Introduce Coco 3 Plus for MiSTer

Add original-firmware Sound & Speech, four configurable Multi-Pak sockets,
bounded per-slot ROM allocation and a nine-page menu organized around devices
and media. Repair inherited clock/reset/CPU-memory/video paths and add explicit
conditional external-I/O timing contracts. Preserve native Main startup-file
ordering, saved layouts, stock-core separation and the coco3plus media profile.

Provide native Windows tool downloads, pinned ToolShed ROM assembly, fresh
Quartus builds, functional and fitted timing checks, reviewed release packaging
and passwordless SSH installation with backups. Retain original component
notices, document contribution copyright and keep SSC ROM inputs outside Git.

Validation: Quartus17.0.2 Build602 seed5, zero errors; 15 functional jobs,
368 both-corner timing scopes and eight tooling-integrity checks pass.
The renamed build reaches Disk BASIC, PRINT1+1 returns2 and SSC loads ready.
Physical cold power cycling and conditional board-delay assumptions remain
separate. Full original upstream histories are preserved before this single
consolidated implementation commit.
This commit is contained in:
bholman committed 2026-11-18 16:00:45 -07:00
1 parent 8b8cf72d1f
commit cb40fed3b9
126 files changed
+12795 -528

No files matched your search

+132
View File
@@ -0,0 +1,132 @@
// Original Coco 3 Plus contributions: Copyright (c) 2026 Brian K. Holman.
// Original component notices/terms retained; see COPYRIGHT.md and LICENSING.md.
// SPDX-License-Identifier: BSD-3-Clause
// PIC7040 peripherals. VCCPlus/MAME hap, Tim Lindner; notices in LICENSE.
// TI SPND001A sections 2.2,2.5,2.6 govern DDR updates, latched/level IRQs,
// and immediate automatic timer reload, where the software reference differs.
// icount_tick is one phi clock (PIC input clock /2), NOT one fabric clock.
// GPIO uses captured held requests. Input/high-impedance output bits are zero
// on this digital glue interface; this does not model external pull resistors.
module ssc_tms7000_io(input wire clk,reset,soft_reset,
output reg initialized,
input wire request,write,input wire [7:0] address,write_data,
output reg ready,output reg [7:0] read_data,
input wire icount_tick,irq1,irq3,timer_external,
input wire irq_ack,input wire [1:0] irq_ack_index,
output wire irq_valid,output wire [1:0] irq_index,
output reg gpio_request,gpio_write,output reg [1:0] gpio_port,
output reg [7:0] gpio_write_data,input wire gpio_ready,input wire [7:0] gpio_read_data);
localparam [3:0] RESET_BEGIN=0,RESET_C=1,RESET_D=2,RESET_END=3,IDLE=4,
EXECUTE=5,READ_GPIO=6,COMPLETE=7,WAIT_RELEASE=8,GPIO_WAIT=9,GPIO_RELEASE=10;
reg [3:0] state,continuation;
reg access_write;
reg [7:0] access_address,access_data,gpio_value;
reg [7:0] latch_b,latch_c,latch_d,ddr_c,ddr_d;
reg [2:0] irq_enable,irq_latched;
reg [1:0] mode_bits;
reg previous_irq1,previous_irq3,previous_external;
reg [7:0] timer_data,timer_control,timer_current,timer_capture;
reg [4:0] timer_prescale;
reg [2:0] timer_divider;
reg timer_running;
wire [2:0] flags=irq_latched|{irq3,1'b0,irq1};
wire [2:0] pending=flags&irq_enable;
assign irq_valid=|pending;
assign irq_index=pending[0]?2'd0:pending[1]?2'd1:2'd2;
wire timer_event=timer_running && icount_tick &&
(timer_control[6]?(timer_external && !previous_external):(timer_divider==3'd7));
wire pf_write=state==EXECUTE && access_write;
task gpio(input w,input [1:0] port,input [7:0] data,input [3:0] next);
begin gpio_request<=1;gpio_write<=w;gpio_port<=port;gpio_write_data<=data;
continuation<=next;state<=GPIO_WAIT;end
endtask
always @(posedge clk)begin
if(reset)begin
state<=RESET_BEGIN;continuation<=IDLE;initialized<=0;ready<=0;read_data<=0;
