Fixed drive selection bug.
Code now works coping data from one sdc drive with another...
This commit is contained in:
1 parent
90672316c7
commit
7535dc87fc
2 files changed
+528
-1
No files matched your search
+1
-1
@@ -288,7 +288,7 @@ begin
|
|||||||
wr_cmd <= 1'b1;
|
wr_cmd <= 1'b1;
|
||||||
|
|
||||||
// Issue sda read command...
|
// Issue sda read command...
|
||||||
if (~l_drive)
|
if (~command[0]) // This reference to the drive must be to the command register as l_drive has not yet updated
|
||||||
sd_lba[0] <= {8'h00, 1'b0, LSN[23:1]};
|
sd_lba[0] <= {8'h00, 1'b0, LSN[23:1]};
|
||||||
else
|
else
|
||||||
sd_lba[1] <= {8'h00, 1'b0, LSN[23:1]};
|
sd_lba[1] <= {8'h00, 1'b0, LSN[23:1]};
|
||||||
|
|||||||
+527
@@ -0,0 +1,527 @@
|
|||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// Project Name: COCO3 Targeting MISTer
|
||||||
|
// File Name: sdc_top.sv
|
||||||
|
//
|
||||||
|
// CoCo SDC TOP Controller for MISTer
|
||||||
|
//
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
//
|
||||||
|
//
|
||||||
|
// CoCo SDC TOP Controller (sdc_top.sv) by Stan Hodge ([email protected])
|
||||||
|
// Copyright (c) 2022 by Stan Hodge ([email protected])
|
||||||
|
//
|
||||||
|
// All rights reserved
|
||||||
|
|
||||||
|
// Redistribution and use in source and synthezised forms, with or without
|
||||||
|
// modification, are permitted provided that the following conditions are met:
|
||||||
|
//
|
||||||
|
// Redistributions of source code must retain the above copyright notice,
|
||||||
|
// this list of conditions and the following disclaimer.
|
||||||
|
//
|
||||||
|
// Redistributions in synthesized form must reproduce the above copyright
|
||||||
|
// notice, this list of conditions and the following disclaimer in the
|
||||||
|
// documentation and/or other materials provided with the distribution.
|
||||||
|
//
|
||||||
|
// Neither the name of the author nor the names of other contributors may
|
||||||
|
// be used to endorse or promote products derived from this software without
|
||||||
|
// specific prior written permission.
|
||||||
|
//
|
||||||
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
||||||
|
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||||
|
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
||||||
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||||
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||||
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||||
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||||
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||||
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
// POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
//
|
||||||
|
// Please report bugs to the author, but before you do so, please
|
||||||
|
// make sure that this is not a derivative work and that
|
||||||
|
// you have the latest version of this file.
|
||||||
|
//
|
||||||
|
// This is a full FDC controller for 2 floppy drives. It also has a 2 drive
|
||||||
|
// cocosdc imbedded. When booting with a superfloppy, the floppy portion
|
||||||
|
// of this controller will be shutdown and the normal 4 drive fdc will take
|
||||||
|
// over dfc on a different mpi slot.
|
||||||
|
//
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
module sdc_top(
|
||||||
|
input CLK, // clock
|
||||||
|
input RESET_N, // async reset
|
||||||
|
input [3:0] ADDRESS, // i/o port addr [extended for coco]
|
||||||
|
input CLK_EN,
|
||||||
|
input [7:0] DATA_IN, // data in
|
||||||
|
output [7:0] DATA_HDD, // data out
|
||||||
|
output HALT, // DMA request
|
||||||
|
output NMI_09,
|
||||||
|
|
||||||
|
// FDC host r/w handling
|
||||||
|
|
||||||
|
input FF40_CLK, // FDC Write support
|
||||||
|
input FF40_ENA,
|
||||||
|
|
||||||
|
input HDD_EN, // FDC Read Data support
|
||||||
|
input WD1793_RD,
|
||||||
|
|
||||||
|
input WD1793_WR_CTRL, // 1793 RD & WR control signal generation
|
||||||
|
input WD1793_RD_CTRL,
|
||||||
|
|
||||||
|
// SDC I/O
|
||||||
|
input SDC_REG_W_ENA,
|
||||||
|
input SDC_REG_READ,
|
||||||
|
|
||||||
|
// SD block level interface
|
||||||
|
|
||||||
|
input [1:0] img_mounted, // signaling that new image has been mounted
|
||||||
|
input img_readonly, // mounted as read only. valid only for active bit in img_mounted
|
||||||
|
input [63:0] img_size, // size of image in bytes.
