FujiNet Update.

Added slot1 transmit of $FF upon Cold Boot to Fujinet daemon.  Fixed set / clear of CoCo3 SAM registers to work with both reads and writes.
This commit is contained in:
shodge12 committed 2026-11-10 20:22:47 -05:00
1 parent bbbee96a30
commit 5e1b2e4c33
4 files changed
+387 -29

No files matched your search

+22 -4
View File
@@ -6,12 +6,30 @@
[done]
4. Routing RS-232 tx/rx lines to the SNAC port for initial serial debugging
of Fuji-Net interface. [done - untested]
5. Added Fujinet support.
a) Install Fujinet [seperate instruction document]
a) Slot 1 is now Fujunet only support.
b) You will need HDBDos 'HDBDW3S3' which will be autoloaded if named
BOOT2.ROM. Tested with ver 1.5 SY6551 @ 115,200 baud.
c) In the Debug menu on the OSD 'Swap Mister Uart:' is set to RS CART.
'SWAP Uart to IO:' is set to 'Off'.
d) In the 'System' page of the OSD, 'Uart Mode' Should be set to 'Fujinet'
and the baud rate to '115,200'.
e) In slot 1 ONLY [Fujinet], a cold boot issued through the OSD will cause
a firewire reset command [$FF] to be transmitted to the Fujinet daemon
which will cause the Fujinet Config screem to come up after boot.
f) The SD drive in Fujinet is configured to the CoCo3 games area on the MiSTer
storage location.
6. A bug was fixed in that this core did not allow SAM registers to be set / cleared
by reads. This was fixed with the side effect of preventing older OS9 disks
from booting. [OS9 L1v1.02]. In the OSD Debug Menu, 'SAM Wrt Only Ena' should
be set to 'Off' for true CoCo3 compadibility. Turn it on if your old OS9
disks hang.
a) This fix has moved the RTC availibility to be moved to the config data.
(see manual for details)
To Do...
1. Add Fuji-Net port.
2. Add Speech / Music cart
3. Fix Castle of Tharoggad
1. Fix Castle of Tharoggad