Cart start-up: cold boot "DK" carts; wire up "Cart Interrupt Disabled"

A cart loaded after boot in Multi-Pak slot 3 made CART toggle every CPU cycle
forever -- the autostart of a program pak, whose CART pin is tied to Q. A
disk-style ROM (HDB-DOS, Disk BASIC) never drives CART; BASIC starts it from
the "DK" signature at power-on. Under the toggling, FujiNet's CFGLOAD.BIN
(which re-enables the CART interrupt) hung in an endless FIRQ after 17
DriveWire reads; an OSD reset cleared it.

- A cart whose first two bytes are "DK" now gets a cold boot (the existing
  AMW/EE_Cold_Bt path) instead of the autostart interrupt.
- OSD "Cart Interrupt Disabled" (status[16] -> SWITCH[4]) was not connected;
  it now suppresses the slot-3 autostart interrupt.
- Program paks are unchanged: Arkanoid loaded after boot still autostarts.

Verified in the Verilator sim with the hardware sequence (cart loaded after
boot, slot 3, no reset): the FujiNet S3 cart now reads all 98 sectors of
CONFIG, matching the MiSTer after a manual reset. Regression tests unchanged.

The sim gains --cart-frame N to load the cart after boot, as the OSD and MGL
do; loading it before reset had hidden the problem.

Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
This commit is contained in:
Alan SterembergandClaude Opus 5.5 committed 2026-10-02 07:15:44 -04:00
1 parent 874f4f3083
commit 72a50a16bb
4 files changed
+52 -7

No files matched your search

+25 -3
View File
@@ -1206,10 +1206,13 @@ wire AMW_End;
assign AMW_ACK = AMW_End;
// Cart start-up state; see the cart_firq_enable block below.
reg cart_dk_0, cart_is_dk, cart_coldboot;
AMW coco_AMW (
.CLK(clk_sys),
.RESET_N(RESET_N),
.Trigger(AMW_Trigger),
.Trigger(AMW_Trigger | cart_coldboot), // OSD cold boot, MPI/memory change, or a "DK" cart load
.Restart(1'b0),
.Cycle_Run(AMW_WR),
.AMW_Adrs(AMW_Adrs),
@@ -1786,6 +1789,13 @@ reg cart_firq_enable;
reg firq_trig;
reg cart_lock;
// A cart loaded after boot is started one of two ways, as on a real CoCo:
// - a program pak ties CART to Q, so it gets the autostart FIRQ below
// (cart_firq_enable low: CART toggles every cycle while in slot 3);
// - a disk-style ROM (HDB-DOS, Disk BASIC: "DK" at $C000) never drives CART,
// and BASIC starts it from the signature at power-on. Such a cart gets a
// cold boot instead. Toggling CART under it made software that re-enables
// the CART interrupt -- FujiNet's CFGLOAD -- hang in an endless FIRQ.
always @(negedge clk_sys or negedge RESET_N)
begin
if(!RESET_N)
@@ -1793,17 +1803,29 @@ begin
firq_trig <= 1'b0;
cart_firq_enable <= 1'b1;
cart_lock <= 1'b0;
cart_dk_0 <= 1'b0;
cart_is_dk <= 1'b0;
cart_coldboot <= 1'b0;
end
else
begin
if ((ioctl_index[5:0] == 6'd1) & ioctl_download)
firq_trig <= 1'b1;
if ((ioctl_index[5:0] == 6'd1) & ioctl_wr)
begin
if (ioctl_addr == 25'd0) cart_dk_0 <= (ioctl_data == 8'h44); // 'D'
if (ioctl_addr == 25'd1) cart_is_dk <= cart_dk_0 & (ioctl_data == 8'h4B); // 'K'
end
if (firq_trig)
if (!ioctl_download)
begin
cart_firq_enable <= 1'b0;
cart_lock <= 1'b1;
if (cart_is_dk)
cart_coldboot <= 1'b1; // start it the way BASIC would: cold boot
else
cart_firq_enable <= 1'b0; // program pak: autostart FIRQ
end
end
end
@@ -1828,7 +1850,7 @@ begin
2'b01:
CART_INT_IN_N <= (SER_IRQ);
2'b10:
CART_INT_IN_N <= (!CART_INT_IN_N | cart_firq_enable);
CART_INT_IN_N <= (!CART_INT_IN_N | cart_firq_enable | SWITCH[4]); // SWITCH[4]: OSD "Cart Interrupt Disabled"
2'b11:
CART_INT_IN_N <= (SER_IRQ);
endcase