|
||||||
|
|
||||||
|
output [31:0] sd_lba[2],
|
||||||
|
output [5:0] sd_blk_cnt[2], // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
|
||||||
|
output reg [1:0] sd_rd,
|
||||||
|
output reg [1:0] sd_wr,
|
||||||
|
input [1:0] sd_ack,
|
||||||
|
|
||||||
|
// SD byte level access. Signals for 2-PORT altsyncram.
|
||||||
|
input [8:0] sd_buff_addr,
|
||||||
|
input [7:0] sd_buff_dout,
|
||||||
|
output [7:0] sd_buff_din[2],
|
||||||
|
input sd_buff_wr,
|
||||||
|
|
||||||
|
output [7:0] probe
|
||||||
|
);
|
||||||
|
|
||||||
|
wire [7:0] DRIVE_SEL_EXT;
|
||||||
|
wire MOTOR;
|
||||||
|
wire WRT_PREC;
|
||||||
|
wire DENSITY;
|
||||||
|
wire HALT_EN;
|
||||||
|
|
||||||
|
// Diagnostics only
|
||||||
|
assign probe = {2'd0, HALT_EN_RST, sd_buff_wr, WR[0], RD[0], HALT_EN, HALT};
|
||||||
|
|
||||||
|
// Generate a 8.333 Mhz enable for the fdc... and control writes
|
||||||
|
wire ena_8Mhz;
|
||||||
|
wire [5:0] div_8mhz;
|
||||||
|
|
||||||
|
assign ena_8Mhz = (div_8mhz == 6'd5) ? 1'b1: 1'b0;
|
||||||
|
|
||||||
|
always@(negedge CLK or negedge RESET_N)
|
||||||
|
begin
|
||||||
|
if (~RESET_N) div_8mhz <= 6'd0;
|
||||||
|
else
|
||||||
|
begin
|
||||||
|
if (ena_8Mhz)
|
||||||
|
div_8mhz <= 6'd0;
|
||||||
|
else
|
||||||
|
div_8mhz <= div_8mhz + 6'd1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
localparam SDC_MAGIC_CMD = 8'h43;
|
||||||
|
|
||||||
|
wire [7:0] FF40_READ_VALUE = {HALT_EN, DRIVE_SEL_EXT[3], DENSITY, WRT_PREC, MOTOR, DRIVE_SEL_EXT[2:0]};
|
||||||
|
wire SDC_EN = (FF40_READ_VALUE == SDC_MAGIC_CMD);
|
||||||
|
wire [7:0] SDC_READ_DATA;
|
||||||
|
wire sdc_always;
|
||||||
|
wire FF40_RD = ({HDD_EN, ADDRESS[3:0]} == 5'h10);
|
||||||
|
|
||||||
|
|
||||||
|
//FDC read data path. =$ff40 or wd1793(s)
|
||||||
|
assign DATA_HDD = (SDC_EN | sdc_always) ? SDC_READ_DATA:
|
||||||
|
(HDD_EN & (ADDRESS[3:1] == 3'b001)) ? SDC_READ_DATA: // FF42 & FF43
|
||||||
|
(FF40_RD) ? FF40_READ_VALUE:
|
||||||
|
(WD1793_RD) ? DATA_1793: //(1793[s])
|
||||||
|
8'h00;
|
||||||
|
|
||||||
|
wire [31:0] sdc_sd_lba[2];
|
||||||
|
wire [31:0] fdc_sd_lba[2];
|
||||||
|
wire [1:0] sdc_sd_rd;
|
||||||
|
wire [1:0] fdc_sd_rd;
|
||||||
|
wire [1:0] sdc_sd_wr;
|
||||||
|
wire [1:0] fdc_sd_wr;
|
||||||
|
wire [7:0] sdc_sd_buff_din[2];
|
||||||
|
wire [7:0] fdc_sd_buff_din[2];
|
||||||
|
wire sdc_HALT;
|
||||||
|
|
||||||
|
assign sd_lba[0:1] = (SDC_EN | sdc_always) ? sdc_sd_lba[0:1]:
|
||||||
|
fdc_sd_lba[0:1];
|
||||||
|
|
||||||
|
assign sd_rd[1:0] = (SDC_EN | sdc_always) ? sdc_sd_rd[1:0]:
|
||||||
|
fdc_sd_rd[1:0];
|
||||||
|
|
||||||
|
assign sd_wr[1:0] = (SDC_EN | sdc_always) ? sdc_sd_wr[1:0]:
|
||||||
|
fdc_sd_wr[1:0];
|
||||||
|
|
||||||
|
assign sd_buff_din[0:1] = (SDC_EN | sdc_always) ? sdc_sd_buff_din[0:1]:
|
||||||
|
fdc_sd_buff_din[0:1];
|
||||||
|
|
||||||
|
sdc coco_sdc(