access_write<=0;access_address<=0;access_data<=0;gpio_value<=0;
gpio_request<=0;gpio_write<=0;gpio_port<=0;gpio_write_data<=0;
latch_b<=0;latch_c<=0;latch_d<=0;ddr_c<=0;ddr_d<=0;
irq_enable<=0;irq_latched<=0;mode_bits<=0;previous_irq1<=0;previous_irq3<=0;
previous_external<=0;timer_data<=0;timer_control<=0;timer_current<=0;
timer_capture<=0;timer_prescale<=0;timer_divider<=0;timer_running<=0;
end else begin
previous_irq1<=irq1;previous_irq3<=irq3;
if(icount_tick)previous_external<=timer_external;
if(irq_ack && irq_ack_index<3)irq_latched[irq_ack_index]<=0;
// Pulse latches survive deassertion; active levels remain visible after ack.
// New assertions win over software clears/ack on the same fabric edge.
if(irq1 && !previous_irq1)irq_latched[0]<=1;
if(irq3 && !previous_irq3)begin irq_latched[2]<=1;timer_capture<=timer_current;end
if(initialized && timer_running && icount_tick && !timer_control[6])
timer_divider<=timer_divider+3'd1;
if(initialized && timer_event)begin
if(timer_prescale==0)begin
timer_prescale<=timer_control[4:0];
if(timer_current==0)begin timer_current<=timer_data;irq_latched[1]<=1;end
else timer_current<=timer_current-8'd1;
end else timer_prescale<=timer_prescale-5'd1;
end
case(state)
RESET_BEGIN:begin
initialized<=0;ready<=0;irq_enable<=0;mode_bits<=0;timer_running<=0;
latch_b<=8'hff;latch_c<=8'hff;latch_d<=8'hff;ddr_c<=0;ddr_d<=0;
if(!gpio_ready)gpio(1,1,8'hff,RESET_C);
end
RESET_C:gpio(1,2,0,RESET_D);
RESET_D:gpio(1,3,0,RESET_END);
RESET_END:begin initialized<=1;state<=IDLE;end
IDLE:begin
if(soft_reset)state<=RESET_BEGIN;
else if(request)begin access_write<=write;access_address<=address;
access_data<=write_data;state<=EXECUTE;end
end
EXECUTE:begin
if(access_write)begin
case(access_address)
0:begin
irq_enable<={access_data[4],access_data[2],access_data[0]};mode_bits<=access_data[7:6];
if(access_data[1])irq_latched[0]<=irq1 && !previous_irq1;
if(access_data[3])irq_latched[1]<=initialized && timer_event && timer_prescale==0 && timer_current==0;
if(access_data[5])irq_latched[2]<=irq3 && !previous_irq3;
state<=COMPLETE;
end
2:begin timer_data<=access_data;state<=COMPLETE;end
3:begin
timer_control<=access_data;timer_running<=access_data[7];
if(access_data[7])begin timer_current<=timer_data;timer_prescale<=access_data[4:0];timer_divider<=0;end
state<=COMPLETE;
end
6:begin latch_b<=access_data;gpio(1,1,access_data,COMPLETE);end
8:begin latch_c<=access_data;gpio(1,2,access_data&ddr_c,COMPLETE);end
9:begin ddr_c<=access_data;gpio(1,2,latch_c&access_data,COMPLETE);end
10:begin latch_d<=access_data;gpio(1,3,access_data&ddr_d,COMPLETE);end
11:begin ddr_d<=access_data;gpio(1,3,latch_d&access_data,COMPLETE);end
default:state<=COMPLETE;
endcase
end else case(access_address)
0:begin read_data<={mode_bits,flags[2],irq_enable[2],flags[1],irq_enable[1],flags[0],irq_enable[0]};state<=COMPLETE;end
2:begin read_data<=timer_current;state<=COMPLETE;end
3:begin read_data<=timer_capture;state<=COMPLETE;end
4:gpio(0,0,0,READ_GPIO);
6:begin read_data<=latch_b;state<=COMPLETE;end
8:gpio(0,2,0,READ_GPIO);
9:begin read_data<=ddr_c;state<=COMPLETE;end
10:gpio(0,3,0,READ_GPIO);
11:begin read_data<=ddr_d;state<=COMPLETE;end
default:begin read_data<=0;state<=COMPLETE;end
endcase
end
READ_GPIO:begin
read_data<=(access_address==4)?gpio_value:(access_address==8)?
((gpio_value&~ddr_c)|(latch_c&ddr_c)):((gpio_value&~ddr_d)|(latch_d&ddr_d));
state<=COMPLETE;
end
COMPLETE:begin ready<=1;state<=WAIT_RELEASE;end
WAIT_RELEASE:if(!request)begin ready<=0;state<=IDLE;end
GPIO_WAIT:if(gpio_ready)begin gpio_value<=gpio_read_data;gpio_request<=0;state<=GPIO_RELEASE;end
GPIO_RELEASE:if(!gpio_ready)state<=continuation;
default:state<=RESET_BEGIN;
endcase
end
end
endmodule