Sim: follow the 20260927 release
- sim.v: the coco3fpga ports changed (RED_O/GREEN_O/BLUE_O, PROBE_O/PROBE_I, Display_Debug) and so did the switch word (rs_swap, UART_INPUT, and the cart interrupt option on SWITCH[9]); mirror CoCo3.sv. SNAC inputs idle high. - rtl/ovo.v: Verilog translation of the new rtl/OVO.vhd overlay; the Makefile drops the removed Mister_Video_GIMEX.v. - PIX_CLK is now a clk_sys enable, high 2 of every 4 cycles, fed to the mixer's ce_pix. Capture video as video_mixer.sv does: on a clk_sys rising edge, one pixel per rising edge of the enable. - New reference screenshots: the release's video timing moves the picture about 2 pixels; text checks unchanged. - Commit tests/dw_boot.sh, which the dw_boot* ignore pattern was hiding. Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
This commit is contained in:
1 parent
50d76dd489
commit
9e70212e87
12 files changed
+184
-19
No files matched your search
+6
-2
@@ -156,7 +156,9 @@ pty; `tests/fujinet_boot.sh`).
|
||||
`HDB-DOS 1.5 SY6551 COCO 3`, and transmitted nothing. On a real CoCo the
|
||||
SCS line covers only `$FF40-$FF5F`, and the RS-232 Pak decodes `$FF68` from
|
||||
the address bus, so it works in any slot. **Fix:** `RS232_EN` no longer
|
||||
looks at `MPI_SCS`.
|
||||
looks at `MPI_SCS`. (Upstream's 20260927 release moved the decode to slots
|
||||
2 and 4, `MPI_SCS[0] == 1`; HDB-DOS carts can only boot from slot 3, so
|
||||
that still missed every access.)
|
||||
2. **The 19,200 cart received at 115,200.** `HDBDW3L3_19200.CCC` writes
|
||||
control `$0F`. Bit 4 = 0 selects the "external" receive clock, which
|
||||
`uart_6551.v` tied to the 1.8475 MHz enable, i.e. 115,200 baud. The cart
|
||||
@@ -173,7 +175,8 @@ pty; `tests/fujinet_boot.sh`).
|
||||
A reset cleared it, which is why "load cart, then Reset" worked. The OSD's
|
||||
"Cart Interrupt Disabled" option was not connected to anything. **Fix:** a
|
||||
cart that starts with `DK` gets a cold boot instead, the way BASIC starts
|
||||
it at power-on, and the OSD option now suppresses the autostart interrupt.
|
||||
it at power-on, and the OSD option (Debug menu, `status[19]` ->
|
||||
`SWITCH[9]`) now suppresses the autostart interrupt.
|
||||
Program paks behave as before. The sim reproduces both cases with
|
||||
`--cart-frame N`, which loads the cart after boot the way the OSD and MGL
|
||||
do.
|
||||
@@ -229,6 +232,7 @@ names and ports:
|
||||
| `rtl/rom/coco_rom_16.vhd` | `rtl/coco_rom.v` (`COCO_ROM_16`) |
|
||||
| `rtl/rom/coco3_char_rom.vhd` | `rtl/coco_rom.v` (`coco3_Char_ROM`) + `rtl/coco3_char_rom.mem` |
|
||||
| `rtl/sram/coco_ram.vhd`, `coco_vid_ram_buf.vhd` | `rtl/coco_sram.v` (`COCO_SRAM`, `COCO_VID_RAM_BUF`) |
|
||||
| `rtl/OVO.vhd` (debug / "NO ROM" overlay) | `rtl/ovo.v` (`ovo`) |
|
||||
|
||||
`make mem` (`gen_mem.py`) regenerates `rtl/coco3_char_rom.mem` from the font
|
||||
table in the VHDL and `rtl/vdac.mem` from `rtl/VDAC.mif`.
|
||||
|
||||
Reference in new issue
Block a user