|
||||||
|
.CLK(CLK), // clock
|
||||||
|
.RESET_N(RESET_N), // async reset
|
||||||
|
.ADDRESS(ADDRESS), // i/o port addr [extended for coco]
|
||||||
|
.SDC_DATA_IN(DATA_IN), // data in
|
||||||
|
.SDC_READ_DATA, // data out
|
||||||
|
|
||||||
|
.SDC_EN(SDC_EN), // SDC is active [input to sdc]
|
||||||
|
.CLK_EN(CLK_EN),
|
||||||
|
.SDC_WR(SDC_REG_W_ENA),
|
||||||
|
.SDC_RD(SDC_REG_READ),
|
||||||
|
|
||||||
|
.sdc_always(sdc_always), // SDC is active [output from sdc (sdc is turning off fdc)]
|
||||||
|
|
||||||
|
.sdc_HALT(sdc_HALT),
|
||||||
|
|
||||||
|
// SD block level interface
|
||||||
|
|
||||||
|
.img_mounted(img_mounted[1:0]), // signaling that new image has been mounted
|
||||||
|
.img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted
|
||||||
|
.img_size(img_size), // size of image in bytes.
|
||||||
|
|
||||||
|
.sd_lba(sdc_sd_lba[0:1]),
|
||||||
|
.sd_rd(sdc_sd_rd[1:0]),
|
||||||
|
.sd_wr(sdc_sd_wr[1:0]),
|
||||||
|
.sd_ack(sd_ack[1:0]),
|
||||||
|
|
||||||
|
// SD byte level access. Signals for 2-PORT altsyncram.
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(sdc_sd_buff_din[0:1]),
|
||||||
|
.sd_buff_wr(sd_buff_wr)
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// $ff40 control register [part 1]
|
||||||
|
|
||||||
|
wire [3:0] DRIVE_SEL_EXT_PRE = {DATA_IN[6], DATA_IN[2:0]};
|
||||||
|
reg [2:0] drive_index;
|
||||||
|
|
||||||
|
// SD blk system is a array of 4 systems - one for each drive.
|
||||||
|
// To keep disk track memory, we created 4 wd1793's to match the sd block interfaces
|
||||||
|
// For the interface back to the coco - we need to isolate the wd1793 the computer is talking
|
||||||
|
// to and route those feedback signals back to the coco. This is accomplished via the drive
|
||||||
|
// select. 'drive_index' identifies which controller is addressd.
|
||||||
|
|
||||||
|
|
||||||
|
always @(negedge FF40_CLK or negedge RESET_N)
|
||||||
|
begin
|
||||||
|
if(!RESET_N)
|
||||||
|
begin
|
||||||
|
DRIVE_SEL_EXT <= 8'h00;
|
||||||
|
MOTOR <= 1'b0;
|
||||||
|
WRT_PREC <= 1'b0;
|
||||||
|
DENSITY <= 1'b0;
|
||||||
|
drive_index <= 3'd0;
|
||||||
|
end
|
||||||
|
else
|
||||||
|
begin
|
||||||
|
if (FF40_ENA)
|
||||||
|
begin
|
||||||
|
DRIVE_SEL_EXT <= {4'b0000,
|
||||||
|
DATA_IN[6], // Drive Select [3] / Side Select
|
||||||
|
1'b0,
|
||||||
|
DATA_IN[1:0]}; // Drive Select [1:0] (2 drives + side select)
|
||||||
|
MOTOR <= DATA_IN[3]; // Turn on motor, not used here just checked, 0=MotorOff 1=MotorOn
|
||||||
|
WRT_PREC <= DATA_IN[4]; // Write Precompensation, not used here
|
||||||
|
DENSITY <= DATA_IN[5]; // Density, not used here just checked
|
||||||
|
case(DRIVE_SEL_EXT_PRE)
|
||||||
|
4'b0010:
|
||||||
|
drive_index <= 3'd1;
|
||||||
|
|
||||||
|
4'b0001:
|
||||||
|
drive_index <= 3'd0;
|
||||||
|
|
||||||
|
