b0),.FLASH_DATA(flash),.MPI_ROM_FAULT(fault));
|
||||
task tick;begin @(negedge clk);#1;end endtask
|
||||
task host_poll;
|
||||
begin
|
||||
repeat(4)tick;
|
||||
if(pending)begin
|
||||
@(posedge clk);#1;requested=pending_value&~64'd1;pending=0;
|
||||
repeat(4)tick;
|
||||
end
|
||||
end
|
||||
endtask
|
||||
task stream(input [15:0] index,input [7:0] value);
|
||||
begin
|
||||
@(posedge clk);#1;file_index=index;download=1;wr=1;file_address=0;file_data=value;
|
||||
tick;
|
||||
@(posedge clk);#1;download=0;wr=0;repeat(5)tick;
|
||||
host_poll;
|
||||
end
|
||||
endtask
|
||||
initial begin
|
||||
repeat(4)tick;@(posedge clk);#1;power=0;requested=1;repeat(8)tick;
|
||||
stream(4,8'h11);
|
||||
if(requested[0]!==1'b1)$fatal(1,"Main status acknowledgement cleared init reset after FC4");
|
||||
stream(5,8'h22);stream(6,8'ha1);stream(9,8'hd4);
|
||||
if(dut.mpi_rom_valid!==4'b1001)$fatal(1,"Startup streams discarded before saved layout: valid=%b fault=%b status=%h enabled=%b",dut.mpi_rom_valid,fault,accepted,dut.mpi_rom_enabled);
|
||||
// Final saved layout differs from initial defaults: FD3 and ROM4.
|
||||
@(posedge clk);#1;requested=accepted;
|
||||
requested[54:43]={3'd1,3'd2,3'd3,3'd6};requested[13:12]=2;
|
||||
repeat(8)tick;host_poll;
|
||||
if(!requested[0])$fatal(1,"Premature status acknowledgement during saved reset");
|
||||
@(posedge clk);#1;requested[0]=0;repeat(10)tick;host_poll;
|
||||
if(accepted[54:43]!=={3'd1,3'd2,3'd3,3'd6}||dut.mpi_rom_valid!==4'b1001||fault!==0)
|
||||
$fatal(1,"Restored layout/ROMs lost or stale migration overwrote configuration");
|
||||
$display("PASS actual core MPI bindings: original Main init/status polls retain FC6/FC9 through saved layout restoration");
|
||||
$finish;
|
||||
end
|
||||
initial begin #100000;$fatal(1,"Main startup ordering watchdog");end
|
||||
endmodule
|
||||
Reference in new issue
Block a user