Cart start-up: cold boot "DK" carts; wire up "Cart Interrupt Disabled"
A cart loaded after boot in Multi-Pak slot 3 made CART toggle every CPU cycle forever -- the autostart of a program pak, whose CART pin is tied to Q. A disk-style ROM (HDB-DOS, Disk BASIC) never drives CART; BASIC starts it from the "DK" signature at power-on. Under the toggling, FujiNet's CFGLOAD.BIN (which re-enables the CART interrupt) hung in an endless FIRQ after 17 DriveWire reads; an OSD reset cleared it. - A cart whose first two bytes are "DK" now gets a cold boot (the existing AMW/EE_Cold_Bt path) instead of the autostart interrupt. - OSD "Cart Interrupt Disabled" (status[16] -> SWITCH[4]) was not connected; it now suppresses the slot-3 autostart interrupt. - Program paks are unchanged: Arkanoid loaded after boot still autostarts. Verified in the Verilator sim with the hardware sequence (cart loaded after boot, slot 3, no reset): the FujiNet S3 cart now reads all 98 sectors of CONFIG, matching the MiSTer after a manual reset. Regression tests unchanged. The sim gains --cart-frame N to load the cart after boot, as the OSD and MGL do; loading it before reset had hidden the problem. Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
This commit is contained in:
1 parent
874f4f3083
commit
72a50a16bb
4 files changed
+52
-7
No files matched your search
+14
-1
@@ -165,7 +165,20 @@ pty; `tests/fujinet_boot.sh`).
|
||||
generator (`RX_CLK = TX_CLK`). That is unchanged for control `$1x` and for
|
||||
baud select 0.
|
||||
|
||||
With both fixes, the L3 cart at 19,200 (the MiSTer configuration) boots from the
|
||||
3. **Slot 3 hung FujiNet's CONFIG loader.** Once a cart finished downloading
|
||||
after boot, slot 3 toggled the CART interrupt every CPU cycle, forever. That
|
||||
is right for a program pak (CART tied to Q autostarts it), but a disk-style
|
||||
ROM such as HDB-DOS never drives CART. FujiNet's `CFGLOAD.BIN` re-enables
|
||||
that interrupt and then hung in an endless FIRQ, after reading 17 sectors.
|
||||
A reset cleared it, which is why "load cart, then Reset" worked. The OSD's
|
||||
"Cart Interrupt Disabled" option was not connected to anything. **Fix:** a
|
||||
cart that starts with `DK` gets a cold boot instead, the way BASIC starts
|
||||
it at power-on, and the OSD option now suppresses the autostart interrupt.
|
||||
Program paks behave as before. The sim reproduces both cases with
|
||||
`--cart-frame N`, which loads the cart after boot the way the OSD and MGL
|
||||
do.
|
||||
|
||||
With these fixes, the L3 cart at 19,200 (the MiSTer configuration) boots from the
|
||||
real FujiNet daemon with no checksum errors, and gets to FujiNet's CONFIG
|
||||
splash. The S3 cart (115,200) reaches the CONFIG host-slots screen.
|
||||
|
||||
|
||||
Reference in new issue
Block a user