4'b1010:
|
||||||
|
drive_index <= 3'd1;
|
||||||
|
|
||||||
|
4'b1001:
|
||||||
|
drive_index <= 3'd0;
|
||||||
|
endcase
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
// $ff40 control register [part 2]
|
||||||
|
always @(negedge FF40_CLK or negedge HALT_EN_RST)
|
||||||
|
begin
|
||||||
|
if(!HALT_EN_RST)
|
||||||
|
begin
|
||||||
|
HALT_EN <= 1'b0;
|
||||||
|
end
|
||||||
|
else
|
||||||
|
begin
|
||||||
|
if (FF40_ENA)
|
||||||
|
begin
|
||||||
|
HALT_EN <= DATA_IN[7]; // Normal Halt enable, 0=Disabled 1=Enabled
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
|
||||||
|
// Control signals for the wd1793
|
||||||
|
|
||||||
|
wire INTRQ[2];
|
||||||
|
wire DRQ[2];
|
||||||
|
wire selected_DRQ;
|
||||||
|
wire selected_INTRQ;
|
||||||
|
|
||||||
|
wire WR[2];
|
||||||
|
wire RD[2];
|
||||||
|
wire RD_E[2];
|
||||||
|
//wire CE;
|
||||||
|
wire HALT_EN_RST;
|
||||||
|
wire [7:0] DATA_1793;
|
||||||
|
wire [7:0] dout[2];
|
||||||
|
reg read;
|
||||||
|
reg write;
|
||||||
|
reg read_d;
|
||||||
|
reg write_d;
|
||||||
|
reg [7:0] DATA_IN_L;
|
||||||
|
reg r_w_active;
|
||||||
|
reg clk_8Mhz_enable_found;
|
||||||
|
reg read1;
|
||||||
|
reg write1;
|
||||||
|
reg [1:0] ADDRESS_L;
|
||||||
|
|
||||||
|
assign RD[0] = (read || RD_E[0]) && (drive_index == 3'd0);
|
||||||
|
assign RD[1] = (read || RD_E[1]) && (drive_index == 3'd1);
|
||||||
|
|
||||||
|
// The idea here is to "stretch" the CPU read and write signals to ensure we catch a 8 mhz enable.
|
||||||
|
// For writes we will buffer the data out to ensure it does not go away.
|
||||||
|
// For reads it is expected that data is available asynchronusly at the cpu rate and the only reason to catch a
|
||||||
|
// 8Mhz edge is to update pointer and misc flags.
|
||||||
|
|
||||||
|
// This is very nasty code and will likely only work with the present CPU timing.
|
||||||
|
// It is heavily dependant on address and write data being available just after
|
||||||
|
// the previous cycle.
|
||||||
|
|
||||||
|
always @(negedge CLK or negedge RESET_N)
|
||||||
|
begin
|
||||||
|
if(!RESET_N)
|
||||||
|
begin
|
||||||
|
read_d <= 1'b0;
|
||||||
|
write_d <= 1'b0;
|
||||||
|
r_w_active <= 1'b0;
|
||||||
|
clk_8Mhz_enable_found <= 1'b0;
|
||||||
|
WR[0] <= 1'b0;
|
||||||
|
WR[1] <= 1'b0;
|
||||||
|
RD_E[0] <= 1'b0;
|
||||||
|
RD_E[1] <= 1'b0;
|
||||||
|
read1 <= 1'b0;
|
||||||
|
write1 <= 1'b0;
|
||||||
|
read <= 1'b0;
|
||||||
|
write <= 1'b0;
|
||||||
|
end
|
||||||
|
else
|
||||||
|
begin
|
||||||
|
|
||||||
|
// synchronizers
|
||||||
|
read1 <= WD1793_RD_CTRL & ~(SDC_EN | sdc_always);
|
||||||
|
read <= read1;
|
||||||
|
|
||||||
|
write1 <= WD1793_WR_CTRL & ~(SDC_EN | sdc_always);
|
||||||
|
write <= write1;
|
||||||
|
|
||||||
|
// delays for edge detection
|
||||||
|
read_d <= read;
|
||||||
|
write_d <= write;
|
