Changes to fix Rs232 switch and add FijiNet

Fixed Rs-232 Physical/MiSTer Switch
Fixed 6551 UART to support 115200
Added slot 1 config and extra ROM [boot2.rom] to support FujiNet.
Cleaned up some suttle errors and compatibility with verilator
This commit is contained in:
shodge12 committed 2026-10-08 17:50:28 -04:00
1 parent 8b8cf72d1f
commit bbbee96a30
6 files changed
+56 -12

No files matched your search

+9 -2
View File
@@ -308,8 +308,15 @@ end
assign TX_CLK = (CTL_REG[3:0] == 4'h0) ? XTAL_CLK_IN:
TX_CLK_REG;
assign RX_CLK = (CTL_REG[4] == 1'b0) ? RX_CLK_IN:
TX_CLK;
//assign RX_CLK = (CTL_REG[4] == 1'b0) ? RX_CLK_IN:
// TX_CLK;
// Receiver clock. CTL bit 4 = 0 selects the external RxC input, which used to
// be the fixed 1.8475 MHz enable (115,200 baud): a program writing CTL=$0F
// (19,200, bit 4 clear -- the FujiNet HDB-DOS L3 cart) then transmitted at
// 19,200 but received at 115,200. RxC is taken from the baud generator
// instead; for CTL[3:0]=0 that is the same 1.8475 MHz clock as before.
assign RX_CLK = TX_CLK;
assign RESET_X = RESET_NX ? 1'b0:
RESET_N;