Add Verilator simulation (ImGui + headless)
verilator/ runs the core on the host with the shared FM-7 / Apple-IIgs sim framework: windowed (ImGui/SDL2) or --headless, typing on a frame schedule, screenshots, text-screen dump, 6809 disassembly trace, floppy/SDC/cart/cassette, and RS-232 Pak serial debugging (TXD decoder, RXD driver, pty bridge, ACIA trace) with a minimal DriveWire server and a script to run the real FujiNet daemon against the sim. See verilator/README.md. - The VHDL the build uses (ROMs, RAMs, font) is converted to Verilog in verilator/rtl/; the VHDL CPU is not instantiated (CoCo3_CYC_ACC_6809). - sdram2.sv is simulated with its own controller logic and an SDR chip model. - run_tests.sh: boot, keyboard, disk, WIDTH 80 and HSCREEN tests, judged on the text screen and byte-for-byte against test-ref/ screenshots. rtl/wd1793.sv: spt_addr and buff_wr are declared at module scope instead of inside generate blocks. They are assigned outside those blocks; Quartus accepted it, Verilator rejected spt_addr and silently split buff_wr into a separate net. No change on the FPGA (FM-7 made the same fix). Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
This commit is contained in:
1 parent
aae1ceabf1
commit
874f4f3083
79 files changed
+81058
-2
No files matched your search
@@ -0,0 +1,102 @@
|
||||
//============================================================================
|
||||
// Verilog conversions of the CoCo3 ROM entities in rtl/rom/*.vhd.
|
||||
//
|
||||
// Line-for-line translations: same entity names, same ports, same clocking.
|
||||
// The three loadable ROMs are single-clock RAMs filled over ioctl; while a
|
||||
// write is in progress the read register holds its previous value, exactly as
|
||||
// the VHDL `if WRITE = '1' ... else DATA <= ...` does.
|
||||
//============================================================================
|
||||
|
||||
// rtl/rom/coco_rom_32K.vhd -- CoCo3 system ROM (boot0.rom, ioctl index 0)
|
||||
module COCO_ROM_32K
|
||||
(
|
||||
input [14:0] ADDR,
|
||||
output reg [7:0] DATA,
|
||||
input CLK,
|
||||
input [14:0] WR_ADDR,
|
||||
input [7:0] WR_DATA,
|
||||
input WRITE
|
||||
);
|
||||
reg [7:0] ROM [0:32767];
|
||||
always @(posedge CLK) begin
|
||||
if (WRITE) ROM[WR_ADDR] <= WR_DATA;
|
||||
else DATA <= ROM[ADDR];
|
||||
end
|
||||
endmodule
|
||||
|
||||
// rtl/rom/coco_rom_8K.vhd -- Disk BASIC ROM (boot1.rom, ioctl index 64)
|
||||
module COCO_ROM_8K
|
||||
(
|
||||
input [12:0] ADDR,
|
||||
output reg [7:0] DATA,
|
||||
input CLK,
|
||||
input [12:0] WR_ADDR,
|
||||
input [7:0] WR_DATA,
|
||||
input WRITE
|
||||
);
|
||||
reg [7:0] ROM [0:8191];
|
||||
always @(posedge CLK) begin
|
||||
if (WRITE) ROM[WR_ADDR] <= WR_DATA;
|
||||
else DATA <= ROM[ADDR];
|
||||
end
|
||||
endmodule
|
||||
|
||||
// rtl/rom/coco_rom_cart.vhd -- Program Pak, up to 128K (ioctl index 1)
|
||||
module COCO_ROM_CART
|
||||
(
|
||||
input [16:0] ADDR,
|
||||
output reg [7:0] DATA,
|
||||
input CLK,
|
||||
input [16:0] WR_ADDR,
|
||||
input [7:0] WR_DATA,
|
||||
input WRITE
|
||||
);
|
||||
reg [7:0] ROM [0:131071];
|
||||
always @(posedge CLK) begin
|
||||
if (WRITE) ROM[WR_ADDR] <= WR_DATA;
|
||||
else DATA <= ROM[ADDR];
|
||||
end
|
||||
endmodule
|
||||
|
||||
// rtl/rom/coco_rom_16.vhd -- the AMW (automatic memory write) script: three
|
||||
// {valid, a24..a0, data} records followed by a terminator. Asynchronous.
|
||||
module COCO_ROM_16
|
||||
(
|
||||
input [3:0] ADDR,
|
||||
output reg [7:0] DATA
|
||||
);
|
||||
always @(*) begin
|
||||
case (ADDR)
|
||||
// Clear $71 [Warm Start Flag]
|
||||
4'd0: DATA = 8'h80; 4'd1: DATA = 8'h07; 4'd2: DATA = 8'h00;
|
||||
4'd3: DATA = 8'h71; 4'd4: DATA = 8'h00;
|
||||
// Set $C000 <- $55 [Clear D in DK identifier in rom]
|
||||
4'd5: DATA = 8'h80; 4'd6: DATA = 8'h07; 4'd7: DATA = 8'hC0;
|
||||
4'd8: DATA = 8'h00; 4'd9: DATA = 8'h55;
|
||||
// Clear $72 [Warm Start Jump]
|
||||
4'd10: DATA = 8'h80; 4'd11: DATA = 8'h07; 4'd12: DATA = 8'h00;
|
||||
4'd13: DATA = 8'h72; 4'd14: DATA = 8'h00;
|
||||
// terminator
|
||||
default: DATA = 8'h00;
|
||||
endcase
|
||||
end
|
||||
endmodule
|
||||
|
||||
// rtl/rom/coco3_char_rom.vhd -- 4K font RAM, preloaded with the CoCo3 font
|
||||
// (verilator/rtl/coco3_char_rom.mem, extracted from the VHDL by gen_mem.py).
|
||||
// Separate write and registered-read clocks, as in the VHDL.
|
||||
module coco3_Char_ROM
|
||||
(
|
||||
input RD_CLK,
|
||||
input [11:0] ADDR_R,
|
||||
output reg [7:0] DATA_R,
|
||||
input WR_CLK,
|
||||
input WE,
|
||||
input [11:0] ADDR_W,
|
||||
input [7:0] DATA_W
|
||||
);
|
||||
reg [7:0] RAM [0:4095];
|
||||
initial $readmemh("rtl/coco3_char_rom.mem", RAM);
|
||||
always @(posedge WR_CLK) if (WE) RAM[ADDR_W] <= DATA_W;
|
||||
always @(posedge RD_CLK) DATA_R <= RAM[ADDR_R];
|
||||
endmodule
|
||||
Reference in new issue
Block a user