||||||
|
|
||||||
|
if ((read1 & ~read) | (write1 & ~write))
|
||||||
|
begin
|
||||||
|
// Latch Address & Data
|
||||||
|
ADDRESS_L <= ADDRESS[1:0];
|
||||||
|
DATA_IN_L <= DATA_IN;
|
||||||
|
end
|
||||||
|
|
||||||
|
// Synchronus rising edge of write
|
||||||
|
if ((write == 1'b1) && (write_d == 1'b0))
|
||||||
|
begin
|
||||||
|
// Set Writes
|
||||||
|
r_w_active <= 1'b1;
|
||||||
|
case (drive_index)
|
||||||
|
3'd0:
|
||||||
|
WR[0] <= 1'b1;
|
||||||
|
3'd1:
|
||||||
|
WR[1] <= 1'b1;
|
||||||
|
endcase
|
||||||
|
end
|
||||||
|
|
||||||
|
// Synchronus rising edge of read
|
||||||
|
if ((read == 1'b1) && (read_d == 1'b0))
|
||||||
|
begin
|
||||||
|
r_w_active <= 1'b1;
|
||||||
|
case (drive_index)
|
||||||
|
3'd0:
|
||||||
|
RD_E[0] <= 1'b1;
|
||||||
|
3'd1:
|
||||||
|
RD_E[1] <= 1'b1;
|
||||||
|
endcase
|
||||||
|
end
|
||||||
|
|
||||||
|
// Clears
|
||||||
|
if (ena_8Mhz && r_w_active)
|
||||||
|
clk_8Mhz_enable_found <= 1'b1;
|
||||||
|
|
||||||
|
// 1 50Mhz clock later...
|
||||||
|
if (clk_8Mhz_enable_found)
|
||||||
|
begin
|
||||||
|
clk_8Mhz_enable_found <= 1'b0;
|
||||||
|
r_w_active <= 1'b0;
|
||||||
|
|
||||||
|
WR[0] <= 1'b0;
|
||||||
|
WR[1] <= 1'b0;
|
||||||
|
|
||||||
|
RD_E[0] <= 1'b0;
|
||||||
|
RD_E[1] <= 1'b0;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
|
||||||
|
// NMI from disk controller
|
||||||
|
// Selected INTRQ
|
||||||
|
assign selected_INTRQ = (drive_index == 3'd0) ? INTRQ[0]:
|
||||||
|
(drive_index == 3'd1) ? INTRQ[1]:
|
||||||
|
1'b0;
|
||||||
|
|
||||||
|
assign NMI_09 = DENSITY & selected_INTRQ; // Send NMI if Double Density (Halt Mode)
|
||||||
|
|
||||||
|
// HALT from disk controller
|
||||||
|
// Selected DRQ
|
||||||
|
assign selected_DRQ = (drive_index == 3'd0) ? DRQ[0]:
|
||||||
|
(drive_index == 3'd1) ? DRQ[1]:
|
||||||
|
1'b1;
|
||||||
|
|
||||||
|
assign HALT = (HALT_EN & ~selected_DRQ) | sdc_HALT;
|
||||||
|
|
||||||
|
assign HALT_EN_RST = RESET_N & ~selected_INTRQ; // From controller schematic
|
||||||
|
|
||||||
|
// Data bus selection
|
||||||
|
assign DATA_1793 = (drive_index == 3'd0) ? dout[0]:
|
||||||
|
(drive_index == 3'd1) ? dout[1]:
|
||||||
|
8'd0;
|
||||||
|
|
||||||
|
// The SD_BLK interface and thus the wd1793 will allways transfer 1 blk. This is blk qty - 1 per spec.
|
||||||
|
assign sd_blk_cnt[1] = 6'd0;
|
||||||
|
assign sd_blk_cnt[0] = 6'd0;
|
||||||
|
|
||||||
|
reg drive_wp[2];
|
||||||
|
reg [1:0] drive_ready = 4'B0;
|
||||||
|
reg [1:0] double_sided = 4'B0;
|
||||||
|
|
||||||
|
// As drives are mounted in MISTer this logic saves the write protect and generates ready for
|
||||||
|
// changing drives to the wd1793.
|
||||||
|
// This can also get the disk size to properly handle DS drives - TBD
|
||||||
|
|
||||||
|
// Reset of drive wp to a default of 1 removed because of persistance.
|
||||||
|
|
||||||
|
// Drive 0
|
||||||
|
|
||||||
|
always @(negedge img_mounted[0])
|
||||||
|
begin
|
||||||
|
drive_wp[0] <= img_readonly;
|
||||||
|
drive_ready[0] <= 1'b1;
|
||||||
|
double_sided[0]<= (img_size > 64'd368600) & (img_size < 64'd740000);//20'd368640;
|
||||||
|
end
|
||||||
|
|
||||||
|
// Drive 1
|
||||||
|
|
||||||
|
always @(negedge img_mounted[1])
|
||||||
|
begin
|
||||||
|
drive_wp[1] <= img_readonly;
|
||||||
|
drive_ready[1] <= 1'b1;
|
||||||
|
double_sided[1]<= (img_size > 64'd368600) & (img_size < 64'd740000);//20'd368640;
|
||||||
|
end
|
||||||
|
|
||||||
|
|
||||||
|
wd1793 #(1,1) coco_wd1793_0
|
||||||
|
(
|
||||||
|
.clk_sys(~CLK),
|
||||||
|
.ce(ena_8Mhz),
|
||||||
|
.reset(~RESET_N),
|
||||||
|
.io_en(1'b1),
|
||||||
|
.rd(RD[0]),
|
||||||
|
.wr(WR[0]),
|
||||||
|
.addr(ADDRESS_L[1:0]),
|
||||||
|
.din(DATA_IN_L),
|
||||||
|
.dout(dout[0]),
|
||||||
|
.drq(DRQ[0]),
|
||||||
|
.intrq(INTRQ[0]),
|
||||||
|
|
||||||
|
.img_mounted(img_mounted[0]),
|
||||||
|
.img_size(img_size),
|
||||||
|
|
||||||
|
.sd_lba(fdc_sd_lba[0]),
|
||||||
|
.sd_rd(fdc_sd_rd[0]),
|
||||||
|
.sd_wr(fdc_sd_wr[0]),
|
||||||
|
.sd_ack(sd_ack[0]),
|
||||||
|
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(fdc_sd_buff_din[0]),
|
||||||
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
|
.wp(drive_wp[0]),
|
||||||
|
|
||||||
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
|
.layout(~double_sided[0]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
|
.side(double_sided[0] & DRIVE_SEL_EXT[3]),
|
||||||
|
.ready(drive_ready[0]),
|
||||||
|
|
||||||
|
.input_active(0),
|
||||||
|
.input_addr(0),
|
||||||
|
.input_data(0),
|
||||||
|
.input_wr(0),
|
||||||
|
.buff_din(0)
|
||||||
|
);
|
||||||
|
|
||||||
|
wd1793 #(1,0) coco_wd1793_1
|
||||||
|
(
|
||||||
|
.clk_sys(~CLK),
|
||||||
|
.ce(ena_8Mhz),
|
||||||
|
.reset(~RESET_N),
|
||||||
|
.io_en(1'b1),
|
||||||
|
.rd(RD[1]),
|
||||||
|
.wr(WR[1]),
|
||||||
|
.addr(ADDRESS_L[1:0]),
|
||||||
|
.din(DATA_IN_L),
|
||||||
|
.dout(dout[1]),
|
||||||
|
.drq(DRQ[1]),
|
||||||
|
.intrq(INTRQ[1]),
|
||||||
|
|
||||||
|
.img_mounted(img_mounted[1]),
|
||||||
|
.img_size(img_size),
|
||||||
|
|
||||||
|
.sd_lba(fdc_sd_lba[1]),
|
||||||
|
.sd_rd(fdc_sd_rd[1]),
|
||||||
|
.sd_wr(fdc_sd_wr[1]),
|
||||||
|
.sd_ack(sd_ack[1]),
|
||||||
|
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(fdc_sd_buff_din[1]),
|
||||||
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
|
.wp(drive_wp[1]),
|
||||||
|
|
||||||
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
|
.layout(~double_sided[1]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
|
.side(double_sided[1] & DRIVE_SEL_EXT[3]),
|
||||||
|
.ready(drive_ready[1]),
|
||||||
|
|
||||||
|
.input_active(0),
|
||||||
|
.input_addr(0),
|
||||||
|
.input_data(0),
|
||||||
|
.input_wr(0),
|
||||||
|
.buff_din(0)
|
||||||
|
);
|
||||||
|
|
||||||
|
endmodule
|
||||||
Reference in new issue
Block a user